Sorry, my previous response was in html and not sure it has made to the
list. I did
get an error as well. So resending my response.
On 6/18/2014 6:14 AM, Mohit KUMAR DCG wrote:
Hello Murali,
-----Original Message-----
From: Murali Karicheri [mailto:m-karicheri2@xxxxxx]
Sent: Wednesday, June 11, 2014 12:21 AM
To:linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;linux-kernel@xxxxxxxxxxxxxxx;
linux-pci@xxxxxxxxxxxxxxx;devicetree@xxxxxxxxxxxxxxx; linux-
doc@xxxxxxxxxxxxxxx
Cc: Murali Karicheri; Santosh Shilimkar; Russell King; Grant Likely; Rob Herring;
Mohit KUMAR DCG; Jingoo Han; Bjorn Helgaas; Pratyush ANAND; Richard
Zhu; Kishon Vijay Abraham I; Marek Vasut; Arnd Bergmann; Pawel Moll;
Mark Rutland; Ian Campbell; Kumar Gala; Randy Dunlap
Subject: [PATCH v2 0/8] Add Keystone PCIe controller driver
This patch adds a PCIe controller driver for Keystone SoCs. This is based on v1
of the series posted to the mailing list.
1. I think your first patch is OK which handles platform specific ATU implementation.
2. For MSI part, I think you just need to add two new callbacks with pp-ops, something similar to:
pp->ops->msi_set
pp->ops->msi_clear
With these two platform specific callbacks you should be able to manage MSI handling.
So idea is that dw_msi code uses pp->ops->msi_set/clear if platform define these,
otherwise use dw_msi_set/clear (which you need to refactor from existing code)
So other than your keystone changes we expect 3 patches:
-- 1st same as you sent 1/8: for ATU handeling
-- 2nd to refactor dw_msi_set/clear: refactor from existing code
Mohit,
Thanks for your comments.
Just want to be on the same page
1. In my original patch [PATCH v2 3/8] PCI: designware: update pcie core
driver to work with dw hw version 3.65.
I had following changes:-
diff --git a/drivers/pci/host/pcie-designware.c
b/drivers/pci/host/pcie-designware.c
index e4bd19a..f985811 100644
--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
@@ -277,11 +277,15 @@ static int assign_irq(int no_irqs, struct msi_desc
*desc, int *pos)
}
set_bit(pos0 + i, pp->msi_irq_in_use);
/*Enable corresponding interrupt in MSI interrupt controller */
-res = ((pos0 + i) / 32) * 12;
-bit = (pos0 + i) % 32;
-dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, &val);
-val |= 1 << bit;
-dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, val);
+if (!(pp->version & DW_V3_65)) {
+res = ((pos0 + i) / 32) * 12;
+bit = (pos0 + i) % 32;
+dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res,
+4, &val);
+val |= 1 << bit;
+dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res,
+4, val);
+}
}
I assume you are referring to the above code for msi_set(). I missed to
add similar code change to clear_irq().
So in assign_irq()
if (pp->ops->msi_set)
pp->ops->msi_set()
Similarly in clear_irq()
if (pp->ops->msi_clear)
pp->ops->msi_clear()
*pos = pos0;
@@ -349,7 +353,10 @@ static int dw_msi_setup_irq(struct msi_chip *chip,
struct pci_dev *pdev,
*/
desc->msi_attrib.multiple = msgvec;
-msg.address_lo = virt_to_phys((void *)pp->msi_data);
+if (pp->ops->get_msi_data)
+msg.address_lo = pp->ops->get_msi_data(pp);
+else
+msg.address_lo = virt_to_phys((void *)pp->msi_data);
msg.address_hi = 0x0;
msg.data = pos;
What about this code? This requires get_msi_data() as well
-- 3rd to use pp->ops->msi_set/clear if defined.
Why not API enhancement and refactor the code in a single patch?
Murali
Pls let us know for any issue or have different opinion.
Regards
Mohit
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
