I am trying to find a solution to a Linux PCI rescan problem.
I have CentOS 6.5
[jbaker@server0 ~]$ uname -a
Linux server0 2.6.32-431.5.1.el6.x86_64 #1 SMP Wed Feb 12 00:41:43
UTC 2014 x86_64 x86_64 x86_64 GNU/Linux
I have an Altera FPGA PCIe protoboard I am trying to test in a TYAN
FT77A-B7059.
We are trying to solve some hotplug/FPGA reload issues; when we reload
the FPGA the PCI interface reloads confusing linux pci code.
After bootup the board is seen by the kernel; lscpi shows Altera FPGA
PCIe protoboard settings and config space. We can load our driver and
all is well.
When we reload the FPGA lscpi display shows all "ff" for config space.
As root I tried
echo 1 > /sys/bus/pci/rescan
But no change to lspci output.
I tried some variants
echo 1 > /sys/bus/pci/devices/0000:8a:00.0/rescan
no change to lspci output.
echo 1 > /sys/bus/pci/devices/0000:8a:00.0/remove
echo 1 > /sys/bus/pci/rescan
This removed the device and it did not show up again in lscpi.
Kernel has PCI HOTPLUG enabled:
[jbaker@server0 ~]$ cat /boot/config-2.6.32-431.el6.x86_64 | grep
HOTPLUG
CONFIG_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_HOTPLUG_MEMORY=y
CONFIG_ACPI_HOTPLUG_MEMORY_AUTO_ONLINE=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=m
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=m
[jbaker@server0 ~]$
The kernel has pciehp module loaded, I see pciehp messages in
/var/log/messages.
In other distros, on other platforms, echo 1 > /sys/bus/pci/rescan has
worked but does not appear to work here for CentOS 6.5 on this hardware.
This problem is much discussed on the web but I have yet to see a
solution discussed. I am thinking the 2.6.32-431.5.1.el6.x86_64 kernel
may require a patch(es). The rescan may not be resetting the PCIe card?
Any ideas how to get rescan to work?
Thank you,
Jon Baker
--
===================================
Jon Baker
Software Engineer
ViaSat Inc.
Cleveland OH
216-706-7800
jon.baker@xxxxxxxxxx
www.viasat.com
===================================
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
