[+cc Arnd]
On Tue, May 20, 2014 at 01:10:20AM +0400, Sergei Shtylyov wrote:
> From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
>
> Add device tree probing support to the 'pci-rcar-gen2' driver.
>
> Signed-off-by: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
> [Sergei: numerous fixes/cleanups/additions]
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
I'd like to see an ack from Simon (since it changes pci-rcar-gen2.c) and
Arnd (since he pointed out some issues with the devicetree binding).
Bjorn
> ---
> The patch is against the 'next' branch of Bjorn Helgaas' 'pci.git' repo.
>
> Changes in version 4:
> - added the descriptions for the #{address|size|interrupt}-cells and
> #interrupt-map[-mask] properties to the binding document;
> - added the interrupt-related properties to the example;
> - refreshed the patch.
>
> Changes in version 3:
> - added "renesas,pci-r8a7791" to the possible "compatible" property values;
> - removed '#ifdef CONFIG_OF' around rcar_pci_of_match[] and hence of_match_ptr()
> invocation too;
> - fixed trailing whitespace in the DT parsing code;
> - removed the wrong "renessas," prefix from the binding document's file name;
> - moved the PCI device sub-nodes from the board example to the SoC example;
> - fixed labels in the board example;
> - fixed grammar and punctuation in the binding document;
> - reworded the changelog, fixed the subject.
>
> Changes in version 2:
> - merged the binding document from a separate patch;
> - moved to the "bus-range" property parsing;
> - added example to the binding document.
>
> Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt | 66 ++++++++++++++++
> drivers/pci/host/pci-rcar-gen2.c | 31 +++++++
> 2 files changed, 95 insertions(+), 2 deletions(-)
>
> Index: pci/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
> ===================================================================
> --- /dev/null
> +++ pci/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
> @@ -0,0 +1,66 @@
> +Renesas AHB to PCI bridge
> +-------------------------
> +
> +This is the bridge used internally to connect the USB controllers to the
> +AHB. There is one bridge instance per USB port connected to the internal
> +OHCI and EHCI controllers.
> +
> +Required properties:
> +- compatible: "renesas,pci-r8a7790" for the R8A7790 SoC;
> + "renesas,pci-r8a7791" for the R8A7791 SoC.
> +- reg: A list of physical regions to access the device: the first is
> + the operational registers for the OHCI/EHCI controllers and the
> + second is for the bridge configuration and control registers.
> +- interrupts: interrupt for the device.
> +- clocks: The reference to the device clock.
> +- bus-range: The PCI bus number range; as this is a single bus, the range
> + should be specified as the same value twice.
> +- #address-cells: must be 3.
> +- #size-cells: must be 2.
> +- #interrupt-cells: must be 1.
> +- interrupt-map: standard property used to define the mapping of the PCI
> + interrupts to the GIC interrupts.
> +- interrupt-map-mask: standard property that helps to define the interrupt
> + mapping.
> +
> +Example SoC configuration:
> +
> + pci0: pci@ee090000 {
> + compatible = "renesas,pci-r8a7790";
> + clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
> + reg = <0x0 0xee090000 0x0 0xc00>,
> + <0x0 0xee080000 0x0 0x1100>;
> + interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> +
> + bus-range = <0 0>;
> + #address-cells = <3>;
> + #size-cells = <2>;
> + #interrupt-cells = <1>;
> + interrupt-map-mask = <0xff00 0 0 0x7>;
> + interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
> + 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
> + 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>;
> +
> + pci@0,1 {
> + reg = <0x800 0 0 0 0>;
> + device_type = "pci";
> + phys = <&usbphy 0 0>;
> + phy-names = "usb";
> + };
> +
> + pci@0,2 {
> + reg = <0x1000 0 0 0 0>;
> + device_type = "pci";
> + phys = <&usbphy 0 0>;
> + phy-names = "usb";
> + };
> + };
> +
> +Example board setup:
> +
> +&pci0 {
> + status = "okay";
> + pinctrl-0 = <&usb0_pins>;
> + pinctrl-names = "default";
> +};
> Index: pci/drivers/pci/host/pci-rcar-gen2.c
> ===================================================================
> --- pci.orig/drivers/pci/host/pci-rcar-gen2.c
> +++ pci/drivers/pci/host/pci-rcar-gen2.c
> @@ -98,6 +98,7 @@ struct rcar_pci_priv {
> struct resource io_res;
> struct resource mem_res;
> struct resource *cfg_res;
> + unsigned busnr;
> int irq;
> unsigned long window_size;
> };
> @@ -312,8 +313,8 @@ static int rcar_pci_setup(int nr, struct
> pci_add_resource(&sys->resources, &priv->io_res);
> pci_add_resource(&sys->resources, &priv->mem_res);
>
> - /* Setup bus number based on platform device id */
> - sys->busnr = to_platform_device(priv->dev)->id;
> + /* Setup bus number based on platform device id / of bus-range */
> + sys->busnr = priv->busnr;
> return 1;
> }
>
> @@ -366,6 +367,23 @@ static int rcar_pci_probe(struct platfor
>
> priv->window_size = SZ_1G;
>
> + if (pdev->dev.of_node) {
> + struct resource busnr;
> + int ret;
> +
> + ret = of_pci_parse_bus_range(pdev->dev.of_node, &busnr);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "failed to parse bus-range\n");
> + return ret;
> + }
> +
> + priv->busnr = busnr.start;
> + if (busnr.end != busnr.start)
> + dev_warn(&pdev->dev, "only one bus number supported\n");
> + } else {
> + priv->busnr = pdev->id;
> + }
> +
> hw_private[0] = priv;
> memset(&hw, 0, sizeof(hw));
> hw.nr_controllers = ARRAY_SIZE(hw_private);
> @@ -377,11 +395,20 @@ static int rcar_pci_probe(struct platfor
> return 0;
> }
>
> +static struct of_device_id rcar_pci_of_match[] = {
> + { .compatible = "renesas,pci-r8a7790", },
> + { .compatible = "renesas,pci-r8a7791", },
> + { },
> +};
> +
> +MODULE_DEVICE_TABLE(of, rcar_pci_of_match);
> +
> static struct platform_driver rcar_pci_driver = {
> .driver = {
> .name = "pci-rcar-gen2",
> .owner = THIS_MODULE,
> .suppress_bind_attrs = true,
> + .of_match_table = rcar_pci_of_match,
> },
> .probe = rcar_pci_probe,
> };
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
