On Mon, May 12, 2014 at 11:57:47AM +0100, Phil Edworthy wrote: > This is version 8 of a PCIe Host driver for the R-Car Gen2 devices, > i.e. R-Car H2 (r8a7790) and R-Car M2 (r8a7791). > > v8: > - Platform changes removed from this patch set > - Moved header file contents into c file > - Formatting cleaned up > - Remove bus/dev/func range checks for config access > - Add comment about config access serialization > - Made rcar_pcie_setup_window() return void as no errors possible > - Remove unused register definitions > - Removed __init markers to fix section mismatches > - Add explicit bus number range > - Get the root bus nr from config writes instead of sys->busnr > - Use PCI domains > - Removed unused variable in rcar_msi_free() > - Split interrupt bindings into separate cells > > v7: > - Change binding description of clocks to 'clock specifiers' > > v6: > - Correct DT bindings description for reg and clocks > - Split device and board DT changes > - Add shmobile to subject for shmobile DT patches > - Don't check MSI irq number is valid, as upper level checks this > - Change "Unexpected MSI" msg to debug level > - Reword "Unexpected MSI" comment so that it's one line > - Remove patch that adds HAVE_ARM_ARCH_TIMER to koelsch defconfig as not needed > > v5: > - Use module_platform_driver instead of subsys_initcall > - Use the of_device_id data field for HW init function > - Init hw_pci struct in declaration > - Renesas SoC compatible string has peripheral before device name > - Add PCIe bus clock reference > - Use dma-ranges property to specify inbound memory regions > - Support multiple IO windows and correct resources > - Return IRQ_NONE from MSI isr when there is no pending MSI > - Add additional interrupt bindings > > v4: > - Use runtime PM properly > > Phil Edworthy (3): > PCI: host: rcar: Add Renesas R-Car PCIe driver > PCI: host: rcar: Add MSI support > dt-bindings: pci: rcar pcie device tree bindings > > Documentation/devicetree/bindings/pci/rcar-pci.txt | 47 + > drivers/pci/host/Kconfig | 6 + > drivers/pci/host/Makefile | 1 + > drivers/pci/host/pcie-rcar.c | 1008 ++++++++++++++++++++ > 4 files changed, 1062 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pci/rcar-pci.txt > create mode 100644 drivers/pci/host/pcie-rcar.c Applied with Simon's ack to pci/host-rcar for v3.16, thanks! Bjorn -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
