Add two quirks to support thunderbolt suspend/resume on apple systems.
We need to perform two different actions during suspend and resume:
The whole controller has to be powered down before suspend. If this is
not done then the NHI device will be gone after resume if a thunderbolt
device was plugged in while suspending. The controller represents itself
as multiple PCI devices/bridges. To power it down we hook into the
upstream bridge of the controller and call the magic ACPI methods.
Power will be restored automatically during resume (by the firmware
presumably).
During resume we have to wait for the NHI do reestablish all pci
tunnels. Since there is no parent-child relationship between the NHI and
the bridges we have to explicitly wait for them using
device_pm_wait_for_dev. We do this in the resume_noirq phase of the
downstream bridges of the controller (which lead into the thunderbolt
tunnels).
Signed-off-by: Andreas Noever <andreas.noever@xxxxxxxxx>
---
drivers/pci/quirks.c | 122 +++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 122 insertions(+)
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index af2eba1..e010340 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -2992,6 +2992,128 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CHELSIO, 0x0030,
DECLARE_PCI_FIXUP_HEADER(0x1814, 0x0601, /* Ralink RT2800 802.11n PCI */
quirk_broken_intx_masking);
+/* Apple systems with a Cactus Ridge Thunderbolt controller. */
+static struct dmi_system_id apple_thunderbolt_whitelist[] = {
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro9"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro10"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBookAir5"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBookAir6"),
+ },
+ },
+ { }
+};
+
+/*
+ * Apple: Shutdown Cactus Ridge Thunderbolt controller.
+ *
+ * On Apple hardware the Cactus Ridge Thunderbolt controller needs to be
+ * shutdown before suspend. Otherwise the native host interface (NHI) will not
+ * be present after resume if a device was plugged in before suspend.
+ *
+ * The thunderbolt controller consists of a pcie switch with downstream
+ * bridges leading to the NHI and to the tunnel pci bridges.
+ *
+ * This quirk cuts power to the whole chip. Therefore we have to apply it
+ * during suspend_noirq of the upstream bridge.
+ *
+ * Power is automagically restored before resume. No action is needed.
+ */
+static void quirk_apple_poweroff_thunderbolt(struct pci_dev *dev)
+{
+#ifdef CONFIG_ACPI
+ acpi_handle bridge, SXIO, SXFP, SXLV;
+ if (!dmi_check_system(apple_thunderbolt_whitelist))
+ return;
+ if (pci_pcie_type(dev) != PCI_EXP_TYPE_UPSTREAM)
+ return;
+ bridge = ACPI_HANDLE(&dev->dev);
+ if (!bridge)
+ return;
+ /*
+ * TB bridges in external devices might have the same device id as those
+ * on the host, but they will not have the associated ACPI methods. This
+ * implicitly checks that we are at the right bridge.
+ */
+ if (ACPI_FAILURE(acpi_get_handle(bridge, "DSB0.NHI0.SXIO", &SXIO))
+ || ACPI_FAILURE(acpi_get_handle(bridge, "DSB0.NHI0.SXFP", &SXFP))
+ || ACPI_FAILURE(acpi_get_handle(bridge, "DSB0.NHI0.SXLV", &SXLV)))
+ return;
+ dev_info(&dev->dev, "quirk: cutting power to thunderbolt controller...\n");
+
+ /* magic sequence */
+ acpi_execute_simple_method(SXIO, NULL, 1);
+ acpi_execute_simple_method(SXFP, NULL, 0);
+ msleep(300);
+ acpi_execute_simple_method(SXLV, NULL, 0);
+ acpi_execute_simple_method(SXIO, NULL, 0);
+ acpi_execute_simple_method(SXLV, NULL, 0);
+#endif
+}
+DECLARE_PCI_FIXUP_SUSPEND_LATE(PCI_VENDOR_ID_INTEL, 0x1547,
+ quirk_apple_poweroff_thunderbolt);
+
+/*
+ * Apple: Wait for the thunderbolt controller to reestablish pci tunnels.
+ *
+ * During suspend the thunderbolt controller is reset and all pci
+ * tunnels are lost. The NHI driver will try to reestablish all tunnels
+ * during resume. We have to manually wait for the NHI since there is
+ * no parent child relationship between the NHI and the tunneled
+ * bridges.
+ */
+static void quirk_apple_wait_for_thunderbolt(struct pci_dev *dev)
+{
+#ifdef CONFIG_ACPI
+ struct pci_dev *sibling = NULL;
+ struct pci_dev *nhi = NULL;
+ if (!dmi_check_system(apple_thunderbolt_whitelist))
+ return;
+ if (pci_pcie_type(dev) != PCI_EXP_TYPE_DOWNSTREAM)
+ return;
+ /*
+ * Find the NHI and confirm that we are a bridge on the tb host
+ * controller and not on a tb endpoint.
+ */
+ sibling = pci_get_slot(dev->bus, 0x0);
+ if (sibling == dev)
+ goto out; /* we are the downstream bridge to the NHI */
+ if (!sibling || !sibling->subordinate)
+ goto out;
+ nhi = pci_get_slot(sibling->subordinate, 0x0);
+ if (!nhi)
+ goto out;
+ if (nhi->vendor != PCI_VENDOR_ID_INTEL || nhi->device != 0x1547
+ || nhi->subsystem_vendor != 0x2222
+ || nhi->subsystem_device != 0x1111)
+ goto out;
+ dev_info(&dev->dev, "quirk: wating for thunderbolt to reestablish pci tunnels...\n");
+ device_pm_wait_for_dev(&dev->dev, &nhi->dev);
+out:
+ pci_dev_put(nhi);
+ pci_dev_put(sibling);
+#endif
+}
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, 0x1547,
+ quirk_apple_wait_for_thunderbolt);
+
static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f,
struct pci_fixup *end)
{
--
1.9.3
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
