On 5/15/2014 2:20 PM, Arnd Bergmann wrote:
On Thursday 15 May 2014 13:45:08 Murali Karicheri wrote:
+#ifdef CONFIG_PCI_KEYSTONE
+/*
+ * The KeyStone PCIe controller has maximum read request size of 256 bytes.
+ */
+static void quirk_limit_readrequest(struct pci_dev *dev)
+{
+ int readrq = pcie_get_readrq(dev);
+
+ if (readrq > 256)
+ pcie_set_readrq(dev, 256);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_limit_readrequest);
+#endif /* CONFIG_PCI_KEYSTONE */
This doesn't work: you can't just limit do this for all devices just based
on PCI_KEYSTONE being enabled, you have to check if you are actually using
this controller.
Arnd
I assume, I need to check if PCI controller's vendor ID/ device ID
match with the keystone
PCI controller's ID and call pcie_set_readrq() for all of the slave
PCI devices and do this fixup.
Is this correct understanding? If you can point me to an example code
for this that will be
really helpful so that I can avoid re-inventing the wheel.
I think it would be best to move the quirk into the keystone pci driver
and compare compare the dev->driver pointer of the PCI controller device.
Arnd
Arnd,
I will move this quirk to keystone pci driver. So in that case, I guess
your original comment
is not applicable as this quirk gets enabled only with PCI keystone
driver enabled. Right?
Murali
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
