Re: [PATCH 4/4] x86/gart: Tidy messages and add bridge device info

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



* Bjorn Helgaas <bhelgaas@xxxxxxxxxx> wrote:

> Print the AGP bridge info the same way as the rest of the kernel, e.g.,
> "0000:00:04.0" instead of "00:04:00".
> 
> Also print the AGP aperture address range the same way we print resources,
> and label it explicitly as a bus address range.
> 
> No functional change.
> 
> Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
> ---
>  arch/x86/kernel/aperture_64.c |   20 ++++++++++++--------
>  1 file changed, 12 insertions(+), 8 deletions(-)
> 
> diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c
> index 9fa8aa051f54..4dd76d3df056 100644
> --- a/arch/x86/kernel/aperture_64.c
> +++ b/arch/x86/kernel/aperture_64.c
> @@ -126,10 +126,12 @@ static u32 __init read_agp(int bus, int slot, int func, int cap, u32 *order)
>  	u64 aper;
>  	u32 old_order;
>  
> -	printk(KERN_INFO "AGP bridge at %02x:%02x:%02x\n", bus, slot, func);
> +	printk(KERN_INFO "pci 0000:%02x:%02x.%d: AGP bridge\n", bus, slot,
> +	       func);

Please leave it on a single line - checkpatch warning nonwithstanding. 
pr_info() is also useful.

>  	apsizereg = read_pci_config_16(bus, slot, func, cap + 0x14);
>  	if (apsizereg == 0xffffffff) {
> -		printk(KERN_ERR "APSIZE in AGP bridge unreadable\n");
> +		printk(KERN_ERR "pci 0000:%02x:%02x.%d: APSIZE unreadable\n",
> +		       bus, slot, func);

Here too you can also use pr_err() to shorten the line.

>  		return 0;
>  	}
>  
> @@ -153,16 +155,18 @@ static u32 __init read_agp(int bus, int slot, int func, int cap, u32 *order)
>  	 * On some sick chips, APSIZE is 0. It means it wants 4G
>  	 * so let double check that order, and lets trust AMD NB settings:
>  	 */
> -	printk(KERN_INFO "Aperture from AGP @ %Lx old size %u MB\n",
> -			aper, 32 << old_order);
> +	printk(KERN_INFO "pci 0000:%02x:%02x.%d: AGP aperture [bus %Lx-%Lx] old size %u MB\n",
> +	       bus, slot, func, aper, aper + (32 << old_order) - 1,
> +	       32 << old_order);
>  	if (aper + (32ULL<<(20 + *order)) > 0x100000000ULL) {
> -		printk(KERN_INFO "Aperture size %u MB (APSIZE %x) is not right, using settings from NB\n",
> -				32 << *order, apsizereg);
> +		printk(KERN_INFO "pci 0000:%02x:%02x.%d: AGP aperture size %u MB (APSIZE %x) is not right, using settings from NB\n",
> +		       bus, slot, func, 32 << *order, apsizereg);
>  		*order = old_order;
>  	}
>  
> -	printk(KERN_INFO "Aperture from AGP @ %Lx size %u MB (APSIZE %x)\n",
> -			aper, 32 << *order, apsizereg);
> +	printk(KERN_INFO "pci 0000:%02x:%02x.%d: AGP aperture [bus %Lx-%Lx] size %u MB (APSIZE %x)\n",
> +	       bus, slot, func, aper, aper + (32 << *order) - 1, 32 << *order,
> +	       apsizereg);
>  
>  	if (!aperture_valid(aper, (32*1024*1024) << *order, 32<<20))
>  		return 0;

Also, you could add:

#define PREFIX "PCI/gart: "

or something like that, to define a standard prefix for these 
messages.

Btw., this file could be moved to arch/x86/pci/?

Otherwise:

  Acked-by: Ingo Molnar <mingo@xxxxxxxxxx>

Thanks,

	Ingo
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux