On Fri, 2014-04-18 at 12:10 +0200, Sebastian Ott wrote: > On Fri, 18 Apr 2014, Benjamin Herrenschmidt wrote: > > On Thu, 2014-04-17 at 19:46 +0200, Sebastian Ott wrote: > > > > > pci: move open fabric devspec attribute to pci common code > > > > > > Move the devspec OF attribute to pci common code's set of device > > > attributes since it's not architecture dependent. > > > As a side effect microblaze and powerpc no longer need to use > > > pcibios_add_platform_entries. > > > > > > Link: https://lkml.kernel.org/r/alpine.LFD.2.11.1404141101500.1529@denkbrett > > > Signed-off-by: Sebastian Ott <sebott@xxxxxxxxxxxxxxxxxx> > > > > Acked-by: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx> > > > > (Pending you've compile tested it on powerpc, I'm on vacation and > > haven't done it :) > > I did: > make ARCH=powerpc CROSS_COMPILE=powerpc64-4.3.2- g5_defconfig > make ARCH=powerpc CROSS_COMPILE=powerpc64-4.3.2- > > and failed with: > CC arch/powerpc/lib/xor_vmx.o > In file included from include/linux/list.h:4, > from include/linux/preempt.h:10, > from arch/powerpc/lib/xor_vmx.c:22: > include/linux/types.h:29: error: both ‘unsigned’ and ‘_Bool’ in declaration specifiers > cc1: warnings being treated as errors > include/linux/types.h:29: error: useless type name in empty declaration Not sure what's up here, did you try with a more recent compiler ? 4.3 is pretty ancient by kernel standards. You can find cross compilers there: https://www.kernel.org/pub/tools/crosstool/ They aren't the newest either but they should work. Ben. > > make ARCH=powerpc CROSS_COMPILE=powerpc64-4.3.2- arch/powerpc/kernel/ drivers/pci/ > > worked just fine. > > Regards, > Sebastian > > > > > > --- > > > arch/microblaze/pci/pci-common.c | 20 -------------------- > > > arch/powerpc/kernel/pci-common.c | 20 -------------------- > > > drivers/pci/pci-sysfs.c | 17 +++++++++++++++++ > > > 3 files changed, 17 insertions(+), 40 deletions(-) > > > > > > --- a/arch/microblaze/pci/pci-common.c > > > +++ b/arch/microblaze/pci/pci-common.c > > > @@ -168,26 +168,6 @@ struct pci_controller *pci_find_hose_for > > > return NULL; > > > } > > > > > > -static ssize_t pci_show_devspec(struct device *dev, > > > - struct device_attribute *attr, char *buf) > > > -{ > > > - struct pci_dev *pdev; > > > - struct device_node *np; > > > - > > > - pdev = to_pci_dev(dev); > > > - np = pci_device_to_OF_node(pdev); > > > - if (np == NULL || np->full_name == NULL) > > > - return 0; > > > - return sprintf(buf, "%s", np->full_name); > > > -} > > > -static DEVICE_ATTR(devspec, S_IRUGO, pci_show_devspec, NULL); > > > - > > > -/* Add sysfs properties */ > > > -int pcibios_add_platform_entries(struct pci_dev *pdev) > > > -{ > > > - return device_create_file(&pdev->dev, &dev_attr_devspec); > > > -} > > > - > > > void pcibios_set_master(struct pci_dev *dev) > > > { > > > /* No special bus mastering setup handling */ > > > --- a/arch/powerpc/kernel/pci-common.c > > > +++ b/arch/powerpc/kernel/pci-common.c > > > @@ -201,26 +201,6 @@ struct pci_controller* pci_find_hose_for > > > return NULL; > > > } > > > > > > -static ssize_t pci_show_devspec(struct device *dev, > > > - struct device_attribute *attr, char *buf) > > > -{ > > > - struct pci_dev *pdev; > > > - struct device_node *np; > > > - > > > - pdev = to_pci_dev (dev); > > > - np = pci_device_to_OF_node(pdev); > > > - if (np == NULL || np->full_name == NULL) > > > - return 0; > > > - return sprintf(buf, "%s", np->full_name); > > > -} > > > -static DEVICE_ATTR(devspec, S_IRUGO, pci_show_devspec, NULL); > > > - > > > -/* Add sysfs properties */ > > > -int pcibios_add_platform_entries(struct pci_dev *pdev) > > > -{ > > > - return device_create_file(&pdev->dev, &dev_attr_devspec); > > > -} > > > - > > > /* > > > * Reads the interrupt pin to determine if interrupt is use by card. > > > * If the interrupt is used, then gets the interrupt line from the > > > --- a/drivers/pci/pci-sysfs.c > > > +++ b/drivers/pci/pci-sysfs.c > > > @@ -416,6 +416,20 @@ static ssize_t d3cold_allowed_show(struc > > > static DEVICE_ATTR_RW(d3cold_allowed); > > > #endif > > > > > > +#ifdef CONFIG_OF > > > +static ssize_t devspec_show(struct device *dev, > > > + struct device_attribute *attr, char *buf) > > > +{ > > > + struct pci_dev *pdev = to_pci_dev(dev); > > > + struct device_node *np = pci_device_to_OF_node(pdev); > > > + > > > + if (np == NULL || np->full_name == NULL) > > > + return 0; > > > + return sprintf(buf, "%s", np->full_name); > > > +} > > > +static DEVICE_ATTR_RO(devspec); > > > +#endif > > > + > > > #ifdef CONFIG_PCI_IOV > > > static ssize_t sriov_totalvfs_show(struct device *dev, > > > struct device_attribute *attr, > > > @@ -521,6 +535,9 @@ static struct attribute *pci_dev_attrs[] > > > #if defined(CONFIG_PM_RUNTIME) && defined(CONFIG_ACPI) > > > &dev_attr_d3cold_allowed.attr, > > > #endif > > > +#ifdef CONFIG_OF > > > + &dev_attr_devspec.attr, > > > +#endif > > > NULL, > > > }; > > > > > > > > > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
