From: Pratyush Anand <pratyush.anand@xxxxxx> SPEAr1310/40 uses miphy for PCIe, SATA. This patch adds documentation for the binding on the top of generic phy bindings. Signed-off-by: Pratyush Anand <pratyush.anand@xxxxxx> Acked-by: Arnd Bergmann <arnd@xxxxxxxx> Cc: Mohit Kumar <mohit.kumar@xxxxxx> Cc: Viresh Kumar <viresh.linux@xxxxxxxxx> Cc: Kishon Vijay Abraham I <kishon@xxxxxx> Cc: spear-devel@xxxxxxxxxxx Cc: devicetree@xxxxxxxxxxxxxxx --- .../devicetree/bindings/phy/st-spear1310-miphy.txt | 12 ++++++++++++ .../devicetree/bindings/phy/st-spear1340-miphy.txt | 11 +++++++++++ 2 files changed, 23 insertions(+), 0 deletions(-) create mode 100644 Documentation/devicetree/bindings/phy/st-spear1310-miphy.txt create mode 100644 Documentation/devicetree/bindings/phy/st-spear1340-miphy.txt diff --git a/Documentation/devicetree/bindings/phy/st-spear1310-miphy.txt b/Documentation/devicetree/bindings/phy/st-spear1310-miphy.txt new file mode 100644 index 0000000..b9b281a --- /dev/null +++ b/Documentation/devicetree/bindings/phy/st-spear1310-miphy.txt @@ -0,0 +1,12 @@ +ST SPEAr1310-miphy DT detail +=================================== + +SPEAr1310-miphy is a phy controller supporting PCIe and SATA. + +Required properties: +- compatible : should be "st,spear1310-miphy" +- reg : offset and length of the PHY register set. +- misc: phandle for the syscon node to access misc registers +- phy-id: Instance id of the phy. +- #phy-cells : from the generic PHY bindings, must be 1. + - cell[1]: 0 if phy used for SATA, 1 for PCIe. diff --git a/Documentation/devicetree/bindings/phy/st-spear1340-miphy.txt b/Documentation/devicetree/bindings/phy/st-spear1340-miphy.txt new file mode 100644 index 0000000..7eb5335 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/st-spear1340-miphy.txt @@ -0,0 +1,11 @@ +ST SPEAr1340-miphy DT detail +=================================== + +SPEAr1340-miphy is a phy controller supporting PCIe and SATA. + +Required properties: +- compatible : should be "st,spear1340-miphy" +- reg : offset and length of the PHY register set. +- misc: phandle for the syscon node to access misc registers +- #phy-cells : from the generic PHY bindings, must be 1. + - cell[1]: 0 if phy used for SATA, 1 for PCIe. -- 1.7.0.1 -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
