Hi Lucas/Tanmay, On Thu, Mar 6, 2014 at 11:09 PM, Lucas Stach <l.stach@xxxxxxxxxxxxxx> wrote: > Am Donnerstag, den 06.03.2014, 10:36 -0700 schrieb Stephen Warren: >> On 03/05/2014 06:25 AM, Lucas Stach wrote: >> > This is the recommended method of doing the IRQ >> > mapping. For old devicetrees we fall back to the >> > previous practice. >> >> Tested-by: Stephen Warren <swarren@xxxxxxxxxx> >> >> I tested both with and without patch 1/6, and the PCIe-based NIC on >> Beaver worked fine either way. Without patch 1/6, I do see: >> >> pci 0000:00:01.0: of_irq_parse_pci() failed with rc=-22 >> >> ... but that seems reasonable given that the DT that of_irq_parse_pci() >> parses is missing, and did correctly trigger the fallback path, so >> everything still worked. > > Yes, this should be normal. It spits this error for old DTs, but keeps > doing the right thing. I'm not sure if we should downgrade this to info > or dbg. I see this error too on my setup (Xilinx PCIe Root Complex Driver), https://lkml.org/lkml/2014/3/3/183 After digging into it, I see I need to override the API pcibios_get_phb_of_node() to pass my device node. Is this the only possible way? >From the discussion in this thread, I feel am missing something in the dt node. Below is my dt node, please let me know if you see any issues. +++++++++++++++++++++++ pcie{ reg = <XXXX>; ranges = <YYYY>; interrupts = <0 52 4>; pcie_intc: interrupt-controller { interrupt-controller; #address-cells = <0>; #interrupt-cells = <1>; } interrupt-map-mask = <0 0 0 7>; interrupt-map = <0 0 0 1 &pcie_intc 1>, <0 0 0 2 &pcie_intc 2>, <0 0 0 3 &pcie_intc 3>, <0 0 0 4 &pcie_intc 4>; }; Thanks in advance, Srikanth. > > Regards, > Lucas > -- > Pengutronix e.K. | Lucas Stach | > Industrial Linux Solutions | http://www.pengutronix.de/ | > Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-5076 | > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | > > -- > To unsubscribe from this list: send the line "unsubscribe linux-pci" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html