Add utility methods tb_port_state and tb_wait_for_port. Add
tb_scan_switch which recursively checks for downstream switches.
Signed-off-by: Andreas Noever <andreas.noever@xxxxxxxxx>
---
drivers/thunderbolt/switch.c | 97 ++++++++++++++++++++++++++++++++++++++++++++
drivers/thunderbolt/tb.c | 44 ++++++++++++++++++++
drivers/thunderbolt/tb.h | 16 ++++++++
3 files changed, 157 insertions(+)
diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c
index 21457cc..279b9c5 100644
--- a/drivers/thunderbolt/switch.c
+++ b/drivers/thunderbolt/switch.c
@@ -53,6 +53,92 @@ static void tb_dump_port(struct tb *tb, struct tb_regs_port_header *port)
}
/**
+ * tb_port_state() - get connectedness state of a port
+ *
+ * The port must have a TB_CAP_PHY (i.e. it should be a real port).
+ *
+ * Return: Returns an enum tb_port_state on success or an error code on failure.
+ */
+static int tb_port_state(struct tb_port *port)
+{
+ struct tb_cap_phy phy;
+ int res;
+ if (port->cap_phy == 0) {
+ tb_port_WARN(port, "does not have a PHY\n");
+ return -EINVAL;
+ }
+ res = tb_port_read(port, &phy, TB_CFG_PORT, port->cap_phy, 2);
+ if (res)
+ return res;
+ return phy.state;
+}
+
+/**
+ * tb_wait_for_port() - wait for a port to become ready
+ *
+ * Wait up to 1 second for a port to reach state TB_PORT_UP. If
+ * wait_if_unplugged is set then we also wait if the port is in state
+ * TB_PORT_UNPLUGGED (it takes a while for the device to be registered after
+ * switch resume). Otherwise we only wait if a device is registered but the link
+ * has not yet been established.
+ *
+ * Return: Returns an error code on failure. Returns 0 if the port is not
+ * connected or failed to reach state TB_PORT_UP within one second. Returns 1
+ * if the port is connected and in state TB_PORT_UP.
+ */
+int tb_wait_for_port(struct tb_port *port, bool wait_if_unplugged)
+{
+ int retries = 10;
+ int state;
+ if (!port->cap_phy) {
+ tb_port_WARN(port, "does not have PHY\n");
+ return -EINVAL;
+ }
+ if (tb_is_upstream_port(port)) {
+ tb_port_WARN(port, "is the upstream port\n");
+ return -EINVAL;
+ }
+
+ while (retries--) {
+ state = tb_port_state(port);
+ if (state < 0)
+ return state;
+ if (state == TB_PORT_DISABLED) {
+ tb_port_info(port, "is disabled (state: 0)\n");
+ return 0;
+ }
+ if (state == TB_PORT_UNPLUGGED) {
+ if (wait_if_unplugged) {
+ /* used during resume */
+ tb_port_info(port,
+ "is unplugged (state: 7), retrying...\n");
+ msleep(100);
+ continue;
+ }
+ tb_port_info(port, "is unplugged (state: 7)\n");
+ return 0;
+ }
+ if (state == TB_PORT_UP) {
+ tb_port_info(port,
+ "is connected, link is up (state: 2)\n");
+ return 1;
+ }
+
+ /*
+ * After plug-in the state is TB_PORT_CONNECTING. Give it some
+ * time.
+ */
+ tb_port_info(port,
+ "is connected, link is not up (state: %d), retrying...\n",
+ state);
+ msleep(100);
+ }
+ tb_port_warn(port,
+ "failed to reach state TB_PORT_UP. Ignoring port...\n");
+ return 0;
+}
+
+/**
* tb_init_port() - initialize a port
*
* This is a helper method for tb_switch_alloc. Does not check or initialize
@@ -63,6 +149,7 @@ static void tb_dump_port(struct tb *tb, struct tb_regs_port_header *port)
static int tb_init_port(struct tb_switch *sw, u8 port_nr)
{
int res;
+ int cap;
struct tb_port *port = &sw->ports[port_nr];
port->sw = sw;
port->port = port_nr;
@@ -71,6 +158,16 @@ static int tb_init_port(struct tb_switch *sw, u8 port_nr)
if (res)
return res;
+ /* Port 0 is the switch itself and has no PHY. */
+ if (port->config.type == TB_TYPE_PORT && port_nr != 0) {
+ cap = tb_find_cap(port, TB_CFG_PORT, TB_CAP_PHY);
+
+ if (cap > 0)
+ port->cap_phy = cap;
+ else
+ tb_port_WARN(port, "non switch port without a PHY\n");
+ }
+
tb_dump_port(sw->tb, &port->config);
/* TODO: Read dual link port, DP port and more from EEPROM. */
diff --git a/drivers/thunderbolt/tb.c b/drivers/thunderbolt/tb.c
index f1b6100..3b716fd 100644
--- a/drivers/thunderbolt/tb.c
+++ b/drivers/thunderbolt/tb.c
@@ -11,6 +11,47 @@
#include "tb.h"
#include "tb_regs.h"
+
+/* enumeration & hot plug handling */
+
+
+static void tb_scan_port(struct tb_port *port);
+
+/**
+ * tb_scan_switch() - scan for and initialize downstream switches
+ */
+static void tb_scan_switch(struct tb_switch *sw)
+{
+ int i;
+ for (i = 1; i <= sw->config.max_port_number; i++)
+ tb_scan_port(&sw->ports[i]);
+}
+
+/**
+ * tb_scan_port() - check for and initialize switches below port
+ */
+static void tb_scan_port(struct tb_port *port)
+{
+ struct tb_switch *sw;
+ if (tb_is_upstream_port(port))
+ return;
+ if (port->config.type != TB_TYPE_PORT)
+ return;
+ if (tb_wait_for_port(port, false) <= 0)
+ return;
+ if (port->remote) {
+ tb_port_WARN(port, "port already has a remote!\n");
+ return;
+ }
+ sw = tb_switch_alloc(port->sw->tb, tb_downstream_route(port));
+ if (!sw)
+ return;
+ port->remote = tb_upstream_port(sw);
+ tb_upstream_port(sw)->remote = port;
+ tb_scan_switch(sw);
+}
+
+
/* hotplug handling */
struct tb_hotplug_event {
@@ -134,6 +175,9 @@ struct tb *thunderbolt_alloc_and_start(struct tb_nhi *nhi)
if (!tb->root_switch)
goto err_locked;
+ /* Full scan to discover devices added before the driver was loaded. */
+ tb_scan_switch(tb->root_switch);
+
/* Allow tb_handle_hotplug to progress events */
tb->hotplug_active = true;
mutex_unlock(&tb->lock);
diff --git a/drivers/thunderbolt/tb.h b/drivers/thunderbolt/tb.h
index feb6c7a..7e7b3fe 100644
--- a/drivers/thunderbolt/tb.h
+++ b/drivers/thunderbolt/tb.h
@@ -29,6 +29,7 @@ struct tb_port {
struct tb_regs_port_header config;
struct tb_switch *sw;
struct tb_port *remote; /* remote port, NULL if not connected */
+ int cap_phy; /* offset, zero if not found */
u8 port; /* port number on switch */
};
@@ -160,6 +161,8 @@ void thunderbolt_shutdown_and_free(struct tb *tb);
struct tb_switch *tb_switch_alloc(struct tb *tb, u64 route);
void tb_switch_free(struct tb_switch *sw);
+int tb_wait_for_port(struct tb_port *port, bool wait_if_unplugged);
+
int tb_find_cap(struct tb_port *port, enum tb_cfg_space space, u32 value);
@@ -173,4 +176,17 @@ static inline bool tb_is_upstream_port(struct tb_port *port)
return port == tb_upstream_port(port->sw);
}
+/**
+ * tb_downstream_route() - get route to downstream switch
+ *
+ * Port must not be the upstream port (otherwise a loop is created).
+ *
+ * Return: Returns a route to the switch behind @port.
+ */
+static inline u64 tb_downstream_route(struct tb_port *port)
+{
+ return tb_route(port->sw)
+ | ((u64) port->port << (port->sw->config.depth * 8));
+}
+
#endif
--
1.9.2
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
