On Wed, 2014-04-09 at 16:50 -0700, James Bottomley wrote: > On Wed, 2014-04-09 at 16:40 -0700, Davidlohr Bueso wrote: > > On Wed, 2014-04-09 at 16:10 -0700, James Bottomley wrote: > > > On Wed, 2014-04-09 at 16:08 -0700, James Bottomley wrote: > > > > [+linux-scsi] > > > > On Wed, 2014-04-09 at 15:49 -0700, Davidlohr Bueso wrote: > > > > > On Wed, 2014-04-09 at 10:39 +0800, Baoquan He wrote: > > > > > > Hi, > > > > > > > > > > > > The kernel is 3.14.0+ which is pulled just now. > > > > > > > > > > Cc'ing more people. > > > > > > > > > > While the hpsa driver appears to be involved in some way, I'm sure if > > > > > this is a related issue, but as of today's pull I'm getting another > > > > > problem that causes my DL980 not to come up. > > > > > > > > > > *Massive* amounts of: > > > > > > > > > > DMAR:[fault reason 02] Present bit in context entry is clear > > > > > dmar: DRHD: handling fault status reg 602 > > > > > dmar: DMAR:[DMA Read] Request device [02:00.0] fault addr 7f61e000 > > > > > > > > > > Then: > > > > > > > > > > hpsa 0000:03:00.0: Controller lockup detected: 0xffff0000 > > > > > ... > > > > > Workqueue: events hpsa_monitor_ctlr_worker [hpsa] > > > > > ... > > > > > > > > > > Screenshot of the actual LOCKUP: > > > > > http://stgolabs.net/hpsa-hard-lockup-3.14+.png > > > > > > > > > > While I haven't bisected, things worked fine until at least until commit > > > > > 39de65aa2c3e (April 2nd). > > > > > > > > > > Any ideas? > > > > > > > > Well, it's either a DMA remapping issue or a hpsa one. Your assertion > > > > that everything worked fine until 39de65aa2c3e would tend to vindicate > > > > hpsa, > > > > Hmm here you mean DMA, right? > > No, it vindicates the hpsa changes ... they don't seem to be causing > problems until something goes wrong with dma remapping. > > > > because all the hpsa changes went in before that under > > > Missing crucial info: > > > > > > commit 1a0b6abaea78f73d9bc0a2f6df2d9e4c917cade1 > > > > > > > Merge: 3e75c6d b2bff6c > > > > Author: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx> > > > > Date: Tue Apr 1 18:49:04 2014 -0700 > > > > > > > > Merge tag 'scsi-misc' of > > > > git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi > > > > > > > > can you revalidate that this commit works OK just to make sure? > > > > Ok so I don't see those DMA messages and system starts just fine. I'm > > thinking perhaps something broke after the IO mmu stuff in commit > > 3f583bc21977a608908b83d03ee2250426a5695c... could this be indirectly > > causing the CPU stalls and just blame hpsa in the path as a side effect? > > > > /me goes out to try the commit. > > That's my guess. The DMAR messages are DMA remapping issues caused in > the IOMMU. If I had to guess, I'd say the DMAR fault message is > indicating the IOMMU is calling for a mapping address before it can > satisfy the driver read request, which is causing the hang apparently in > the hpsa driver. > > I've added linux-pci to the cc; I think they deal with iommu issues on > x86. So that merge commit appears to be the culprit, I see both the DMA messages and the lockup blaming hpsa... -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
