On 04/04/2014 08:49 AM, Thierry Reding wrote: > The current usage of regulators for the Tegra PCIe block is wrong. It > doesn't accurately reflect the actual supply inputs of the IP block and > therefore isn't as flexible as it should be. Rectify this by describing > all possible supply inputs in the device tree binding documentation and > deprecate the old supply properties. > diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt > +Power supplies for Tegra30: ... > +- Optional: > + - If port 0 is enabled: > + - avdd-pexa-supply: Power supply for analog PCIe logic. Must supply 1.05 V. > + - vdd-pexa-supply: Power supply for digital PCIe I/O. Must supply 1.05 V. > + - If at least one of ports 1 and 2 is enabled: > + - avdd-pexb-supply: Power supply for analog PCIe logic. Must supply 1.05 V. > + - vdd-pexb-supply: Power supply for digital PCIe I/O. Must supply 1.05 V. Did you get confirmation from HW/... that the mapping from pexa/b to PCIe ports you document above is correct? IIRC the two supplies might be related to lanes rather than ports? -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
