Am Montag, den 31.03.2014, 11:30 +0100 schrieb Phil Edworthy:
> This patch adds the bindings for the R-Car PCIe driver. The driver
> resides under drivers/pci/host/pcie-rcar.c
>
> Signed-off-by: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
Another nitpick below, otherwise:
Reviewed-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
If you decide to roll another version with just this changed, feel free
to carry over the my tag.
>
> v7:
> - Change binding description of clocks to 'clock specifiers'
>
> v6:
> - Correct DT bindings description for reg and clocks
>
> v5:
> - Add PCIe bus clock reference
> - Add additional interrupt bindings
> - Use dma-ranges property to specify inbound memory regions
> ---
> Documentation/devicetree/bindings/pci/rcar-pci.txt | 45 ++++++++++++++++++++++
> 1 file changed, 45 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pci/rcar-pci.txt
>
> diff --git a/Documentation/devicetree/bindings/pci/rcar-pci.txt b/Documentation/devicetree/bindings/pci/rcar-pci.txt
> new file mode 100644
> index 0000000..789bd46
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/rcar-pci.txt
> @@ -0,0 +1,45 @@
> +* Renesas RCar PCIe interface
> +
> +Required properties:
> +- compatible: should contain one of the following
> + "renesas,pcie-r8a7779", "renesas,pcie-r8a7790", "renesas,pcie-r8a7791"
> +- reg: base address and length of the pcie controller registers.
> +- #address-cells: set to <3>
> +- #size-cells: set to <2>
> +- device_type: set to "pci"
> +- ranges: ranges for the PCI memory and I/O regions.
> +- dma-ranges: ranges for the inbound memory regions.
> +- interrupts: two interrupt sources for MSI interrupts, followed by interrupt
> + source for hardware related interrupts (e.g. link speed change).
> +- #interrupt-cells: set to <1>
> +- interrupt-map-mask and interrupt-map: standard PCI properties
> + to define the mapping of the PCIe interface to interrupt
> + numbers.
> +- clocks: from common clock binding: clock specifiers for the PCIe controller
> + and PCIe bus clocks.
> +- clock-names: from common clock binding: should be "pcie" and "pcie_bus".
> +
> +Example:
> +
> +SoC specific DT Entry:
> +
> + pcie: pcie@fe000000 {
> + compatible = "renesas,pcie-r8a7791";
> + reg = <0 0xfe000000 0 0x80000>;
> + #address-cells = <3>;
> + #size-cells = <2>;
> + device_type = "pci";
> + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
> + 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
> + 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
> + 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
> + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000
> + 0x42000000 2 0x00000000 2 0x00000000 0 0x40000000>;
> + interrupts = <0 116 4 0 117 4 0 118 4>;
I think this is confusing, I would rather like to see them in separate
cells, like
interrupts = <0 116 4>, <0 117 4>, <0 118 4>;
Same would be true for the ranges properties, but there it isn't as
confusing, so I don't really care.
> + #interrupt-cells = <1>;
> + interrupt-map-mask = <0 0 0 0>;
> + interrupt-map = <0 0 0 0 &gic 0 116 4>;
> + clocks = <&mstp3_clks R8A7791_CLK_PCIE>, <&pcie_bus_clk>;
> + clock-names = "pcie", "pcie_bus";
> + status = "disabled";
> + };
--
Pengutronix e.K. | Lucas Stach |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-5076 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
