Re: [PATCH 1/9] pci-rcar-gen2: add devicetree support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 03/06/2014 09:01 PM, Ben Dooks wrote:

Add OF match table for pci-rcar-gen2 driver for device tree support.

Signed-off-by: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
---
Updates since v1:
	- moved documentation into patch
	- moved to using bus-range parsing
	- ensured usb phy can be linked to usb devices

Cc: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
Cc: Simon Horman <horms@xxxxxxxxxxxx>
Cc: linux-pci@xxxxxxxxxxxxxxx
Cc: linux-sh@xxxxxxxxxxxxxxx
Cc: devicetree@xxxxxxxxxxxxxxx
---
  .../bindings/pci/renessas,pci-rcar-gen2.txt        | 52 ++++++++++++++++++++++
  drivers/pci/host/pci-rcar-gen2.c                   | 33 +++++++++++++-
  2 files changed, 83 insertions(+), 2 deletions(-)
  create mode 100644 Documentation/devicetree/bindings/pci/renessas,pci-rcar-gen2.txt

diff --git a/Documentation/devicetree/bindings/pci/renessas,pci-rcar-gen2.txt b/Documentation/devicetree/bindings/pci/renessas,pci-rcar-gen2.txt
new file mode 100644
index 0000000..bd6d291
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/renessas,pci-rcar-gen2.txt
@@ -0,0 +1,52 @@
+Renesas AHB to PCI bridge
+-------------------------

   Perhaps it makes sense to describe PCIe bindings in the same file...

[...]

+Example SoC configuration:
+
+	pci0: pci@ee090000  {
+		compatible = "renesas,pci-r8a7790";
+		clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
+		reg = <0x0 0xee090000 0x0 0xc00>,
+		      <0x0 0xee080000 0x0 0x1100>;
+		interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+
+		bus-range = <0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+	};
+
+Example board setup:
+
+&pci1 {
+	status = "okay";
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+
+	pci@0,1 {
+		reg = <0x800 0 0 0 0>;
+		device_type = "pci";
+		usb-phy = <&usbphy>;
+	};
+
+	pci@0,2 {
+		reg = <0x1000 0 0 0 0>;
+		device_type = "pci";
+		usb-phy = <&usbphy>;
+	};
+};

   As I said, these PCI sub-nodes belong to the SoC file.

diff --git a/drivers/pci/host/pci-rcar-gen2.c b/drivers/pci/host/pci-rcar-gen2.c
index fd3e3ab..1216784 100644
--- a/drivers/pci/host/pci-rcar-gen2.c
+++ b/drivers/pci/host/pci-rcar-gen2.c
[...]
@@ -377,11 +396,21 @@ static int rcar_pci_probe(struct platform_device *pdev)
  	return 0;
  }

+#ifdef CONFIG_OF

   I don't think it's really worth it.

+static struct of_device_id rcar_pci_of_match[] = {
+	{ .compatible = "renesas,pci-r8a7790", },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(of, rcar_pci_of_match);
+#endif
+
  static struct platform_driver rcar_pci_driver = {
  	.driver = {
  		.name = "pci-rcar-gen2",
  		.owner = THIS_MODULE,
  		.suppress_bind_attrs = true,
+		.of_match_table = of_match_ptr(rcar_pci_of_match),

   And so, of_match_ptr() is not needed.

WBR, Sergei

--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux