Hi Lucas,
On 21/03/2014 11:24, Lucas wrote:
> Subject: Re: [PATCH v4 5/9] dt-bindings: pci: rcar pcie device tree
bindings
>
> Am Freitag, den 21.03.2014, 10:32 +0000 schrieb Phil Edworthy:
> > This patch adds the bindings for the rcar PCIE driver. The driver
> > resides under drivers/pci/host/pcie-rcar.c
> >
> > Signed-off-by: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
>
> I have one question below. If you can answer this with yes after
> thinking again about it, this is:
>
> Reviewed-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
> > ---
> > Documentation/devicetree/bindings/pci/rcar-pci.txt | 40
++++++++++++++++++++++
> > 1 file changed, 40 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/pci/rcar-pci.txt
> >
> > diff --git a/Documentation/devicetree/bindings/pci/rcar-pci.txt b/
> Documentation/devicetree/bindings/pci/rcar-pci.txt
> > new file mode 100644
> > index 0000000..0e219b0
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pci/rcar-pci.txt
> > @@ -0,0 +1,40 @@
> > +* Renesas RCar PCIe interface
> > +
> > +Required properties:
> > +- compatible: should contain one of the following
> > + "renesas,r8a7779-pcie", "renesas,r8a7790-pcie",
"renesas,r8a7791-pcie"
> > +- reg: base addresses and lengths of the pcie controller.
> > +- #address-cells: set to <3>
> > +- #size-cells: set to <2>
> > +- device_type: set to "pci"
> > +- ranges: ranges for the PCI memory and I/O regions
> > +- interrupts: interrupt values for MSI interrupt
> > +- #interrupt-cells: set to <1>
> > +- interrupt-map-mask and interrupt-map: standard PCI properties
> > + to define the mapping of the PCIe interface to interrupt
> > + numbers.
> > +- clocks: from common clock binding: handle to pci clock.
> > +- clock-names: from common clock binding: should be "pcie"
>
> You really only have one PCIe clock? So the controller is generating the
> PCIe bus clock from it's register clock? No need to enable any other
> clock for PCIe to work?
Yes, just the one clock. The PCIe bus clock is an external clock dedicated
to PCIe and SATA, and we have no control over it.
> > +
> > +Example:
> > +
> > +SoC specific DT Entry:
> > +
> > + pcie: pcie@0x01000000 {
> > + compatible = "renesas,r8a7790-pcie";
> > + reg = <0 0xfe000000 0 0x80000>;
> > + #address-cells = <3>;
> > + #size-cells = <2>;
> > + device_type = "pci";
> > + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
> > + 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
> > + 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
> > + 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
> > + interrupts = <0 116 4>;
> > + #interrupt-cells = <1>;
> > + interrupt-map-mask = <0 0 0 0>;
> > + interrupt-map = <0 0 0 0 &gic 0 116 4>;
> > + clocks = <&mstp3_clks R8A7790_CLK_PCIE>;
> > + clock-names = "pcie";
> > + status = "disabled";
> > + };
>
> --
> Pengutronix e.K. | Lucas Stach |
> Industrial Linux Solutions | http://www.pengutronix.de/
|
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-5076
|
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555
|
>
Thanks
Phil
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
