Hello Jingoo, > -----Original Message----- > From: Jingoo Han [mailto:jg1.han@xxxxxxxxxxx] > Sent: Friday, March 14, 2014 11:32 AM > To: Mohit KUMAR DCG > Cc: arnd@xxxxxxxx; Pratyush ANAND; 'Viresh Kumar'; spear-devel; linux- > pci@xxxxxxxxxxxxxxx; 'Jingoo Han' > Subject: Re: [PATCH V7 08/10] pcie: SPEAr13xx: Add designware wrapper > support > > On Friday, February 28, 2014 8:55 PM, Mohit Kumar wrote: > > > > From: Pratyush Anand <pratyush.anand@xxxxxx> > > > > SPEAr1310 and SPEAr1340 SOC uses designware PCIe controller. Add > > SPEAr13xx PCIe driver based on designware controller driver. > > > > SPEAr1310 has 3 PCIe ports and SPEAr1340 has 1, which are multiplexed > > with ahci/sata pins. By default evaluation board of both controller > > works for ahci mode. > > To use these patches on SPEAr1340/1310 evaluation board, do the > > necessary modifications on board and enable (okay) pcie and miphy from > > respective evb dtsi file. > > > > Signed-off-by: Pratyush Anand <pratyush.anand@xxxxxx> > > Signed-off-by: Mohit Kumar <mohit.kumar@xxxxxx> > > Cc: Jingoo Han <jg1.han@xxxxxxxxxxx> > > For 'drivers/pci/host/pcie-spear13xx.c', > > Reviewed-by: Jingoo Han <jg1.han@xxxxxxxxxxx> - Thanks for the review.. Regards Mohit > > Best regards, > Jingoo Han > > > Cc: Arnd Bergmann <arnd@xxxxxxxx> > > Cc: Viresh Kumar <viresh.linux@xxxxxxxxx> > > Cc: spear-devel@xxxxxxxxxxx > > Cc: linux-pci@xxxxxxxxxxxxxxx > > --- > > arch/arm/boot/dts/spear1310.dtsi | 6 + > > arch/arm/boot/dts/spear1340.dtsi | 2 + > > arch/arm/boot/dts/spear13xx.dtsi | 4 +- > > arch/arm/mach-spear/Kconfig | 1 + > > drivers/pci/host/Kconfig | 8 + > > drivers/pci/host/Makefile | 1 + > > drivers/pci/host/pcie-spear13xx.c | 414 > > +++++++++++++++++++++++++++++++++++++ > > 7 files changed, 434 insertions(+), 2 deletions(-) create mode > > 100644 drivers/pci/host/pcie-spear13xx.c > ��.n��������+%������w��{.n�����{���"�)�� jg��� �����ݢj����G���� ���j:+v���w�m������w�������h�����٥
