On Tue, 2014-03-11 at 19:11 +0530, Jagan Teki wrote: > Just add one more point here, Read DMA Status Register(0x4804) value here > was 0x10 which means Read DMA PCI Parity Error, can anyone send what are > the possible cases to trigger this error.! A parity error is detected during read DMA (from root complex to tg3 device). You can also check the AER capability in config space which has more information about correctable and uncorrectable errors. I think it means that your PCIE link is not very stable if you get these errors repeatedly. -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html