On Mon, Mar 03, 2014 at 03:14:47PM -0800, Tanmay Inamdar wrote:
> Hello Liviu,
>
> Thanks for fixing up domain_nr. Now I have moved on further to a new
> domain_nr related warning dump :-)
>
> -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
> xgene-pcie 1f500000.pcie: (rc) x8 gen-3 link up
> pci_bus 0001:00: scanning bus
> pci_setup_device:1101 domain_nr = 1
> pci 0001:00:00.0: [e008:e004] type 01 class 0x060400
> pci 0001:00:00.0: reg 0x10: [mem 0x4000000000-0x7fffffffff 64bit]
> pci 0001:00:00.0: calling xgene_pcie_fixup_bridge+0x0/0x80
> pci 0001:00:00.0: Hiding X-Gene pci host bridge resources 0001:00:00.0
> pci 0001:00:00.0: supports D1 D2
> pci_bus 0001:00: fixups for bus
> pci 0001:00:00.0: scanning [bus 03-03] behind bridge, pass 0
> pci 0001:00:00.0: bridge configuration invalid ([bus 03-03]), reconfiguring
> pci 0001:00:00.0: scanning [bus 00-00] behind bridge, pass 1
> ** pci_scan_bridge:855 pci_domain_nr(bus) = 1
> ** pci_alloc_child_bus:681 pci_domain_nr(bus) = 1
> pci_bus 0001:01: scanning bus
> pci_setup_device:1101 domain_nr = 0
Why does the domain_nr change here?
> pci 0000:01:00.0: [15b3:1003] type 00 class 0x020000
> pci 0000:01:00.0: reg 0x10: [mem 0x00100000-0x001fffff 64bit]
> pci 0000:01:00.0: reg 0x18: [mem 0x00800000-0x00ffffff 64bit pref]
> pci 0000:01:00.0: reg 0x30: [mem 0x01000000-0x010fffff pref]
> ------------[ cut here ]------------
> WARNING: CPU: 0 PID: 1 at
> /home/tinamdar/work/open-source/linux/fs/sysfs/dir.c:52
> sysfs_warn_dup+0x80/0xc0()
> sysfs: cannot create duplicate filename '/bus/pci/devices/0000:01:00.0'
> Modules linked in:
> CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc5+ #40
> Call trace:
> [<ffffffc000088180>] dump_backtrace+0x0/0x140
> [<ffffffc0000882d0>] show_stack+0x10/0x20
> [<ffffffc0004f65ac>] dump_stack+0x74/0xc4
> [<ffffffc000096e04>] warn_slowpath_common+0x84/0xc0
> [<ffffffc000096e8c>] warn_slowpath_fmt+0x4c/0x60
> [<ffffffc0001b83dc>] sysfs_warn_dup+0x7c/0xc0
> [<ffffffc0001b8894>] sysfs_do_create_link_sd.isra.2+0xf4/0x100
> [<ffffffc0001b88bc>] sysfs_create_link+0x1c/0x40
> [<ffffffc0003250b0>] bus_add_device+0x110/0x1c0
> [<ffffffc000322f1c>] device_add+0x31c/0x520
> [<ffffffc0002c444c>] pci_device_add+0xec/0x140
> [<ffffffc0004f1758>] pci_scan_single_device+0x98/0xe0
> [<ffffffc0002c44e8>] pci_scan_slot+0x48/0x120
> [<ffffffc0002c5368>] pci_scan_child_bus+0x48/0x140
> [<ffffffc0002c522c>] pci_scan_bridge+0x4ec/0x5e0
> [<ffffffc0002c53c8>] pci_scan_child_bus+0xa8/0x140
> [<ffffffc0004f1b30>] pci_rescan_bus+0x10/0x40
> [<ffffffc0006a12ac>] xgene_pcie_probe_bridge+0x660/0x72c
> [<ffffffc000327d20>] platform_drv_probe+0x20/0x60
> [<ffffffc000325e30>] really_probe+0xf0/0x220
> [<ffffffc000326080>] __driver_attach+0xa0/0xc0
> [<ffffffc000323ed4>] bus_for_each_dev+0x54/0xa0
> [<ffffffc0003258bc>] driver_attach+0x1c/0x40
> [<ffffffc00032548c>] bus_add_driver+0x14c/0x220
> [<ffffffc00032683c>] driver_register+0x5c/0x120
> [<ffffffc000327cdc>] __platform_driver_register+0x5c/0x80
> [<ffffffc0006a0c40>] xgene_pcie_driver_init+0x14/0x20
> [<ffffffc0000814c0>] do_one_initcall+0xe0/0x160
> [<ffffffc00068c934>] kernel_init_freeable+0x134/0x1d8
> [<ffffffc0004f07ac>] kernel_init+0xc/0xe0
> ---[ end trace 3ee052d463aab7f3 ]---
> ------------[ cut here ]------------
> WARNING: CPU: 0 PID: 1 at
> /home/tinamdar/work/open-source/linux/drivers/pci/probe.c:1380
> pci_device_add+0x128/0x140()
> -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
>
> I have made a small fix above your patch. After the fix is applied,
> dumps are gone and the enumeration finishes up smoothly for all the
> ports.
> Since the change is small, just pasting it here. Please review and
> apply if it's clean.
Honestly, I have no idea. I kept staring at the code for a better part of an hour
trying to decipher what the intent of the code was, without too much progress. I
still don't understand why the code in pci_alloc_child_bus() takes a shortcut when
the bridge argument is NULL when in my opinion it should use parent->bridge instead
and continue as normal.
>
> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> index a12cda5..aac8366 100644
> --- a/drivers/pci/probe.c
> +++ b/drivers/pci/probe.c
> @@ -693,7 +693,7 @@ static struct pci_bus *pci_alloc_child_bus(struct
> pci_bus *parent,
> }
>
> child->self = bridge;
> - child->bridge = get_device(&bridge->dev);
> + child->bridge = get_device(parent->bridge);
> child->dev.parent = child->bridge;
Hmm, not sure why this is needed. What does get_device(&bridge->dev)
return for you? The next line sets child->dev.parent to child->bridge,
but with your change I'm not sure we end up using the correct parent.
Can you try to revert your change and modify the implementation of pci_domain_nr() in arm64
to look like this:
static inline int pci_domain_nr(struct pci_bus *bus)
{
struct pci_host_bridge *bridge;
while (bus->parent)
bus = bus->parent;
bridge = to_pci_host_bridge(bus->bridge);
if (bridge)
return bridge->domain_nr;
return 0;
}
Please let me know what results you get.
Best regards,
Liviu
> pci_set_bus_of_node(child);
> pci_set_bus_speed(child);
>
> Thanks,
> Tanmay
>
> On Mon, Mar 3, 2014 at 9:33 AM, Liviu Dudau <Liviu.Dudau@xxxxxxx> wrote:
> > pci_alloc_child_bus() uses the newly allocated child bus to figure
> > out the domain number that is going to use for setting the device
> > name. A better option is to use the parent bus domain number.
> >
> > Signed-off-by: Liviu Dudau <Liviu.Dudau@xxxxxxx>
> >
> > diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> > index 26237a0..a12cda5 100644
> > --- a/drivers/pci/probe.c
> > +++ b/drivers/pci/probe.c
> > @@ -677,7 +677,7 @@ static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent,
> > * now as the parent is not properly set up yet.
> > */
> > child->dev.class = &pcibus_class;
> > - dev_set_name(&child->dev, "%04x:%02x", pci_domain_nr(child), busnr);
> > + dev_set_name(&child->dev, "%04x:%02x", pci_domain_nr(parent), busnr);
> >
> > /*
> > * Set up the primary, secondary and subordinate
> > --
> > 1.9.0
> >
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
-------------------
.oooO
( )
\ ( Oooo.
\_) ( )
) /
(_/
One small step
for me ...
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
