This patch adds support for a generic PCI host controller, such as a firmware-initialised device with static windows or an emulation by something such as kvmtool. The controller itself has no configuration registers and has its address spaces described entirely by the device-tree (using the bindings from ePAPR). Both CAM and ECAM are supported for Config Space accesses. Corresponding documentation is added for the DT binding. Signed-off-by: Will Deacon <will.deacon@xxxxxxx> --- Hi, This is version 5 of the patches previously posted here: v1: http://lists.infradead.org/pipermail/linux-arm-kernel/2014-February/229679.html v2: http://lists.infradead.org/pipermail/linux-arm-kernel/2014-February/232213.html v3: http://lists.infradead.org/pipermail/linux-arm-kernel/2014-February/233491.html v4: http://lists.infradead.org/pipermail/linux-arm-kernel/2014-February/235468.html Changes since v4 include: - Changed binding example to use I/O bus address 0x0 - Fixed and simplified rounding code for I/O ranges so that we don't mess around with the registered resource - Finally fixed I/O offset handling Note that I didn't use of_property_read_bool for parsing "linux,pci-probe-only" since that would interfere with "pci=firmware" being passed on the command line (meaning we have a tri-state). I also didn't move the resource registration into gen_pci_calc_*_offset, since that duplicates code and complicates the freeing paths. As per usual, all feedback welcome. The next step is probably to work out a set of library functions that can be extracted from this driver. Will .../devicetree/bindings/pci/host-generic-pci.txt | 100 ++++++ drivers/pci/host/Kconfig | 7 + drivers/pci/host/Makefile | 1 + drivers/pci/host/pci-host-generic.c | 369 +++++++++++++++++++++ 4 files changed, 477 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/host-generic-pci.txt create mode 100644 drivers/pci/host/pci-host-generic.c diff --git a/Documentation/devicetree/bindings/pci/host-generic-pci.txt b/Documentation/devicetree/bindings/pci/host-generic-pci.txt new file mode 100644 index 000000000000..98788c153302 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/host-generic-pci.txt @@ -0,0 +1,100 @@ +* Generic PCI host controller + +Firmware-initialised PCI host controllers and PCI emulations, such as the +virtio-pci implementations found in kvmtool and other para-virtualised +systems, do not require driver support for complexities such as regulator +and clock management. In fact, the controller may not even require the +configuration of a control interface by the operating system, instead +presenting a set of fixed windows describing a subset of IO, Memory and +Configuration Spaces. + +Such a controller can be described purely in terms of the standardized device +tree bindings communicated in pci.txt: + + +Properties of the host controller node: + +- compatible : Must be "pci-host-cam-generic" or "pci-host-ecam-generic" + depending on the layout of configuration space (CAM vs + ECAM respectively). + +- device_type : Must be "pci". + +- ranges : As described in IEEE Std 1275-1994, but must provide + at least a definition of non-prefetchable memory. One + or both of prefetchable Memory and IO Space may also + be provided. + +- bus-range : Optional property (also described in IEEE Std 1275-1994) + to indicate the range of bus numbers for this controller. + If absent, defaults to <0 255> (i.e. all buses). + +- #address-cells : Must be 3. + +- #size-cells : Must be 2. + +- reg : The Configuration Space base address and size, as accessed + from the parent bus. + + +Properties of the /chosen node: + +- linux,pci-probe-only + : Optional property which takes a single-cell argument. + If '0', then Linux will assign devices in its usual manner, + otherwise it will not try to assign devices and instead use + them as they are configured already. + +Configuration Space is assumed to be memory-mapped (as opposed to being +accessed via an ioport) and laid out with a direct correspondence to the +geography of a PCI bus address by concatenating the various components to +form an offset. + +For CAM, this 24-bit offset is: + + cfg_offset(bus, device, function, register) = + bus << 16 | device << 11 | function << 8 | register + +Whilst ECAM extends this by 4 bits to accomodate 4k of function space: + + cfg_offset(bus, device, function, register) = + bus << 20 | device << 15 | function << 12 | register + +Interrupt mapping is exactly as described in `Open Firmware Recommended +Practice: Interrupt Mapping' and requires the following properties: + +- #interrupt-cells : Must be 1 + +- interrupt-map : <see aforementioned specification> + +- interrupt-map-mask : <see aforementioned specification> + + +Example: + +pci { + compatible = "pci-host-cam-generic" + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x0 0x1>; + + // CPU_PHYSICAL(2) SIZE(2) + reg = <0x0 0x40000000 0x0 0x1000000>; + + // BUS_ADDRESS(3) CPU_PHYSICAL(2) SIZE(2) + ranges = <0x0000000 0x0 0x01000000 0x0 0x01000000 0x0 0x00010000>, + <0x1000000 0x0 0x41000000 0x0 0x41000000 0x0 0x3f000000>; + + + #interrupt-cells = <0x1>; + + // PCI_DEVICE(3) INT#(1) CONTROLLER(PHANDLE) CONTROLLER_DATA(3) + interrupt-map = < 0x0 0x0 0x0 0x1 &gic 0x0 0x4 0x1 + 0x800 0x0 0x0 0x1 &gic 0x0 0x5 0x1 + 0x1000 0x0 0x0 0x1 &gic 0x0 0x6 0x1 + 0x1800 0x0 0x0 0x1 &gic 0x0 0x7 0x1>; + + // PCI_DEVICE(3) INT#(1) + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; +} diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig index 47d46c6d8468..f91637d47065 100644 --- a/drivers/pci/host/Kconfig +++ b/drivers/pci/host/Kconfig @@ -33,4 +33,11 @@ config PCI_RCAR_GEN2 There are 3 internal PCI controllers available with a single built-in EHCI/OHCI host controller present on each one. +config PCI_HOST_GENERIC + bool "Generic PCI host controller" + depends on ARM && OF + help + Say Y here if you want to support a simple generic PCI host + controller, such as the one emulated by kvmtool. + endmenu diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile index 13fb3333aa05..bd1bf1ab4ac8 100644 --- a/drivers/pci/host/Makefile +++ b/drivers/pci/host/Makefile @@ -4,3 +4,4 @@ obj-$(CONFIG_PCI_IMX6) += pci-imx6.o obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o +obj-$(CONFIG_PCI_HOST_GENERIC) += pci-host-generic.o diff --git a/drivers/pci/host/pci-host-generic.c b/drivers/pci/host/pci-host-generic.c new file mode 100644 index 000000000000..b761f3e64a6a --- /dev/null +++ b/drivers/pci/host/pci-host-generic.c @@ -0,0 +1,369 @@ +/* + * Simple, generic PCI host controller driver targetting firmware-initialised + * systems and virtual machines (e.g. the PCI emulation provided by kvmtool). + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + * Copyright (C) 2014 ARM Limited + * + * Author: Will Deacon <will.deacon@xxxxxxx> + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/of_pci.h> +#include <linux/platform_device.h> + +struct gen_pci_cfg_bus_ops { + u32 bus_shift; + void __iomem *(*map_bus)(struct pci_bus *, unsigned int, int); +}; + +struct gen_pci_cfg_windows { + struct resource res; + struct resource bus_range; + void __iomem **win; + + const struct gen_pci_cfg_bus_ops *ops; +}; + +struct gen_pci { + struct pci_host_bridge host; + struct gen_pci_cfg_windows cfg; +}; + +static void __iomem *gen_pci_map_cfg_bus_cam(struct pci_bus *bus, + unsigned int devfn, + int where) +{ + struct pci_sys_data *sys = bus->sysdata; + struct gen_pci *pci = sys->private_data; + resource_size_t idx = bus->number - pci->cfg.bus_range.start; + + return pci->cfg.win[idx] + ((devfn << 8) | where); +} + +static struct gen_pci_cfg_bus_ops gen_pci_cfg_cam_bus_ops = { + .bus_shift = 16, + .map_bus = gen_pci_map_cfg_bus_cam, +}; + +static void __iomem *gen_pci_map_cfg_bus_ecam(struct pci_bus *bus, + unsigned int devfn, + int where) +{ + struct pci_sys_data *sys = bus->sysdata; + struct gen_pci *pci = sys->private_data; + resource_size_t idx = bus->number - pci->cfg.bus_range.start; + + return pci->cfg.win[idx] + ((devfn << 12) | where); +} + +static struct gen_pci_cfg_bus_ops gen_pci_cfg_ecam_bus_ops = { + .bus_shift = 20, + .map_bus = gen_pci_map_cfg_bus_ecam, +}; + +static int gen_pci_config_read(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *val) +{ + void __iomem *addr; + struct pci_sys_data *sys = bus->sysdata; + struct gen_pci *pci = sys->private_data; + + addr = pci->cfg.ops->map_bus(bus, devfn, where); + + switch (size) { + case 1: + *val = readb(addr); + break; + case 2: + *val = readw(addr); + break; + default: + *val = readl(addr); + } + + return PCIBIOS_SUCCESSFUL; +} + +static int gen_pci_config_write(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 val) +{ + void __iomem *addr; + struct pci_sys_data *sys = bus->sysdata; + struct gen_pci *pci = sys->private_data; + + addr = pci->cfg.ops->map_bus(bus, devfn, where); + + switch (size) { + case 1: + writeb(val, addr); + break; + case 2: + writew(val, addr); + break; + default: + writel(val, addr); + } + + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops gen_pci_ops = { + .read = gen_pci_config_read, + .write = gen_pci_config_write, +}; + +static int gen_pci_calc_io_offset(struct device *dev, + struct of_pci_range *range, + struct resource *res, + resource_size_t *offset) +{ + static atomic_t wins = ATOMIC_INIT(0); + int err, idx, max_win; + unsigned int window; + + if (!PAGE_ALIGNED(range->cpu_addr)) + return -EINVAL; + + max_win = (IO_SPACE_LIMIT + 1) / SZ_64K; + idx = atomic_inc_return(&wins); + if (idx >= max_win) + return -ENOSPC; + + window = (idx - 1) * SZ_64K; + err = pci_ioremap_io(window, range->cpu_addr); + if (err) + return err; + + of_pci_range_to_resource(range, dev->of_node, res); + res->start = window; + res->end = res->start + range->size - 1; + *offset = window - range->pci_addr; + return 0; +} + +static int gen_pci_calc_mem_offset(struct device *dev, + struct of_pci_range *range, + struct resource *res, + resource_size_t *offset) +{ + of_pci_range_to_resource(range, dev->of_node, res); + *offset = range->cpu_addr - range->pci_addr; + return 0; +} + +static const struct of_device_id gen_pci_of_match[] = { + { .compatible = "pci-host-cam-generic", + .data = &gen_pci_cfg_cam_bus_ops }, + + { .compatible = "pci-host-ecam-generic", + .data = &gen_pci_cfg_ecam_bus_ops }, + + { }, +}; +MODULE_DEVICE_TABLE(of, gen_pci_of_match); + +static int gen_pci_setup(int nr, struct pci_sys_data *sys) +{ + int err, res_valid; + u8 bus_max; + struct pci_host_bridge_window *win; + struct resource *bus_range; + resource_size_t busn; + const char *type; + struct of_pci_range range; + struct of_pci_range_parser parser; + const struct of_device_id *of_id; + const int *prop; + struct gen_pci *pci = sys->private_data; + struct device *dev = pci->host.dev.parent; + struct device_node *np = dev->of_node; + + type = of_get_property(np, "device_type", NULL); + if (!type || strcmp(type, "pci")) { + dev_err(dev, "invalid \"device_type\" %s\n", type); + return -EINVAL; + } + + if (of_pci_range_parser_init(&parser, np)) { + dev_err(dev, "missing \"ranges\" property\n"); + return -EINVAL; + } + + prop = of_get_property(of_chosen, "linux,pci-probe-only", NULL); + if (prop) { + if (*prop) + pci_add_flags(PCI_PROBE_ONLY); + else + pci_clear_flags(PCI_PROBE_ONLY); + } + + if (of_pci_parse_bus_range(np, &pci->cfg.bus_range)) + pci->cfg.bus_range = (struct resource) { + .name = np->name, + .start = 0, + .end = 0xff, + .flags = IORESOURCE_BUS, + }; + + err = of_address_to_resource(np, 0, &pci->cfg.res); + if (err) { + dev_err(dev, "missing \"reg\" property\n"); + return err; + } + + pci->cfg.win = devm_kcalloc(dev, resource_size(&pci->cfg.bus_range), + sizeof(*pci->cfg.win), GFP_KERNEL); + if (!pci->cfg.win) + return -ENOMEM; + + of_id = of_match_node(gen_pci_of_match, np); + pci->cfg.ops = of_id->data; + INIT_LIST_HEAD(&pci->host.windows); + + /* Limit the bus-range to fit within reg */ + bus_max = pci->cfg.bus_range.start + + (resource_size(&pci->cfg.res) >> pci->cfg.ops->bus_shift) - 1; + pci->cfg.bus_range.end = min_t(resource_size_t, pci->cfg.bus_range.end, + bus_max); + + /* Create and register resources from the ranges property */ + res_valid = 0; + for_each_of_pci_range(&parser, &range) { + struct resource *parent, *res; + resource_size_t offset; + u32 restype = range.flags & IORESOURCE_TYPE_BITS; + + res = devm_kmalloc(dev, sizeof(*res), GFP_KERNEL); + if (!res) { + err = -ENOMEM; + goto out_release_res; + } + + switch (restype) { + case IORESOURCE_IO: + parent = &ioport_resource; + err = gen_pci_calc_io_offset(dev, &range, res, &offset); + break; + case IORESOURCE_MEM: + parent = &iomem_resource; + err = gen_pci_calc_mem_offset(dev, &range, res, &offset); + res_valid |= !(res->flags & IORESOURCE_PREFETCH || err); + break; + default: + err = -EINVAL; + continue; + } + + if (err) { + dev_warn(dev, + "error %d: failed to add resource [type 0x%x, %lld bytes]\n", + err, restype, range.size); + continue; + } + + err = request_resource(parent, res); + if (err) + goto out_release_res; + + pci_add_resource_offset(&sys->resources, res, offset); + } + + if (!res_valid) { + dev_err(dev, "non-prefetchable memory resource required\n"); + err = -EINVAL; + goto out_release_res; + } + + /* Map our Configuration Space windows */ + if (!request_mem_region(pci->cfg.res.start, + resource_size(&pci->cfg.res), + "Configuration Space")) + goto out_release_res; + + bus_range = &pci->cfg.bus_range; + for (busn = bus_range->start; busn <= bus_range->end; ++busn) { + u32 idx = busn - bus_range->start; + u32 sz = 1 << pci->cfg.ops->bus_shift; + + pci->cfg.win[idx] = devm_ioremap(dev, + pci->cfg.res.start + busn * sz, + sz); + if (!pci->cfg.win[idx]) { + err = -ENOMEM; + goto out_unmap_cfg; + } + } + + /* Register bus resource */ + pci_add_resource(&sys->resources, bus_range); + return 1; + +out_unmap_cfg: + while (busn-- > bus_range->start) + devm_iounmap(dev, pci->cfg.win[busn - bus_range->start]); + +out_release_res: + release_child_resources(&iomem_resource); + release_child_resources(&ioport_resource); + + list_for_each_entry(win, &sys->resources, list) + devm_kfree(dev, win->res); + pci_free_resource_list(&sys->resources); + + devm_kfree(dev, pci->cfg.win); + return err; +} + +static int gen_pci_probe(struct platform_device *pdev) +{ + struct hw_pci hw; + struct gen_pci *pci; + struct device *dev = &pdev->dev; + + if (!dev->of_node) + return -ENODEV; + + pci = devm_kzalloc(dev, sizeof(*pci), GFP_KERNEL); + if (!pci) + return -ENOMEM; + + pci->host.dev.parent = dev; + hw = (struct hw_pci) { + .nr_controllers = 1, + .private_data = (void **)&pci, + .setup = gen_pci_setup, + .map_irq = of_irq_parse_and_map_pci, + .ops = &gen_pci_ops, + }; + + pci_common_init_dev(dev, &hw); + return 0; +} + +static struct platform_driver gen_pci_driver = { + .driver = { + .name = "pci-host-generic", + .owner = THIS_MODULE, + .of_match_table = gen_pci_of_match, + }, + .probe = gen_pci_probe, +}; +module_platform_driver(gen_pci_driver); + +MODULE_DESCRIPTION("Generic PCI host driver"); +MODULE_AUTHOR("Will Deacon <will.deacon@xxxxxxx>"); +MODULE_LICENSE("GPLv2"); -- 1.8.2.2 -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html