On Wed, Feb 05, 2014 at 11:55:49AM +0100, Andrew Lunn wrote:
> Marvell SoCs place the SoC number into the PCIe endpoint device ID.
> The SoC stepping is placed into the PCIe revision. The old plat-orion
> PCIe driver allowed this information to be seen in user space with a
> simple lspci command.
>
> The new driver places a virtual PCI-PCI bridge on top of these
> endpoints. It has its own hard coded PCI device ID. Thus it is no
> longer possible to see what the SoC is using lspci.
>
> When initializing the PCI-PCI bridge, set its device ID and revision
> from the underlying endpoint, thus restoring this functionality.
> Debian would like to use this in order to aid installing the correct
> DTB file.
>
> Signed-off-by: Andrew Lunn <andrew@xxxxxxx>
Applied to pci/host-mvebu with acks from Thomas and Jason. Since it fixes
a regression, I cherry-picked it into for-linus for v3.14. Thanks!
Bjorn
> ---
> drivers/pci/host/pci-mvebu.c | 11 ++---------
> 1 file changed, 2 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/pci/host/pci-mvebu.c b/drivers/pci/host/pci-mvebu.c
> index 13478ecd4113..0e79665afd44 100644
> --- a/drivers/pci/host/pci-mvebu.c
> +++ b/drivers/pci/host/pci-mvebu.c
> @@ -60,14 +60,6 @@
> #define PCIE_DEBUG_CTRL 0x1a60
> #define PCIE_DEBUG_SOFT_RESET BIT(20)
>
> -/*
> - * This product ID is registered by Marvell, and used when the Marvell
> - * SoC is not the root complex, but an endpoint on the PCIe bus. It is
> - * therefore safe to re-use this PCI ID for our emulated PCI-to-PCI
> - * bridge.
> - */
> -#define MARVELL_EMULATED_PCI_PCI_BRIDGE_ID 0x7846
> -
> /* PCI configuration space of a PCI-to-PCI bridge */
> struct mvebu_sw_pci_bridge {
> u16 vendor;
> @@ -388,7 +380,8 @@ static void mvebu_sw_pci_bridge_init(struct mvebu_pcie_port *port)
>
> bridge->class = PCI_CLASS_BRIDGE_PCI;
> bridge->vendor = PCI_VENDOR_ID_MARVELL;
> - bridge->device = MARVELL_EMULATED_PCI_PCI_BRIDGE_ID;
> + bridge->device = mvebu_readl(port, PCIE_DEV_ID_OFF) >> 16;
> + bridge->revision = mvebu_readl(port, PCIE_DEV_REV_OFF) & 0xff;
> bridge->header_type = PCI_HEADER_TYPE_BRIDGE;
> bridge->cache_line_size = 0x10;
>
> --
> 1.8.5.2
>
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
