On Wed, Jan 15, 2014 at 11:25:28PM +0100, Sander Eikelenboom wrote: > Date: Sun, 12 Jan 2014 04:49:44 +0100 > Subject: [PATCH] In "pci_fixup_video" check if this is or should be the > primary video device to prevent setting the > IORESOURCE_ROM_SHADOW flag on a secondary VGA card > To: Dave Airlie <airlied@xxxxxxxxxx>, > Eiichiro Oiwa <eiichiro.oiwa.nm@xxxxxxxxxxx>, > Greg Kroah-Hartman <gregkh@xxxxxxx> > Cc: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>, > linux-kernel@xxxxxxxxxxxxxxx <linux-kernel@xxxxxxxxxxxxxxx> > > Setting the IORESOURCE_ROM_SHADOW flag on a secondary VGA card prevents if from > reading it's own rom. It will get the content of the shadowrom at C000 instead, > which is of the primary VGA card and the driver of the secondary card will bail > out. > > Fix this by checking if this is or should be the primary video device before > applying the fix and let the comment reflect this. > > Signed-off-by: Sander Eikelenboom <linux@xxxxxxxxxxxxxx> > --- > arch/x86/pci/fixup.c | 17 +++++++++-------- > 1 file changed, 9 insertions(+), 8 deletions(-) > > diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c > index b046e07..525e49a 100644 > --- a/arch/x86/pci/fixup.c > +++ b/arch/x86/pci/fixup.c > @@ -314,9 +314,9 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PC1, pcie_r > * IORESOURCE_ROM_SHADOW is used to associate the boot video > * card with this copy. On laptops this copy has to be used since > * the main ROM may be compressed or combined with another image. > - * See pci_map_rom() for use of this flag. IORESOURCE_ROM_SHADOW > - * is marked here since the boot video device will be the only enabled > - * video device at this point. > + * See pci_map_rom() for use of this flag. Before we mark the device > + * with IORESOURCE_ROM_SHADOW we have to check if this is or should become > + * the primary video card, since this quirk is ran for all video devices. > */ > > static void pci_fixup_video(struct pci_dev *pdev) > @@ -347,12 +347,13 @@ static void pci_fixup_video(struct pci_dev *pdev) > } > bus = bus->parent; > } > - pci_read_config_word(pdev, PCI_COMMAND, &config); > - if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) { > - pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW; > - dev_printk(KERN_DEBUG, &pdev->dev, "Boot video device\n"); > - if (!vga_default_device()) > + if (!vga_default_device() || pdev == vga_default_device()) { > + pci_read_config_word(pdev, PCI_COMMAND, &config); > + if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) { > + pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW; > + dev_printk(KERN_DEBUG, &pdev->dev, "Boot video device\n"); > vga_set_default_device(pdev); > + } ia64 also has a pci_fixup_video() that is essentially the same. Can you fix that one as well, unless there is a reason why the fix applies only to x86 and not to ia64? > } > } > DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID, > -- > 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html