Re: [PATCH 02/12] SPEAr13xx: Move SPEAr1340 definitions to header file

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jan 16, 2014 at 03:25:41PM +0800, Mohit KUMAR DCG wrote:
> Hi Arnd,
> 
> 
> > -----Original Message-----
> > From: Arnd Bergmann [mailto:arnd@xxxxxxxx]
> > Sent: Sunday, December 15, 2013 12:33 AM
> > To: Mohit KUMAR DCG
> > Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux-pci@xxxxxxxxxxxxxxx;
> > Pratyush ANAND; spear-devel; Viresh Kumar
> > Subject: Re: [PATCH 02/12] SPEAr13xx: Move SPEAr1340 definitions to
> > header file
> > 
> > On Friday 13 December 2013, Mohit KUMAR DCG wrote:
> > > > The RST bits should probably go into a drivers/reset driver. Not
> > > > sure what the other registers do, but I'm sure we can find a driver
> > > > for these too, possibly they should be part of the PHY driver?
> > >
> > > -  Perhaps if we implement phy and reset driver then we may not
> > > require to move these definitions and it will address most of your
> > > comments on SPEar13xx pcie driver. I am understanding and working on
> > > this.l
> > >
> 
> Though we are almost ready with v2. But few concerns:
> 
> There are Spear soc common register used for misc configurations of clock, reset etc  for all ips.  Few of 
> registers from the same area are also used for pcie/sata muxing and auxiliary clock configurations.
> For example: sata_miphy_init in arch/arm/mach-spear/spear1340.c also uses these registers.
> 
> We have moved all these sata specific spear1340 configurations in a separate driver.  On the basis of spear-ahci dt 
> Node this driver's probe is called, which further adds ahci platform driver.
> We plan to put all spear1340/1310_pcie_miphy_init/exit functions of patch 9/12 of this series in
> The same driver.
> 
> Now our concern is, what could be the best place to keep that driver, phy, reset or any other framework?
> Or we keep this new driver in arch/arm/mach-spear only.

I think this misc configuration register block resource should be
passed to syscon (drivers/mfd/syscon.c) driver.

regmap_update_bits should be used to update these registers and hence
to configure pcie/sata settings.

As far as place is concerned, that can be kept into mfd and can be
named as spear13xx-syscon.c

Whats your opinion arnd?

Regards
Pratyush

> 
> Regards
> Mohit
> 
> > 
> > Ok, very good.
> > 
> > 	Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux