Hello,
I'm having an issue with my M-Audio Delta 44 soundcard installed into
the PCI->PCIe adapter. When installed into PCI slot on my old computer,
it works perfectly, but the new one lacks PCI slots, so I installed it
using
the adapter (http://www.espada-tech.ru/pr_-12351.shtml)
lspci shows the audio card:
07:00.0 Multimedia audio controller: VIA Technologies Inc. ICE1712
[Envy24] PCI Multi-Channel I/O Controller (rev 02)
but the driver won't load:
snd_ice1712 0000:07:00.0: Refused to change power state, currently in D3
ice1712: No matching model found for ID 0x6c6c6c6c
invalid EEPROM (size = 108)
snd_ice1712: probe of 0000:07:00.0 failed with error -5
Unknown ID and EEPROM size may differ from boot to boot.
Looking into message I see this:
[ 0.384542] pci 0000:05:01.0: BAR 7: can't assign io (size 0x1000)
[ 0.384714] pci 0000:06:00.0: BAR 7: can't assign io (size 0x1000)
[ 0.384885] pci 0000:07:00.0: BAR 3: can't assign io (size 0x40)
[ 0.385056] pci 0000:07:00.0: BAR 0: can't assign io (size 0x20)
[ 0.385227] pci 0000:07:00.0: BAR 1: can't assign io (size 0x10)
[ 0.385411] pci 0000:07:00.0: BAR 2: can't assign io (size 0x10)
The bridge is based on PLX PEX 8112(?) chip and lspci shows:
04:00.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI
Express Gen 2 (5.0 GT/s) Switch (rev ba)
05:01.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI
Express Gen 2 (5.0 GT/s) Switch (rev ba)
05:04.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI
Express Gen 2 (5.0 GT/s) Switch (rev ba)
05:05.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI
Express Gen 2 (5.0 GT/s) Switch (rev ba)
05:06.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI
Express Gen 2 (5.0 GT/s) Switch (rev ba)
05:07.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI
Express Gen 2 (5.0 GT/s) Switch (rev ba)
05:08.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI
Express Gen 2 (5.0 GT/s) Switch (rev ba)
05:09.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI
Express Gen 2 (5.0 GT/s) Switch (rev ba)
06:00.0 PCI bridge: PLX Technology, Inc. PEX 8111 PCI Express-to-PCI
Bridge (rev 21)
my kernel is 3.11.10:
lspci -vvv: http://dpaste.com/1539094/
dmesg: http://dpaste.com/1539095/
I've tried to boot with pci=realloc, but the system hangs in this case
(looks like during initialization
of sound card driver, but I'm not sure, since it hangs completely: no
kernel panic, system just stopped
in the middle of usual boot message)
Feel free to ask for more information.
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
