On Wed, Dec 11, 2013 at 03:08:33PM +0530, Mohit Kumar wrote:
> From: Pratyush Anand <pratyush.anand@xxxxxx>
>
> pp->io_base which is the input of the outbound IO address translation
> unit should be the cpu address, it was programmed wrongly to realio
> address.
>
> We should pass global_io_offset rather than sys->io_offset to
> pci_ioremap_io, so we map the new window into the first available spot
> in the Linux view of the I/O space.
>
> We must also pass cpu address instead of realio address to
> pci_ioremap_io.
>
> This patch fixes above issue. It has been tested with Lecroy PTC in AIC
> mode and Pericom PI7C9X2G303EL PCIe switch, which does not work
> otherwise.
>
> Signed-off-by: Pratyush Anand <pratyush.anand@xxxxxx>
> Tested-by: Mohit Kumar <mohit.kumar@xxxxxx>
> Tested-by: Tim Harvey <tharvey@xxxxxxxxxxxxx>
> Cc: Arnd Bergmann <arnd@xxxxxxxx>
> Cc: Marek Vasut <marex@xxxxxxx>
> Cc: Richard Zhu <Hong-Xing.Zhu@xxxxxxxxxxxxx>
> Cc: linux-pci@xxxxxxxxxxxxxxx
> Cc: spear-devel@xxxxxxxxxxx
Applied to pci/host-designware for v3.14, with these acks:
Reviewed-by: Marek Vasut <marex@xxxxxxx
Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@xxxxxxxxx>
Acked-by: Arnd Bergmann <arnd@xxxxxxxx>
Acked-by: Jingoo Han <jg1.han@xxxxxxxxxxx>
Thanks!
> ---
> drivers/pci/host/pcie-designware.c | 5 ++---
> 1 files changed, 2 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
> index be6ce30..071ebc0 100644
> --- a/drivers/pci/host/pcie-designware.c
> +++ b/drivers/pci/host/pcie-designware.c
> @@ -378,6 +378,7 @@ int __init dw_pcie_host_init(struct pcie_port *pp)
> + global_io_offset);
> pp->config.io_size = resource_size(&pp->io);
> pp->config.io_bus_addr = range.pci_addr;
> + pp->io_base = range.cpu_addr;
> }
> if (restype == IORESOURCE_MEM) {
> of_pci_range_to_resource(&range, np, &pp->mem);
> @@ -403,7 +404,6 @@ int __init dw_pcie_host_init(struct pcie_port *pp)
>
> pp->cfg0_base = pp->cfg.start;
> pp->cfg1_base = pp->cfg.start + pp->config.cfg0_size;
> - pp->io_base = pp->io.start;
> pp->mem_base = pp->mem.start;
>
> pp->va_cfg0_base = devm_ioremap(pp->dev, pp->cfg0_base,
> @@ -573,7 +573,6 @@ static int dw_pcie_wr_other_conf(struct pcie_port *pp, struct pci_bus *bus,
> return ret;
> }
>
> -
> static int dw_pcie_valid_config(struct pcie_port *pp,
> struct pci_bus *bus, int dev)
> {
> @@ -667,7 +666,7 @@ static int dw_pcie_setup(int nr, struct pci_sys_data *sys)
>
> if (global_io_offset < SZ_1M && pp->config.io_size > 0) {
> sys->io_offset = global_io_offset - pp->config.io_bus_addr;
> - pci_ioremap_io(sys->io_offset, pp->io.start);
> + pci_ioremap_io(global_io_offset, pp->io_base);
> global_io_offset += SZ_64K;
> pci_add_resource_offset(&sys->resources, &pp->io,
> sys->io_offset);
> --
> 1.7.0.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
