Re: [PATCH] PCI AER: handle pci_cleanup_aer_uncorrect_error_status() in firmware first mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Dec 13, 2013 at 4:16 PM, Betty Dall <betty.dall@xxxxxx> wrote:
> On Fri, 2013-12-13 at 15:35 -0700, Bjorn Helgaas wrote:
>> On Fri, Dec 13, 2013 at 8:41 AM, Betty Dall <betty.dall@xxxxxx> wrote:
>> > There are three functions exported from aerdrv_core.c that could be
>> > called when the system is in firmware first mode:
>> > pci_enable_pcie_error_reporting(), pci_disable_pcie_error_reporting, and
>> > pci_cleanup_aer_uncorrect_error_status(). The first two functions check if
>> > we are in firmware first mode and return immediately.
>> > pci_cleanup_aer_uncorrect_error_status() does not check firmware first
>> > mode. The problem is that all of these functions should not access the AER
>> > registers in firmware first mode because the firmware has not granted OS
>> > control of the AER registers through the _OSC.
>>
>> This looks like a good fix to me.  If I read aer_acpi_firmware_first()
>> correctly, we don't even *ask* for control of AER if
>> ACPI_HEST_FIRMWARE_FIRST appears anywhere in the HEST.  Does that
>> match your understanding?
>
> Yes, when the system is in firmware first mode the code setting the _OSC
> control register does not ask for AER control.
>
>>
>> > Many drivers call this
>> > function in their pci_error_handlers in firmware first mode.
>>
>> Drivers don't have any idea whether their device is in firmware-first
>> mode, do they?
>
> Right. And I think we want to keep it that way. Having this function is
> a good thing so that the firmware first can be abstracted from the
> drivers.
>
>>
>> > The fix is to change pci_cleanup_aer_uncorrect_error_status() to check
>> > firmware first mode before accessing the AER registers. If it is in firmware
>> > first mode, return 0. I considered returning -EIO, but decided the status
>> > has been cleaned up appropriately for firmware first. Returning 0 also avoids
>> > an error message. Not many places check the return of this function, and the
>> > ones that do, print an error message and continue such as:
>> >    err = pci_cleanup_aer_uncorrect_error_status(pdev);
>> >    if (err) {
>> >        dev_err(&pdev->dev,
>> >            "pci_cleanup_aer_uncorrect_error_status failed 0x%0x\n",
>> >             err); /* non-fatal, continue */
>> >    }
>> > That error message is how I found this problem, and it is not applicable
>> > for the firmware first recovery path.
>>
>> I'm curious -- did you find this problem because you saw a message
>> when pci_cleanup_aer_uncorrect_error_status() returned failure?  The
>> only way it can return failure is if there is no AER capability, and
>> that should be completely independent of whether we're in
>> firmware-first mode.
>
> Yes, I saw the error message during error injection testing and using a
> firmware that denies access to AER control because it is firmware first.
> You are right that it would only print out when there is no AER
> capability. I was reading code looking for places that might access the
> AER registers in firmware first mode. This is the only one I found.

I see why you added a pcie_aer_get_firmware_first() test, because
that's what pci_enable_pcie_error_reporting() and
pci_disable_pcie_error_reporting() do.

But I think we implemented the firmware-first stuff wrong by elevating
the firmware-first concept to the arch-independent level.  The
connection between this and the _OSC negotiation is pretty convoluted,
even on x86.  It's hard to verify by reading the code that we avoid
touching AER if we haven't asked for control or the BIOS declined to
grant it.

I think it would be better if the pci_dev.__aer_firmware_first stuff
were replaced by a more generic "can we use AER?" flag.  That flag
should be set at device enumeration time, so we wouldn't need anything
like the __aer_firmware_first_valid flag.

Bjorn

>> > Signed-off-by: Betty Dall <betty.dall@xxxxxx>
>> > ---
>> >
>> >  drivers/pci/pcie/aer/aerdrv_core.c |    3 +++
>> >  1 files changed, 3 insertions(+), 0 deletions(-)
>> >
>> >
>> > diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c
>> > index b2c8881..1f60408 100644
>> > --- a/drivers/pci/pcie/aer/aerdrv_core.c
>> > +++ b/drivers/pci/pcie/aer/aerdrv_core.c
>> > @@ -62,6 +62,9 @@ int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev)
>> >         int pos;
>> >         u32 status;
>> >
>> > +       if (pcie_aer_get_firmware_first(dev))
>> > +               return 0;
>> > +
>> >         pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
>> >         if (!pos)
>> >                 return -EIO;
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux