On Tue, Nov 26, 2013 at 01:23:28PM -0500, Jason Cooper wrote: > On Tue, Nov 26, 2013 at 11:02:52AM -0700, Jason Gunthorpe wrote: > > There are no writable bits in the secondary status register, only > > write 1 to clear bits. The driver never sets any of the write 1 to > > clear bits so the status register should always be 0, just remove > > the set from the write path. > > > > Someday the write 1 to clear bits should be copied/cleared directly > > from registers in the HW. > > > > Signed-off-by: Jason Gunthorpe <jgunthorpe@xxxxxxxxxxxxxxxxxxxx> > > --- > > drivers/pci/host/pci-mvebu.c | 1 - > > 1 file changed, 1 deletion(-) > > Whole series > > Acked-by: Jason Cooper <jason@xxxxxxxxxxxxxx> Thanks, I applied the Interrupt Line/Pin change to for-linus for v3.13, and the others to pci/host-mvebu for v3.14. Bjorn -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
