When PCI_COMMAND_MEMORY/PCI_COMMAND_IO are cleared the bridge should not allocate windows or even look at the window limit/base registers. Otherwise it can attempt to setup bogus windows that the PCI core code creates during discovery. The core will leave PCI_COMMAND_IO cleared if it doesn't need an IO window. Have mvebu_pcie_handle_*_change respect the bits, and call the change function whenever the bits changes. Signed-off-by: Jason Gunthorpe <jgunthorpe@xxxxxxxxxxxxxxxxxxxx> --- drivers/pci/host/pci-mvebu.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/drivers/pci/host/pci-mvebu.c b/drivers/pci/host/pci-mvebu.c index 19d77c9..721fca9 100644 --- a/drivers/pci/host/pci-mvebu.c +++ b/drivers/pci/host/pci-mvebu.c @@ -279,7 +279,8 @@ static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port) /* Are the new iobase/iolimit values invalid? */ if (port->bridge.iolimit < port->bridge.iobase || - port->bridge.iolimitupper < port->bridge.iobaseupper) { + port->bridge.iolimitupper < port->bridge.iobaseupper || + !(port->bridge.command & PCI_COMMAND_IO)) { /* If a window was configured, remove it */ if (port->iowin_base) { @@ -316,7 +317,8 @@ static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port) static void mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port) { /* Are the new membase/memlimit values invalid? */ - if (port->bridge.memlimit < port->bridge.membase) { + if (port->bridge.memlimit < port->bridge.membase || + !(port->bridge.command & PCI_COMMAND_MEMORY)) { /* If a window was configured, remove it */ if (port->memwin_base) { @@ -464,8 +466,16 @@ static int mvebu_sw_pci_bridge_write(struct mvebu_pcie_port *port, switch (where & ~3) { case PCI_COMMAND: + { + u32 old = bridge->command; + bridge->command = value & 0xffff; + if ((old ^ bridge->command) & PCI_COMMAND_IO) + mvebu_pcie_handle_iobase_change(port); + if ((old ^ bridge->command) & PCI_COMMAND_MEMORY) + mvebu_pcie_handle_membase_change(port); break; + } case PCI_BASE_ADDRESS_0 ... PCI_BASE_ADDRESS_1: bridge->bar[((where & ~3) - PCI_BASE_ADDRESS_0) / 4] = value; -- 1.8.1.2 -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html