The FSL MSI will provide the interface to get:
- Number of MSI regions (which is number of MSI banks for powerpc)
- Get the region address range: Physical page which have the
address/addresses used for generating MSI interrupt
and size of the page.
These are required to create IOMMU (Freescale PAMU) mapping for
devices which are directly assigned using VFIO.
Signed-off-by: Bharat Bhushan <bharat.bhushan@xxxxxxxxxxxxx>
---
arch/powerpc/sysdev/fsl_msi.c | 42 +++++++++++++++++++++++++++++++++++-----
arch/powerpc/sysdev/fsl_msi.h | 11 ++++++++-
2 files changed, 45 insertions(+), 8 deletions(-)
diff --git a/arch/powerpc/sysdev/fsl_msi.c b/arch/powerpc/sysdev/fsl_msi.c
index 77efbae..eeebbf0 100644
--- a/arch/powerpc/sysdev/fsl_msi.c
+++ b/arch/powerpc/sysdev/fsl_msi.c
@@ -109,6 +109,34 @@ static int fsl_msi_init_allocator(struct fsl_msi *msi_data)
return 0;
}
+static int fsl_msi_get_region_count(void)
+{
+ int count = 0;
+ struct fsl_msi *msi_data;
+
+ list_for_each_entry(msi_data, &msi_head, list)
+ count++;
+
+ return count;
+}
+
+static int fsl_msi_get_region(int region_num, struct msi_region *region)
+{
+ struct fsl_msi *msi_data;
+
+ list_for_each_entry(msi_data, &msi_head, list) {
+ if (msi_data->bank_index == region_num) {
+ region->region_num = msi_data->bank_index;
+ /* Setting PAGE_SIZE as MSIIR is a 4 byte register */
+ region->size = PAGE_SIZE;
+ region->addr = msi_data->msiir & ~(region->size - 1);
+ return 0;
+ }
+ }
+
+ return -ENODEV;
+}
+
static int fsl_msi_check_device(struct pci_dev *pdev, int nvec, int type)
{
if (type == PCI_CAP_ID_MSIX)
@@ -150,7 +178,8 @@ static void fsl_compose_msi_msg(struct pci_dev *pdev, int hwirq,
if (reg && (len == sizeof(u64)))
address = be64_to_cpup(reg);
else
- address = fsl_pci_immrbar_base(hose) + msi_data->msiir_offset;
+ address = fsl_pci_immrbar_base(hose) +
+ (msi_data->msiir & 0xfffff);
msg->address_lo = lower_32_bits(address);
msg->address_hi = upper_32_bits(address);
@@ -393,6 +422,7 @@ static int fsl_of_msi_probe(struct platform_device *dev)
const struct fsl_msi_feature *features;
int len;
u32 offset;
+ static atomic_t bank_index = ATOMIC_INIT(-1);
match = of_match_device(fsl_of_msi_ids, &dev->dev);
if (!match)
@@ -436,18 +466,15 @@ static int fsl_of_msi_probe(struct platform_device *dev)
dev->dev.of_node->full_name);
goto error_out;
}
- msi->msiir_offset =
- features->msiir_offset + (res.start & 0xfffff);
/*
* First read the MSIIR/MSIIR1 offset from dts
* On failure use the hardcode MSIIR offset
*/
if (of_address_to_resource(dev->dev.of_node, 1, &msiir))
- msi->msiir_offset = features->msiir_offset +
- (res.start & MSIIR_OFFSET_MASK);
+ msi->msiir = res.start + features->msiir_offset;
else
- msi->msiir_offset = msiir.start & MSIIR_OFFSET_MASK;
+ msi->msiir = msiir.start;
}
msi->feature = features->fsl_pic_ip;
@@ -521,6 +548,7 @@ static int fsl_of_msi_probe(struct platform_device *dev)
}
}
+ msi->bank_index = atomic_inc_return(&bank_index);
list_add_tail(&msi->list, &msi_head);
/* The multiple setting ppc_md.setup_msi_irqs will not harm things */
@@ -528,6 +556,8 @@ static int fsl_of_msi_probe(struct platform_device *dev)
ppc_md.setup_msi_irqs = fsl_setup_msi_irqs;
ppc_md.teardown_msi_irqs = fsl_teardown_msi_irqs;
ppc_md.msi_check_device = fsl_msi_check_device;
+ ppc_md.msi_get_region_count = fsl_msi_get_region_count;
+ ppc_md.msi_get_region = fsl_msi_get_region;
} else if (ppc_md.setup_msi_irqs != fsl_setup_msi_irqs) {
dev_err(&dev->dev, "Different MSI driver already installed!\n");
err = -ENODEV;
diff --git a/arch/powerpc/sysdev/fsl_msi.h b/arch/powerpc/sysdev/fsl_msi.h
index df9aa9f..a2cc5a2 100644
--- a/arch/powerpc/sysdev/fsl_msi.h
+++ b/arch/powerpc/sysdev/fsl_msi.h
@@ -31,14 +31,21 @@ struct fsl_msi {
struct irq_domain *irqhost;
unsigned long cascade_irq;
-
- u32 msiir_offset; /* Offset of MSIIR, relative to start of CCSR */
+ phys_addr_t msiir; /* MSIIR Address in CCSR */
u32 ibs_shift; /* Shift of interrupt bit select */
u32 srs_shift; /* Shift of the shared interrupt register select */
void __iomem *msi_regs;
u32 feature;
int msi_virqs[NR_MSI_REG_MAX];
+ /*
+ * During probe each bank is assigned a index number.
+ * index number start from 0.
+ * Example MSI bank 1 = 0
+ * MSI bank 2 = 1, and so on.
+ */
+ int bank_index;
+
struct msi_bitmap bitmap;
struct list_head list; /* support multiple MSI banks */
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
