The IMX6 iATU is used for address translation between the AXI bus
address space and PCI address space. This is used for type0 and type1
config cycles but is not necessary for outbound io/mem regions.
This patch removes the calls that inappropriately re-configures the ATU
viewport for outbound memory and IO after config cycles and removes them
altogether as they are not necessary.
This resolves issues with PCI devices behind switches and has been tested with
a Gige device behind a PLX PEX860x switch. More testing is needed for other
configurations.
Signed-off-by: Tim Harvey <tharvey@xxxxxxxxxxxxx>
---
drivers/pci/host/pcie-designware.c | 41 +++---------------------------------
1 file changed, 3 insertions(+), 38 deletions(-)
diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
index 5d1f268..6cce779 100644
--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
@@ -46,7 +46,6 @@
#define PCIE_ATU_VIEWPORT 0x900
#define PCIE_ATU_REGION_INBOUND (0x1 << 31)
#define PCIE_ATU_REGION_OUTBOUND (0x0 << 31)
-#define PCIE_ATU_REGION_INDEX1 (0x1 << 0)
#define PCIE_ATU_REGION_INDEX0 (0x0 << 0)
#define PCIE_ATU_CR1 0x904
#define PCIE_ATU_TYPE_MEM (0x0 << 0)
@@ -502,8 +501,8 @@ static void dw_pcie_prog_viewport_cfg0(struct pcie_port *pp, u32 busdev)
static void dw_pcie_prog_viewport_cfg1(struct pcie_port *pp, u32 busdev)
{
- /* Program viewport 1 : OUTBOUND : CFG1 */
- dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1,
+ /* Program viewport 0 : OUTBOUND : CFG1 */
+ dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0,
PCIE_ATU_VIEWPORT);
dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_CFG1, PCIE_ATU_CR1);
dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
@@ -513,38 +512,8 @@ static void dw_pcie_prog_viewport_cfg1(struct pcie_port *pp, u32 busdev)
PCIE_ATU_LIMIT);
dw_pcie_writel_rc(pp, busdev, PCIE_ATU_LOWER_TARGET);
dw_pcie_writel_rc(pp, 0, PCIE_ATU_UPPER_TARGET);
-}
-
-static void dw_pcie_prog_viewport_mem_outbound(struct pcie_port *pp)
-{
- /* Program viewport 0 : OUTBOUND : MEM */
- dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0,
- PCIE_ATU_VIEWPORT);
- dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_MEM, PCIE_ATU_CR1);
- dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
- dw_pcie_writel_rc(pp, pp->mem_base, PCIE_ATU_LOWER_BASE);
- dw_pcie_writel_rc(pp, (pp->mem_base >> 32), PCIE_ATU_UPPER_BASE);
- dw_pcie_writel_rc(pp, pp->mem_base + pp->config.mem_size - 1,
- PCIE_ATU_LIMIT);
- dw_pcie_writel_rc(pp, pp->config.mem_bus_addr, PCIE_ATU_LOWER_TARGET);
- dw_pcie_writel_rc(pp, upper_32_bits(pp->config.mem_bus_addr),
- PCIE_ATU_UPPER_TARGET);
-}
-
-static void dw_pcie_prog_viewport_io_outbound(struct pcie_port *pp)
-{
- /* Program viewport 1 : OUTBOUND : IO */
- dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1,
- PCIE_ATU_VIEWPORT);
- dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_IO, PCIE_ATU_CR1);
+ dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_CFG1, PCIE_ATU_CR1);
dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
- dw_pcie_writel_rc(pp, pp->io_base, PCIE_ATU_LOWER_BASE);
- dw_pcie_writel_rc(pp, (pp->io_base >> 32), PCIE_ATU_UPPER_BASE);
- dw_pcie_writel_rc(pp, pp->io_base + pp->config.io_size - 1,
- PCIE_ATU_LIMIT);
- dw_pcie_writel_rc(pp, pp->config.io_bus_addr, PCIE_ATU_LOWER_TARGET);
- dw_pcie_writel_rc(pp, upper_32_bits(pp->config.io_bus_addr),
- PCIE_ATU_UPPER_TARGET);
}
static int dw_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus,
@@ -560,11 +529,9 @@ static int dw_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus,
if (bus->parent->number == pp->root_bus_nr) {
dw_pcie_prog_viewport_cfg0(pp, busdev);
ret = cfg_read(pp->va_cfg0_base + address, where, size, val);
- dw_pcie_prog_viewport_mem_outbound(pp);
} else {
dw_pcie_prog_viewport_cfg1(pp, busdev);
ret = cfg_read(pp->va_cfg1_base + address, where, size, val);
- dw_pcie_prog_viewport_io_outbound(pp);
}
return ret;
@@ -583,11 +550,9 @@ static int dw_pcie_wr_other_conf(struct pcie_port *pp, struct pci_bus *bus,
if (bus->parent->number == pp->root_bus_nr) {
dw_pcie_prog_viewport_cfg0(pp, busdev);
ret = cfg_write(pp->va_cfg0_base + address, where, size, val);
- dw_pcie_prog_viewport_mem_outbound(pp);
} else {
dw_pcie_prog_viewport_cfg1(pp, busdev);
ret = cfg_write(pp->va_cfg1_base + address, where, size, val);
- dw_pcie_prog_viewport_io_outbound(pp);
}
return ret;
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
