Hi Tim, > On Thu, Oct 10, 2013 at 3:40 AM, Zhu Richard-R65037 > > <r65037@xxxxxxxxxxxxx> wrote: > > host=10.192.242.95, domain=ap.freescale.net, nis-domain=(none) > > bootserver=0.0.0.0, rootserver=10.192.225.216, rootpath= > > nameserver0=10.192.130.201, nameserver1=10.211.0.3, > > nameserver2=10.196.51.200 > > > > ALSA device list: > > #0: wm8962-audio > > #1: imx-hdmi-soc > > > > VFS: Mounted root (nfs filesystem) on device 0:11. > > devtmpfs: mounted > > Freeing unused kernel memory: 300K (80c29000 - 80c74000) > > Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b > > <--System panic here sometimes. :( > > Marek, > > This is where an imprecise abort is triggered - refer to my comments > regarding the abort handler at > http://thread.gmane.org/gmane.linux.drivers.devicetree/44659/focus=46171 > - you should disable the bumping of the PC and/or the handler. Good point. > Did this patch ever get applied and if so what git tree? I would like > to continue testing it as well with the boards I have that have a > switch. V7 has the handler, yes. http://patchwork.ozlabs.org/patch/278088/ http://patchwork.ozlabs.org/patch/278087/ You will also need to dig out the arm-specific portion from v6 3/3 so that the PCIe would probe: http://patchwork.ozlabs.org/patch/275169/ And apply the clock patch: http://patchwork.ozlabs.org/patch/275167/ Do you have any luck working with the bridge? I have this resource collision as seen in this thread. Best regards, Marek Vasut -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
