Hi Bjorn,
> On Thu, Oct 10, 2013 at 4:25 AM, Marek Vasut <marex@xxxxxxx> wrote:
> > In the meantime, this is what I see upon probe with V6 of the patches:
> >
> > Linux version 3.12.0-rc2-next-20130927+
> > [...]
> > imx6q-pcie 1ffc000.pcie: phy link never came up
> > PCI host bridge to bus 0000:00
> > pci_bus 0000:00: root bus resource [io 0x1000-0x10000]
> > pci_bus 0000:00: root bus resource [mem 0x01000000-0x01efffff]
> > pci_bus 0000:00: No busn resource found for root bus, will use [bus
> > 00-ff]
>
> This indicates a bug in your host bridge driver. You must supply the
> bus number range claimed by the host bridge. There's no way the PCI
> core can figure that out itself. We do assume [bus 00-ff], but that's
> only a fallback and will prevent multi-host bridge configurations from
> working.
Ah, thanks for this information, this is very helpful! I implemented mx6 PCIe
driver for U-Boot and this is my topology (detected by U-Boot)
00:01.0 - 16c3:abcd - Bridge device
01:00.0 - 12d8:2303 - Bridge device
02:01.0 - 12d8:2303 - Bridge device
03:00.0 - 8086:1531 - Network controller
02:02.0 - 12d8:2303 - Bridge device
(The mnenomic is BUS:DEV.FN)
So I shouldn't even touch 0000:00:00.0 in Linux, but use 0000:00:01.0 as that's
the root hub (16c3:abcd), no?
> > PCI: bus0: Fast back to back transfers disabled
> > PCI: bus1: Fast back to back transfers enabled
> > PCI: Device 0000:00:00.0 not available because of resource collisions
> > pcieport: probe of 0000:00:00.0 failed with error -22
>
> If you boot with "ignore_loglevel", you should see more details about
> this device, including the BAR values we read from it. Based on
> pcibios_enable_device() in arch/arm/kernel/bios32.c, my guess is that
> 00:00.0 has an uninitialized BAR (maybe it is in power-on state), and
> you didn't do anything to assign the BAR before trying to bind the
> pcieport driver to it. You might be missing a call to
> pci_bus_assign_resources() or pci_assign_unassigned_resources().
Will check this, thank you!
> > pci 0000:00:00.0: BAR 0: assigned [mem 0x01000000-0x010fffff]
> > pci 0000:00:00.0: BAR 6: assigned [mem 0x01100000-0x0110ffff pref]
> > pci 0000:00:00.0: PCI bridge to [bus 01]
> > pci 0000:00:00.0: PCI bridge to [bus 01]
> >
> > Is this line normal/expected? Is this related to the PCIe switch I have
> > there? pcieport: probe of 0000:00:00.0 failed with error -22
> >
> > Thank you for your help!
> >
> > Best regards,
> > Marek Vasut
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
