This patchset adds support for the PCI Express port present on the i.MX6 SoC. The port is based on Synopsis Designware IP with a custom PHY. Changes since v4: - Add an abort exception handler - Fix register ordering in imx6q-iomuxc-gpr.h - Enable sata_ref_100m during clock initialization - Minor changes to lvds[12]_gate definitions Changes since v3: - Moved clock initialization to board clock file - Reworked memory range layout - Reduced the duration of several sleep calls Changes since v2: - Reworked source file with Sascha Hauer's suggestions Changes since v1: - Use the Designware controller code for BAR initialization Sean Cross (3): ARM: imx: Add LVDS general-purpose clocks to i.MX6Q ARM: imx6q: Add PCIe bits to GPR syscon definition PCI: imx6: Add support for i.MX6 PCIe controller .../devicetree/bindings/clock/imx6q-clock.txt | 4 + .../devicetree/bindings/pci/designware-pcie.txt | 5 + arch/arm/boot/dts/imx6qdl.dtsi | 16 + arch/arm/mach-imx/Kconfig | 2 + arch/arm/mach-imx/clk-imx6q.c | 34 +- drivers/pci/host/Kconfig | 6 + drivers/pci/host/Makefile | 1 + drivers/pci/host/pci-imx6.c | 499 ++++++++++++++++++++ include/linux/mfd/syscon/imx6q-iomuxc-gpr.h | 8 + 9 files changed, 574 insertions(+), 1 deletion(-) create mode 100644 drivers/pci/host/pci-imx6.c -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
