On Tue, Sep 03, 2013 at 03:35:09PM +0800, Yijing Wang wrote: > Pcie_capability_xxx() interfaces were introudced to > simplify code to access PCIe Cap config space. And > because PCI core saves the PCIe Cap offset in > set_pcie_port_type() when device is enumerated. > So we can use pci_is_pcie() instead. > > Signed-off-by: Yijing Wang <wangyijing@xxxxxxxxxx> > Cc: Jiang Liu <jiang.liu@xxxxxxxxxx> > Cc: Anil Gurumurthy <agurumur@xxxxxxxxxxx> > Cc: Vijaya Mohan Guvva <vmohan@xxxxxxxxxxx> > Cc: "James E.J. Bottomley" <JBottomley@xxxxxxxxxxxxx> > Cc: linux-scsi@xxxxxxxxxxxxxxx > Cc: linux-kernel@xxxxxxxxxxxxxxx > --- > drivers/scsi/bfa/bfad.c | 9 +++------ > 1 files changed, 3 insertions(+), 6 deletions(-) > > diff --git a/drivers/scsi/bfa/bfad.c b/drivers/scsi/bfa/bfad.c > index 9611195..d726b81 100644 > --- a/drivers/scsi/bfa/bfad.c > +++ b/drivers/scsi/bfa/bfad.c > @@ -767,7 +767,6 @@ bfad_pci_init(struct pci_dev *pdev, struct bfad_s *bfad) > > /* Adjust PCIe Maximum Read Request Size */ > if (pcie_max_read_reqsz > 0) { > - int pcie_cap_reg; > u16 pcie_dev_ctl; > u16 mask = 0xffff; > > @@ -794,10 +793,8 @@ bfad_pci_init(struct pci_dev *pdev, struct bfad_s *bfad) > break; > } > > - pcie_cap_reg = pci_find_capability(pdev, PCI_CAP_ID_EXP); > - if (mask != 0xffff && pcie_cap_reg) { > - pcie_cap_reg += 0x08; > - pci_read_config_word(pdev, pcie_cap_reg, &pcie_dev_ctl); > + if (mask != 0xffff && pci_is_pcie(pdev)) { Please move the pci_is_pcie() test up to the "if (pcie_mas_read_reqsz ..." statement. There's no point in doing the switch statement if this isn't a PCIe device. > + pcie_capability_read_word(pdev, PCI_EXP_DEVCTL, &pcie_dev_ctl); > if ((pcie_dev_ctl & 0x7000) != mask) { > printk(KERN_WARNING "BFA[%s]: " > "pcie_max_read_request_size is %d, " > @@ -806,7 +803,7 @@ bfad_pci_init(struct pci_dev *pdev, struct bfad_s *bfad) > pcie_max_read_reqsz); > > pcie_dev_ctl &= ~0x7000; > - pci_write_config_word(pdev, pcie_cap_reg, > + pcie_capability_write_word(pdev, PCI_EXP_DEVCTL, > pcie_dev_ctl | mask); Please rework this to use pcie_set_readrq() instead of writing the capability directly. If we write the capability directly, we risk writing a value that is incompatible with the MPS configuration done by the PCI core. > } > } > -- > 1.7.1 > > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html