Link to the bug report: http://marc.info/?l=linux-edac&m=137692201732220&w=2 dct_base and dct_limit obtain 32 bit register values when they read their respective pci config space registers. A left shift beyond 32 bits will cause them to wrap around. Similar case for chan_addr as can be seen from the bug report. In the patch, we rectify this by casting chan_addr to u64 and by comparing dct_base and dct_limit against (sys_addr >> 27) Tested on F15h, M30h with ECC turned on and works fine. Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@xxxxxxx> diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index b86228c..eb4793e 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -1558,11 +1558,12 @@ static int f15_m30h_match_to_this_node(struct amd64_pvt *pvt, unsigned range, } /* Verify sys_addr is within DCT Range. */ - dct_base = (dct_sel_baseaddr(pvt) << 27); - dct_limit = (((dct_cont_limit_reg >> 11) & 0x1FFF) << 27) | 0x7FFFFFF; + dct_base = dct_sel_baseaddr(pvt); + dct_limit = (dct_cont_limit_reg >> 11) & 0x1FFF; if (!(dct_cont_base_reg & BIT(0)) && - !(dct_base <= sys_addr && dct_limit >= sys_addr)) + !(dct_base <= (sys_addr >> 27) && + dct_limit >= (sys_addr >> 27))) return -EINVAL; /* Verify number of dct's that participate in channel interleaving. */ @@ -1614,7 +1615,7 @@ static int f15_m30h_match_to_this_node(struct amd64_pvt *pvt, unsigned range, amd64_read_pci_cfg(pvt->F1, DRAM_CONT_HIGH_OFF + (int) channel * 4, &tmp); - chan_addr += ((tmp >> 11) & 0xfff) << 27; + chan_addr += (u64) ((tmp >> 11) & 0xfff) << 27; } f15h_select_dct(pvt, channel); -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
