[+cc linuxppc-dev] On Mon, Aug 5, 2013 at 5:17 AM, Leon Ravich <lravich@xxxxxxxxx> wrote: > Hi all , > I am trying to upgrade ours embedded device (freescale powerPC P2020 cpu) > linux kernel , till now we used 2.6.32 I am trying to upgrade to 3.8.13 . > I took the source from freescale git: > git://git.freescale.com/ppc/sdk/linux.git > > on our embedded device we have an FPGA connected through PCIE . > > on each boot we loading the rbf design to the FPGA and the rescan pci bus to let > kernel detect it . > > during the rescan I getting error messages: > genirq: Setting trigger mode 0 for irq 27 failed > (mpc8xxx_irq_set_type+0x0/0xec) > [ 22.060898] genirq: Setting trigger mode 0 for irq 28 failed > (mpc8xxx_irq_set_type+0x0/0xec) > [ 22.069461] genirq: Setting trigger mode 0 for irq 31 failed > (mpc8xxx_irq_set_type+0x0/0xec) > [ 22.078010] genirq: Setting trigger mode 0 for irq 32 failed > (mpc8xxx_irq_set_type+0x0/0xec) > [ 22.086576] genirq: Setting trigger mode 0 for irq 33 failed > (mpc8xxx_irq_set_type+0x0/0xec) > [ 22.095143] genirq: Setting trigger mode 0 for irq 37 failed > (mpc8xxx_irq_set_type+0x0/0xec) > [ 22.103715] genirq: Setting trigger mode 0 for irq 38 failed > (mpc8xxx_irq_set_type+0x0/0xec) > [ 22.112282] genirq: Setting trigger mode 0 for irq 39 failed > (mpc8xxx_irq_set_type+0x0/0xec) Hmm, I don't know much about IRQ issues. > [ 37.945785] pci 0000:00:00.0: ignoring class 0x0b2000 (doesn't > match header type 01) There's a recent patch related to this: http://lkml.kernel.org/r/1374823418-1550-1-git-send-email-Chunhe.Lan@xxxxxxxxxxxxx > [ 37.953640] PCIE error(s) detected > [ 37.953858] pci 0000:00:00.0: PCI bridge to [bus 01-ff] > [ 37.953988] pci 0000:00:00.0: BAR 8: assigned [mem 0xc0000000-0xdfffffff] > [ 37.953994] pci 0000:00:00.0: BAR 7: can't assign io (size 0x10000) > [ 37.954000] pci 0000:01:00.0: BAR 0: assigned [mem 0xc0000000-0xc00fffff] > [ 37.954013] pci 0000:01:00.0: BAR 1: assigned [mem 0xc0100000-0xc017ffff] > [ 37.954025] pci 0000:01:00.0: BAR 2: assigned [mem 0xc0180000-0xc01fffff] > [ 37.954036] pci 0000:00:00.0: PCI bridge to [bus 01] > [ 37.954041] pci 0000:00:00.0: bridge window [mem 0xc0000000-0xdfffffff] > [ 38.007354] PCIE ERR_DR register: 0x80020000 > [ 38.011613] PCIE ERR_CAP_STAT register: 0x00000041 > [ 38.016392] PCIE ERR_CAP_R0 register: 0x00000800 > [ 38.020997] PCIE ERR_CAP_R1 register: 0x00000000 > [ 38.025602] PCIE ERR_CAP_R2 register: 0x00000000 > [ 38.030207] PCIE ERR_CAP_R3 register: 0x00000000 > > > and after a few minutes I linux reboot it self, > > > where can I start debugging it?? I'd start by applying the header quirk patch above, then comparing the complete console log (boot with "ignore_loglevel") from 2.6.32 and 3.8.13. Bjorn -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
