Re: [PATCH] PCI: Separate stop and remove devices in pciehp

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jul 26, 2013 at 3:05 PM, Bjorn Helgaas <bhelgaas@xxxxxxxxxx> wrote:
> On Tue, Jul 23, 2013 at 10:00 PM, Yijing Wang <wangyijing@xxxxxxxxxx> wrote:
>> Hi Yinghai,
>>    The third patch make pci_stop_dev call pci_disable_sriov(dev).
>> It looks asymmetrical, because pci_enable_sriov(dev, NR_VIRTFN) always
>> be called by device driver. Why not work around this in device driver like ixgbe?
>> I'm not familiar with SRIOV, so I'm just a bit puzzled.
>>
>> Thanks!
>> Yijing.
>>
>> ------------------------------------------------------------
>> Some driver (like ixgbe) does not call pci_disable_sriov() if
>> sriov is enabled via /sys/.../sriov_numvfs setting.
>> ixgbe does allow driver for PF get detached, but still have VFs
>> around.
>>
>> But how about PF get removed via /sys or pciehp finally?
>>
>> During hot-remove, VF will still hold one ref to PF and it
>> prevent PF to be removed.
>> That make the next hot-add fails, as old PF dev struct is still around.
>>
>> We need to add pci_disable_sriov() calling during stop PF .
>>
>> Need this one for v3.11
>>
>> -v2: Accoring to Bjorn, move that calling to pci_stop_dev.
>>
>> Signed-off-by: Yinghai Lu <yinghai@xxxxxxxxxx>
>> Cc: Jiang Liu <liuj97@xxxxxxxxx>
>> Cc: Alexander Duyck <alexander.h.duyck@xxxxxxxxx>
>> Cc: Donald Dutile <ddutile@xxxxxxxxxx>
>> Cc: Greg Rose <gregory.v.rose@xxxxxxxxx>
>>
>> ---
>>  drivers/pci/remove.c |    2 ++
>>  1 file changed, 2 insertions(+)
>>
>> Index: linux-2.6/drivers/pci/remove.c
>> ===================================================================
>> --- linux-2.6.orig/drivers/pci/remove.c
>> +++ linux-2.6/drivers/pci/remove.c
>> @@ -25,6 +25,8 @@ static void pci_stop_dev(struct pci_dev
>>                 pci_proc_detach_device(dev);
>>                 pci_remove_sysfs_dev_files(dev);
>>                 device_del(&dev->dev);
>> +               /* remove VF, if PF driver skip that */
>> +               pci_disable_sriov(dev);
>>                 dev->is_added = 0;
>>         }
>
> Can you post these as a new thread with -v2 patches?

ok, will repost them on top of pci/for-linus

>
> Why did you put pci_disable_sriov() inside the "if (dev->is_added)"
> block?  Is it related to is_added?

yes, only have pci_enable_sriov when is_added is true.
driver is detached when device_del() is called, and at that time
pci_disable_sriov should be just called.

Thanks

Yinghai
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux