From: Stephen Warren <swarren@xxxxxxxxxx>
Beaver's PCIe lane configuration most closely matches x2 x2 x2 rather
than x4 x1 x1, since clocks 0 and 2 are used, and lanes 0 and 5 are used,
and the only way those align is with a x2 x2 x2 configuration.
Also, disable root port 1; there's nothing connected to it. Root port 0
is the on-board PCIe Ethernet, and port 2 is the mini-PCIe slot.
Signed-off-by: Stephen Warren <swarren@xxxxxxxxxx>
Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
---
arch/arm/boot/dts/tegra30-beaver.dts | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts
index 4d9fa31..e1dd644 100644
--- a/arch/arm/boot/dts/tegra30-beaver.dts
+++ b/arch/arm/boot/dts/tegra30-beaver.dts
@@ -18,16 +18,16 @@
pci@1,0 {
status = "okay";
- nvidia,num-lanes = <4>;
+ nvidia,num-lanes = <2>;
};
pci@2,0 {
- status = "okay";
- nvidia,num-lanes = <1>;
+ nvidia,num-lanes = <2>;
};
pci@3,0 {
- nvidia,num-lanes = <1>;
+ status = "okay";
+ nvidia,num-lanes = <2>;
};
};
--
1.8.1.5
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
