Re: [PATCH v2 3/3] PCI/AER: Provide reset_link for firmware first root port

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jun 4, 2013 at 3:38 PM, Betty Dall <betty.dall@xxxxxx> wrote:
> On Tue, 2013-06-04 at 04:36 -0400, Chen Gong wrote:
>> On Thu, May 30, 2013 at 08:39:29AM -0600, Betty Dall wrote:
>> > Date:       Thu, 30 May 2013 08:39:29 -0600
>> > From: Betty Dall <betty.dall@xxxxxx>
>> > To: rjw@xxxxxxx, bhelgaas@xxxxxxxxxx
>> > Cc: ying.huang@xxxxxxxxx, linux-acpi@xxxxxxxxxxxxxxx,
>> >  linux-kernel@xxxxxxxxxxxxxxx, linux-pci@xxxxxxxxxxxxxxx, Betty Dall
>> >  <betty.dall@xxxxxx>
>> > Subject: [PATCH v2 3/3] PCI/AER: Provide reset_link for firmware first root
>> >  port
>> > X-Mailer: git-send-email 1.7.7.6
>> >
>> > The firmware first path does not install the aerdrv root port
>> > service driver, so the firmware first root port does not have
>> > a reset_link callback. When a firmware first root port does not have
>> > a reset_link callback, use a new default reset_link similar to what
>> > we already do for the default_downstream_reset_link(). The firmware
>> > first default reset_link brings the root port out of SBR if firmware
>> > left it in SBR.
>> >
>> > Changes since v1:
>> > Removed incorrect setting of p2p_ctrl after the read.
>> >
>> > Signed-off-by: Betty Dall <betty.dall@xxxxxx>
>> > ---
>> >
>> >  drivers/pci/pcie/aer/aerdrv_core.c |   36 ++++++++++++++++++++++++++++++++++++
>> >  1 files changed, 36 insertions(+), 0 deletions(-)
>> >
>> >
>> > diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c
>> > index 8ec8b4f..72f76cd 100644
>> > --- a/drivers/pci/pcie/aer/aerdrv_core.c
>> > +++ b/drivers/pci/pcie/aer/aerdrv_core.c
>> > @@ -413,6 +413,39 @@ static pci_ers_result_t default_downstream_reset_link(struct pci_dev *dev)
>> >     return PCI_ERS_RESULT_RECOVERED;
>> >  }
>> >
>> > +/**
>> > + * default_ff_root_port_reset_link - default reset function for firmware
>> > + *         first Root Port
>> > + * @dev: pointer to root port's pci_dev data structure
>> > + *
>> > + * Invoked when performing link reset at Root Port w/ no aer driver.
>> > + * This happens through the firmware first path. Firmware may leave
>> > + * the Root Port in SBR and it is the OS responsiblity to bring it out
>> > + * of SBR.
>> > + */
>> > +static pci_ers_result_t default_ff_root_port_reset_link(struct pci_dev *dev)
>> > +{
>> > +   u16 p2p_ctrl;
>> > +
>> > +   /* Read Secondary Bus Reset */
>> > +   pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &p2p_ctrl);
>> > +
>> > +   /* De-assert Secondary Bus Reset, if it is set */
>> > +   if (p2p_ctrl & PCI_BRIDGE_CTL_BUS_RESET) {
>> > +           p2p_ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
>> > +           pci_write_config_word(dev, PCI_BRIDGE_CONTROL, p2p_ctrl);
>> > +
>> > +           /*
>> > +            * System software must wait for at least 100ms from the end
>> > +            * of a reset of one or more device before it is permitted
>> > +            * to issue Configuration Requests to those devices.
>> > +            */
>> > +           msleep(200);
>> > +           dev_dbg(&dev->dev, "Root Port link has been reset\n");
>> > +   }
>> > +   return PCI_ERS_RESULT_RECOVERED;
>> > +}
>>
>> I don't think this function is OK.
>> 1) You don't really reset the 2nd Bus but just checking its status.
>> I think you should have following steps to reset 2nd Bus:
>>
>> a. Assert 2nd Bus Reset
>> b. wait for some time until this message has been broadcasted well
>> c. De-assert 2nd Bus Reset
>> d. wait for Trst time
>>
>> IOW, since we have aer_do_secondary_bus_reset to perform secondary bus
>> reset, why you repeat it again?
>>
>> 2) msleep(200) is too long for kernel. You'd better yield the CPU when
>> sleep.
>
> The firmware first path currently has no reset_link. I want to make a
> minimal change since resetting the link could be considered firmware's
> job in the firmware first path. This change is to just check if SBR is
> set, and bring the link out of reset only if it is in SBR.  This way, if
> a another firmware first platform is already resetting the link, it
> won't be done twice. I took the msleep and the code from
> aer_do_sercondary_bus_reset() as you noticed.

I understand the desire to make a minimal change, and we certainly
don't want to make changes bigger than they need to be.

However, my goal is really to have clean, maintainable code at the
end.  If that means bigger patches where you can't test every affected
platform, that's a risk I'm willing to take.

In this particular case, we could try to limit the change to just the
platforms you can test, as you've done.  But it looks to me like we
actually want to reset the link in *all* cases, regardless of whether
firmware-first is involved.  We're handling a fatal error for a
device.  That device might be below a PCIe switch (where we currently
reset the link), or it might be directly below a root port (where we
currently don't).  Why should those cases be different?  I don't think
the device or the driver should be able to tell the difference.

My *guess* is that this is an oversight in the original code, and that
doing the link reset for both downstream ports and root ports will
make error handling for devices below root ports work better.

The *last* thing I want is code littered with special cases that are
only there because "they only fix the platforms I could actually
test."  It's just about impossible to clean those up later.

Bjorn

>> > +
>> >  static int find_aer_service_iter(struct device *device, void *data)
>> >  {
>> >     struct pcie_port_service_driver *service_driver, **drv;
>> > @@ -460,6 +493,9 @@ static pci_ers_result_t reset_link(struct pci_dev *dev)
>> >             status = driver->reset_link(udev);
>> >     } else if (pci_pcie_type(udev) == PCI_EXP_TYPE_DOWNSTREAM) {
>> >             status = default_downstream_reset_link(udev);
>> > +   } else if (pci_pcie_type(udev) == PCI_EXP_TYPE_ROOT_PORT &&
>> > +           pcie_aer_get_firmware_first(udev)) {
>> > +           status = default_ff_root_port_reset_link(udev);
>> >     } else {
>> >             dev_printk(KERN_DEBUG, &dev->dev,
>> >                     "no link-reset support at upstream device %s\n",
>> > --
>> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>> > the body of a message to majordomo@xxxxxxxxxxxxxxx
>> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
>> > Please read the FAQ at  http://www.tux.org/lkml/
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux