Hi Shane, On Fri, 31 May 2013 19:22:13 +0800, Shane Huang wrote: > To add AMD CZ SMBus controller device ID. > > Signed-off-by: Shane Huang <shane.huang@xxxxxxx> > --- > Documentation/i2c/busses/i2c-piix4 | 2 +- > drivers/i2c/busses/Kconfig | 3 ++- > drivers/i2c/busses/i2c-piix4.c | 3 ++- > include/linux/pci_ids.h | 1 + > 4 files changed, 6 insertions(+), 3 deletions(-) > > diff --git a/Documentation/i2c/busses/i2c-piix4 b/Documentation/i2c/busses/i2c-piix4 > index 1e6634f..c136148 100644 > --- a/Documentation/i2c/busses/i2c-piix4 > +++ b/Documentation/i2c/busses/i2c-piix4 > @@ -13,7 +13,7 @@ Supported adapters: > * AMD SP5100 (SB700 derivative found on some server mainboards) > Datasheet: Publicly available at the AMD website > http://support.amd.com/us/Embedded_TechDocs/44413.pdf > - * AMD Hudson-2 > + * AMD HUDSON-2, CZ > Datasheet: Not publicly available > * Standard Microsystems (SMSC) SLC90E66 (Victory66) southbridge > Datasheet: Publicly available at the SMSC website http://www.smsc.com > diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig > index 631736e..a43086d 100644 > --- a/drivers/i2c/busses/Kconfig > +++ b/drivers/i2c/busses/Kconfig > @@ -149,7 +149,8 @@ config I2C_PIIX4 > ATI SB600 > ATI SB700/SP5100 > ATI SB800 > - AMD Hudson-2 > + AMD HUDSON-2 Please don't change the case. This makes your patch larger and increases the risk of conflict with other patches, for no good reason. Other than that, the patch looks OK. > + AMD CZ > Serverworks OSB4 > Serverworks CSB5 > Serverworks CSB6 > diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c > index 39ab78c..16a4d89 100644 > --- a/drivers/i2c/busses/i2c-piix4.c > +++ b/drivers/i2c/busses/i2c-piix4.c > @@ -22,7 +22,7 @@ > Intel PIIX4, 440MX > Serverworks OSB4, CSB5, CSB6, HT-1000, HT-1100 > ATI IXP200, IXP300, IXP400, SB600, SB700/SP5100, SB800 > - AMD Hudson-2 > + AMD HUDSON-2, CZ > SMSC Victory66 > > Note: we assume there can only be one device, with one or more > @@ -522,6 +522,7 @@ static DEFINE_PCI_DEVICE_TABLE(piix4_ids) = { > { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS) }, > { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS) }, > { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) }, > + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CZ_SMBUS) }, > { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, > PCI_DEVICE_ID_SERVERWORKS_OSB4) }, > { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, > diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h > index 22449c1..b10a5b4 100644 > --- a/include/linux/pci_ids.h > +++ b/include/linux/pci_ids.h > @@ -571,6 +571,7 @@ > #define PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE 0x7800 > #define PCI_DEVICE_ID_AMD_HUDSON2_SMBUS 0x780b > #define PCI_DEVICE_ID_AMD_CZ_SATA_IDE 0x7900 > +#define PCI_DEVICE_ID_AMD_CZ_SMBUS 0x790b > > #define PCI_VENDOR_ID_TRIDENT 0x1023 > #define PCI_DEVICE_ID_TRIDENT_4DWAVE_DX 0x2000 -- Jean Delvare -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
