When sriov is enabled, VF could just start after PF in pci tree. like c1:00.0 will be PF, and c1:00.1 and after will be VF. acpi do have dev with same ADR. that will make them get glued wrongly. Skip that if it is virtfn. Also need to set is_virtfn before pci_device_add(), as gluing is triggered by device_add(). Signed-off-by: Yinghai Lu <yinghai@xxxxxxxxxx> --- drivers/pci/iov.c | 6 +++--- drivers/pci/pci-acpi.c | 4 ++++ 2 files changed, 7 insertions(+), 3 deletions(-) Index: linux-2.6/drivers/pci/iov.c =================================================================== --- linux-2.6.orig/drivers/pci/iov.c +++ linux-2.6/drivers/pci/iov.c @@ -110,12 +110,12 @@ static int virtfn_add(struct pci_dev *de if (reset) __pci_reset_function(virtfn); - pci_device_add(virtfn, virtfn->bus); - mutex_unlock(&iov->dev->sriov->lock); - virtfn->physfn = pci_dev_get(dev); virtfn->is_virtfn = 1; + pci_device_add(virtfn, virtfn->bus); + mutex_unlock(&iov->dev->sriov->lock); + rc = pci_bus_add_device(virtfn); sprintf(buf, "virtfn%u", id); rc = sysfs_create_link(&dev->dev.kobj, &virtfn->dev.kobj, buf); Index: linux-2.6/drivers/pci/pci-acpi.c =================================================================== --- linux-2.6.orig/drivers/pci/pci-acpi.c +++ linux-2.6/drivers/pci/pci-acpi.c @@ -321,6 +321,10 @@ static int acpi_pci_find_device(struct d u64 addr; pci_dev = to_pci_dev(dev); + /* don't mix vf with real pci device */ + if (pci_dev->is_virtfn) + return -ENODEV; + /* Please ref to ACPI spec for the syntax of _ADR */ addr = (PCI_SLOT(pci_dev->devfn) << 16) | PCI_FUNC(pci_dev->devfn); *handle = acpi_get_child(DEVICE_ACPI_HANDLE(dev->parent), addr); -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html