Current we enable bridges after bus scan and assign resources.
and it is spreaded a lot of places.
We can move it to where pci device is enabled, and need
to go up to root bus and enable bridge one by one down to pci
dev.
So that will delay enable bridge late as needed bassis,
also kill one inconsistent between boot path and hotplug
path in acpi_pci_root_add().
Signed-off-by: Yinghai Lu <yinghai@xxxxxxxxxx>
---
arch/arm/kernel/bios32.c | 5 -----
arch/m68k/platform/coldfire/pci.c | 1 -
arch/mips/pci/pci.c | 1 -
arch/sh/drivers/pci/pci.c | 1 -
drivers/acpi/pci_root.c | 4 ----
drivers/parisc/lba_pci.c | 1 -
drivers/pci/bus.c | 19 -------------------
drivers/pci/hotplug/acpiphp_glue.c | 1 -
drivers/pci/pci.c | 20 ++++++++++++++++++++
drivers/pci/probe.c | 1 -
drivers/pci/setup-bus.c | 10 +++-------
drivers/pcmcia/cardbus.c | 1 -
include/linux/pci.h | 1 -
13 files changed, 23 insertions(+), 43 deletions(-)
Index: linux-2.6/arch/arm/kernel/bios32.c
===================================================================
--- linux-2.6.orig/arch/arm/kernel/bios32.c
+++ linux-2.6/arch/arm/kernel/bios32.c
@@ -524,11 +524,6 @@ void pci_common_init(struct hw_pci *hw)
* Assign resources.
*/
pci_bus_assign_resources(bus);
-
- /*
- * Enable bridges
- */
- pci_enable_bridges(bus);
}
/*
Index: linux-2.6/arch/m68k/platform/coldfire/pci.c
===================================================================
--- linux-2.6.orig/arch/m68k/platform/coldfire/pci.c
+++ linux-2.6/arch/m68k/platform/coldfire/pci.c
@@ -319,7 +319,6 @@ static int __init mcf_pci_init(void)
pci_fixup_irqs(pci_common_swizzle, mcf_pci_map_irq);
pci_bus_size_bridges(rootbus);
pci_bus_assign_resources(rootbus);
- pci_enable_bridges(rootbus);
pci_bus_add_devices(rootbus);
return 0;
}
Index: linux-2.6/arch/mips/pci/pci.c
===================================================================
--- linux-2.6.orig/arch/mips/pci/pci.c
+++ linux-2.6/arch/mips/pci/pci.c
@@ -113,7 +113,6 @@ static void pcibios_scanbus(struct pci_c
if (!pci_has_flag(PCI_PROBE_ONLY)) {
pci_bus_size_bridges(bus);
pci_bus_assign_resources(bus);
- pci_enable_bridges(bus);
}
}
}
Index: linux-2.6/arch/sh/drivers/pci/pci.c
===================================================================
--- linux-2.6.orig/arch/sh/drivers/pci/pci.c
+++ linux-2.6/arch/sh/drivers/pci/pci.c
@@ -69,7 +69,6 @@ static void pcibios_scanbus(struct pci_c
pci_bus_size_bridges(bus);
pci_bus_assign_resources(bus);
- pci_enable_bridges(bus);
} else {
pci_free_resource_list(&resources);
}
Index: linux-2.6/drivers/acpi/pci_root.c
===================================================================
--- linux-2.6.orig/drivers/acpi/pci_root.c
+++ linux-2.6/drivers/acpi/pci_root.c
@@ -538,10 +538,6 @@ static int acpi_pci_root_add(struct acpi
pci_assign_unassigned_bus_resources(root->bus);
}
- /* need to after hot-added ioapic is registered */
- if (system_state != SYSTEM_BOOTING)
- pci_enable_bridges(root->bus);
-
pci_bus_add_devices(root->bus);
return 1;
Index: linux-2.6/drivers/parisc/lba_pci.c
===================================================================
--- linux-2.6.orig/drivers/parisc/lba_pci.c
+++ linux-2.6/drivers/parisc/lba_pci.c
@@ -1533,7 +1533,6 @@ lba_driver_probe(struct parisc_device *d
lba_dump_res(&lba_dev->hba.lmmio_space, 2);
#endif
}
- pci_enable_bridges(lba_bus);
/*
** Once PCI register ops has walked the bus, access to config
Index: linux-2.6/drivers/pci/bus.c
===================================================================
--- linux-2.6.orig/drivers/pci/bus.c
+++ linux-2.6/drivers/pci/bus.c
@@ -215,24 +215,6 @@ void pci_bus_add_devices(const struct pc
}
}
-void pci_enable_bridges(struct pci_bus *bus)
-{
- struct pci_dev *dev;
- int retval;
-
- list_for_each_entry(dev, &bus->devices, bus_list) {
- if (dev->subordinate) {
- if (!pci_is_enabled(dev)) {
- retval = pci_enable_device(dev);
- if (retval)
- dev_err(&dev->dev, "Error enabling bridge (%d), continuing\n", retval);
- pci_set_master(dev);
- }
- pci_enable_bridges(dev->subordinate);
- }
- }
-}
-
/** pci_walk_bus - walk devices on/under bus, calling callback.
* @top bus whose devices should be walked
* @cb callback to be called for each device found
@@ -285,4 +267,3 @@ EXPORT_SYMBOL_GPL(pci_walk_bus);
EXPORT_SYMBOL(pci_bus_alloc_resource);
EXPORT_SYMBOL_GPL(pci_bus_add_device);
EXPORT_SYMBOL(pci_bus_add_devices);
-EXPORT_SYMBOL(pci_enable_bridges);
Index: linux-2.6/drivers/pci/hotplug/acpiphp_glue.c
===================================================================
--- linux-2.6.orig/drivers/pci/hotplug/acpiphp_glue.c
+++ linux-2.6/drivers/pci/hotplug/acpiphp_glue.c
@@ -704,7 +704,6 @@ static int __ref enable_device(struct ac
acpiphp_sanitize_bus(bus);
acpiphp_set_hpp_values(bus);
acpiphp_set_acpi_region(slot);
- pci_enable_bridges(bus);
list_for_each_entry(dev, &bus->devices, bus_list) {
/* Assume that newly added devices are powered on already. */
Index: linux-2.6/drivers/pci/pci.c
===================================================================
--- linux-2.6.orig/drivers/pci/pci.c
+++ linux-2.6/drivers/pci/pci.c
@@ -1145,6 +1145,24 @@ int pci_reenable_device(struct pci_dev *
return 0;
}
+static void pci_enable_bridge(struct pci_dev *dev)
+{
+ int retval;
+
+ if (!dev)
+ return;
+
+ pci_enable_bridge(dev->bus->self);
+
+ if (pci_is_enabled(dev))
+ return;
+ retval = pci_enable_device(dev);
+ if (retval)
+ dev_err(&dev->dev, "Error enabling bridge (%d), continuing\n",
+ retval);
+ pci_set_master(dev);
+}
+
static int pci_enable_device_flags(struct pci_dev *dev, unsigned long flags)
{
int err;
@@ -1165,6 +1183,8 @@ static int pci_enable_device_flags(struc
if (atomic_inc_return(&dev->enable_cnt) > 1)
return 0; /* already enabled */
+ pci_enable_bridge(dev->bus->self);
+
/* only skip sriov related */
for (i = 0; i <= PCI_ROM_RESOURCE; i++)
if (dev->resource[i].flags & flags)
Index: linux-2.6/drivers/pci/probe.c
===================================================================
--- linux-2.6.orig/drivers/pci/probe.c
+++ linux-2.6/drivers/pci/probe.c
@@ -1949,7 +1949,6 @@ unsigned int __ref pci_rescan_bus(struct
max = pci_scan_child_bus(bus);
pci_assign_unassigned_bus_resources(bus);
- pci_enable_bridges(bus);
pci_bus_add_devices(bus);
return max;
Index: linux-2.6/drivers/pci/setup-bus.c
===================================================================
--- linux-2.6.orig/drivers/pci/setup-bus.c
+++ linux-2.6/drivers/pci/setup-bus.c
@@ -1489,7 +1489,7 @@ again:
/* any device complain? */
if (list_empty(&fail_head))
- goto enable_and_dump;
+ goto dump;
if (tried_times >= pci_try_num) {
if (enable_local == undefined)
@@ -1498,7 +1498,7 @@ again:
dev_info(&bus->dev, "Automatically enabled pci realloc, if you have problem, try booting with pci=realloc=off\n");
free_list(&fail_head);
- goto enable_and_dump;
+ goto dump;
}
dev_printk(KERN_DEBUG, &bus->dev,
@@ -1531,10 +1531,7 @@ again:
goto again;
-enable_and_dump:
- /* Depth last, update the hardware. */
- pci_enable_bridges(bus);
-
+dump:
/* dump the resource on buses */
pci_bus_dump_resources(bus);
}
@@ -1610,7 +1607,6 @@ enable_all:
if (retval)
dev_err(&bridge->dev, "Error reenabling bridge (%d)\n", retval);
pci_set_master(bridge);
- pci_enable_bridges(parent);
}
EXPORT_SYMBOL_GPL(pci_assign_unassigned_bridge_resources);
Index: linux-2.6/drivers/pcmcia/cardbus.c
===================================================================
--- linux-2.6.orig/drivers/pcmcia/cardbus.c
+++ linux-2.6/drivers/pcmcia/cardbus.c
@@ -91,7 +91,6 @@ int __ref cb_alloc(struct pcmcia_socket
if (s->tune_bridge)
s->tune_bridge(s, bus);
- pci_enable_bridges(bus);
pci_bus_add_devices(bus);
return 0;
Index: linux-2.6/include/linux/pci.h
===================================================================
--- linux-2.6.orig/include/linux/pci.h
+++ linux-2.6/include/linux/pci.h
@@ -1040,7 +1040,6 @@ int __must_check pci_bus_alloc_resource(
resource_size_t,
resource_size_t),
void *alignf_data);
-void pci_enable_bridges(struct pci_bus *bus);
/* Proper probing supporting hot-pluggable devices */
int __must_check __pci_register_driver(struct pci_driver *, struct module *,
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
