On Sat, Apr 27, 2013 at 4:10 AM, Artem S. Tashkinov <t.artem@xxxxxxxxx> wrote: >> >>Did this problem ever get resolved? >> > > Hello, > > Unfortunately, no. Out of curiosity I've tried booting kernel > 3.9-rc8 in EUFI mode but it exhibits the same problem. > > Right after the boot: > > [root@localhost ~]# dd if=/dev/zero of=test bs=64M count=3 > 3+0 records in > 3+0 records out > 201326592 bytes (201 MB) copied, 1.08544 s, 185 MB/s > > After suspend/resume: > > # dd if=/dev/zero of=test bs=64M count=3 > 3+0 records in > 3+0 records out > 201326592 bytes (201 MB) copied, 66.5392 s, 3.0 MB/s > > That's for my primary SATA-3 HDD. > > Forgive me my impudence but I believe debugging the USB stack is > tangential to this problem. Something far deeper than USB support > breaks, but so far no one has come even with the slightest clue of > what that might be. I tend to agree that it sounds like something deeper than USB is broken. I admit I'm just grasping at straws because I don't have any good ideas yet. Here are three easy things you can try: 1) Collect "lspci -vvv -xxxx" output before and after the suspend/resume to investigate the XHCI Unsupported Request errors. 2) Collect the contents of /proc/mtrr before and after the suspend/resume. 3) After the suspend/resume, try the "setpci" to set the MSI address back to the original value to see if it makes a difference (see my Feb 12 message). Bjorn -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html