On Thu, Apr 11, 2013 at 11:32 AM, Gabor Juhos <juhosg@xxxxxxxxxxx> wrote: > 2013.04.10. 18:31 keltezéssel, Bjorn Helgaas írta: >> On Thu, Apr 4, 2013 at 12:01 PM, Gabor Juhos <juhosg@xxxxxxxxxxx> wrote: >>> The of_node field of the device assigned to a >>> PCI bus is used during scanning of the PCI bus. >>> However on MIPS, the of_node field is assigned >>> only after the bus has been scanned. >>> >>> Implement the architecture specific version of >>> 'pcibios_get_phb_of_node'. Which ensures that the >>> PCI driver core will initialize the of_node field >>> before starting the scan. >>> >>> Also remove the local assignment of bus->dev.of_node, >>> it is not needed after the patch. >>> >>> Signed-off-by: Gabor Juhos <juhosg@xxxxxxxxxxx> >> >> I removed the __weak annotation from include/linux/pci.h and applied >> this patch to my pci/gabor-get-of-node. > > Thank you! > >> Give it a try and make sure >> it solves your problem. If so, and Ralph approves, I can push both >> for v3.10. It should appear at >> http://git.kernel.org/cgit/linux/kernel/git/helgaas/pci.git/log/?h=pci/gabor-get-of-node >> soon. > > I have tried your patch on top of 3.9-rc6. The resulting kernel uses the > architecture specific implementation, and it runs fine. > > $ mipsel-openwrt-linux-readelf -s arch/mips/pci/built-in.o \ > drivers/pci/built-in.o vmlinux.o | grep pcibios_get_phb_of_node > 93: 0000046c 12 FUNC GLOBAL DEFAULT 2 pcibios_get_phb_of_node > 1433: 00012a2c 104 FUNC WEAK DEFAULT 2 pcibios_get_phb_of_node > 31863: 001d4dbc 12 FUNC GLOBAL DEFAULT 2 pcibios_get_phb_of_node > $ > > For completeness, I have compiled it for X64 and for powerpc as well. I did not > try to run these kernels, but the output of readelf seems to be ok: > > $ readelf -s arch/x86/kernel/built-in.o drivers/pci/built-in.o vmlinux.o | \ > grep pcibios_get_phb_of_node > 2761: 000273a0 86 FUNC GLOBAL DEFAULT 1 pcibios_get_phb_of_node > 1705: 00018770 77 FUNC WEAK DEFAULT 1 pcibios_get_phb_of_node > 60364: 000278a0 86 FUNC GLOBAL DEFAULT 1 pcibios_get_phb_of_node > $ > > $ powerpc-openwrt-linux-readelf -s arch/powerpc/kernel/built-in.o \ > drivers/pci/built-in.o vmlinux.o | grep pcibios_get_phb_of_node > 1002: 0000ca28 12 FUNC GLOBAL DEFAULT 1 pcibios_get_phb_of_node > 1485: 0001453c 88 FUNC WEAK DEFAULT 1 pcibios_get_phb_of_node > 28959: 0000d598 12 FUNC GLOBAL DEFAULT 1 pcibios_get_phb_of_node > $ > >> Or if you prefer, you can take them through the MIPS tree. > > Either is fine. Thanks for checking these out! I put them in my "next" branch and pushed it, so they should appear in v3.10. Bjorn -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
