Re: [PATCH v3] of/pci: Provide support for parsing PCI DT ranges property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Adding PPC and Microblaze maintainers.

On 04/08/2013 09:33 AM, Andrew Murray wrote:
> This patch factors out common implementation patterns to reduce overall kernel
> code and provide a means for host bridge drivers to directly obtain struct
> resources from the DT's ranges property without relying on architecture specific
> DT handling. This will make it easier to write archiecture independent host bridge
> drivers and mitigate against further duplication of DT parsing code.
> 
> This patch can be used in the following way:
> 
> 	struct of_pci_range_parser parser;
> 	struct of_pci_range range;
> 
> 	if (of_pci_range_parser(&parser, np))
> 		; //no ranges property
> 
> 	for_each_of_pci_range(&parser, &range) {
> 
> 		/*
> 			directly access properties of the address range, e.g.:
> 			range.pci_space, range.pci_addr, range.cpu_addr,
> 			range.size, range.flags
> 
> 			alternatively obtain a struct resource, e.g.:
> 			struct resource res;
> 			of_pci_range_to_resource(&range, np, &res);
> 		*/
> 	}
> 
> Additionally the implementation takes care of adjacent ranges and merges them
> into a single range (as was the case with powerpc and microblaze).
> 
> The modifications to microblaze, mips and powerpc have not been tested.
> 
> Signed-off-by: Andrew Murray <Andrew.Murray@xxxxxxx>
> Signed-off-by: Liviu Dudau <Liviu.Dudau@xxxxxxx>
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
> ---
> Compared to the v3 sent by Andrew Murray, the following changes have
> been made:
> 
>  * Unify and move duplicate pci_process_bridge_OF_ranges functions to
>    drivers/of/of_pci.c as suggested by Rob Herring

This part should really be a separate patch with just the move and
should have acks from PPC and Microblaze maintainers.

Otherwise it looks okay to me.

Rob

>  * Fix potential build errors with Microblaze/MIPS
> 
> Compared to "[PATCH v5 01/17] of/pci: Provide support for parsing PCI DT
> ranges property", the following changes have been made:
> 
>  * Correct use of IORESOURCE_* as suggested by Russell King
> 
>  * Improved interface and naming as suggested by Thierry Reding
> 
> Compared to the v2 sent by Andrew Murray, Thomas Petazzoni did:
> 
>  * Add a memset() on the struct of_pci_range_iter when starting the
>    for loop in for_each_pci_range(). Otherwise, with an uninitialized
>    of_pci_range_iter, of_pci_process_ranges() may crash.
> 
>  * Add parenthesis around 'res', 'np' and 'iter' in the
>    for_each_of_pci_range macro definitions. Otherwise, passing
>    something like &foobar as 'res' didn't work.
> 
>  * Rebased on top of 3.9-rc2, which required fixing a few conflicts in
>    the Microblaze code.
> 
> v2:
>   This follows on from suggestions made by Grant Likely
>   (marc.info/?l=linux-kernel&m=136079602806328)
> ---
>  arch/microblaze/include/asm/pci-bridge.h |    5 +-
>  arch/microblaze/pci/pci-common.c         |  192 ------------------------------
>  arch/mips/pci/pci.c                      |   50 +++------
>  arch/powerpc/include/asm/pci-bridge.h    |    5 +-
>  arch/powerpc/kernel/pci-common.c         |  192 ------------------------------
>  drivers/of/address.c                     |   63 ++++++++++
>  drivers/of/of_pci.c                      |  168 ++++++++++++++++++++++++++
>  include/linux/of_address.h               |   42 +++++++
>  include/linux/of_pci.h                   |    3 +
>  9 files changed, 294 insertions(+), 426 deletions(-)
> 
> diff --git a/arch/microblaze/include/asm/pci-bridge.h b/arch/microblaze/include/asm/pci-bridge.h
> index cb5d397..5783cd6 100644
> --- a/arch/microblaze/include/asm/pci-bridge.h
> +++ b/arch/microblaze/include/asm/pci-bridge.h
> @@ -10,6 +10,7 @@
>  #include <linux/pci.h>
>  #include <linux/list.h>
>  #include <linux/ioport.h>
> +#include <linux/of_pci.h>
>  
>  struct device_node;
>  
> @@ -132,10 +133,6 @@ extern void setup_indirect_pci(struct pci_controller *hose,
>  extern struct pci_controller *pci_find_hose_for_OF_device(
>  			struct device_node *node);
>  
> -/* Fill up host controller resources from the OF node */
> -extern void pci_process_bridge_OF_ranges(struct pci_controller *hose,
> -			struct device_node *dev, int primary);
> -
>  /* Allocate & free a PCI host bridge structure */
>  extern struct pci_controller *pcibios_alloc_controller(struct device_node *dev);
>  extern void pcibios_free_controller(struct pci_controller *phb);
> diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c
> index 9ea521e..2735ad9 100644
> --- a/arch/microblaze/pci/pci-common.c
> +++ b/arch/microblaze/pci/pci-common.c
> @@ -622,198 +622,6 @@ void pci_resource_to_user(const struct pci_dev *dev, int bar,
>  	*end = rsrc->end - offset;
>  }
>  
> -/**
> - * pci_process_bridge_OF_ranges - Parse PCI bridge resources from device tree
> - * @hose: newly allocated pci_controller to be setup
> - * @dev: device node of the host bridge
> - * @primary: set if primary bus (32 bits only, soon to be deprecated)
> - *
> - * This function will parse the "ranges" property of a PCI host bridge device
> - * node and setup the resource mapping of a pci controller based on its
> - * content.
> - *
> - * Life would be boring if it wasn't for a few issues that we have to deal
> - * with here:
> - *
> - *   - We can only cope with one IO space range and up to 3 Memory space
> - *     ranges. However, some machines (thanks Apple !) tend to split their
> - *     space into lots of small contiguous ranges. So we have to coalesce.
> - *
> - *   - We can only cope with all memory ranges having the same offset
> - *     between CPU addresses and PCI addresses. Unfortunately, some bridges
> - *     are setup for a large 1:1 mapping along with a small "window" which
> - *     maps PCI address 0 to some arbitrary high address of the CPU space in
> - *     order to give access to the ISA memory hole.
> - *     The way out of here that I've chosen for now is to always set the
> - *     offset based on the first resource found, then override it if we
> - *     have a different offset and the previous was set by an ISA hole.
> - *
> - *   - Some busses have IO space not starting at 0, which causes trouble with
> - *     the way we do our IO resource renumbering. The code somewhat deals with
> - *     it for 64 bits but I would expect problems on 32 bits.
> - *
> - *   - Some 32 bits platforms such as 4xx can have physical space larger than
> - *     32 bits so we need to use 64 bits values for the parsing
> - */
> -void pci_process_bridge_OF_ranges(struct pci_controller *hose,
> -				  struct device_node *dev, int primary)
> -{
> -	const u32 *ranges;
> -	int rlen;
> -	int pna = of_n_addr_cells(dev);
> -	int np = pna + 5;
> -	int memno = 0, isa_hole = -1;
> -	u32 pci_space;
> -	unsigned long long pci_addr, cpu_addr, pci_next, cpu_next, size;
> -	unsigned long long isa_mb = 0;
> -	struct resource *res;
> -
> -	pr_info("PCI host bridge %s %s ranges:\n",
> -	       dev->full_name, primary ? "(primary)" : "");
> -
> -	/* Get ranges property */
> -	ranges = of_get_property(dev, "ranges", &rlen);
> -	if (ranges == NULL)
> -		return;
> -
> -	/* Parse it */
> -	pr_debug("Parsing ranges property...\n");
> -	while ((rlen -= np * 4) >= 0) {
> -		/* Read next ranges element */
> -		pci_space = ranges[0];
> -		pci_addr = of_read_number(ranges + 1, 2);
> -		cpu_addr = of_translate_address(dev, ranges + 3);
> -		size = of_read_number(ranges + pna + 3, 2);
> -
> -		pr_debug("pci_space: 0x%08x pci_addr:0x%016llx ",
> -				pci_space, pci_addr);
> -		pr_debug("cpu_addr:0x%016llx size:0x%016llx\n",
> -					cpu_addr, size);
> -
> -		ranges += np;
> -
> -		/* If we failed translation or got a zero-sized region
> -		 * (some FW try to feed us with non sensical zero sized regions
> -		 * such as power3 which look like some kind of attempt
> -		 * at exposing the VGA memory hole)
> -		 */
> -		if (cpu_addr == OF_BAD_ADDR || size == 0)
> -			continue;
> -
> -		/* Now consume following elements while they are contiguous */
> -		for (; rlen >= np * sizeof(u32);
> -		     ranges += np, rlen -= np * 4) {
> -			if (ranges[0] != pci_space)
> -				break;
> -			pci_next = of_read_number(ranges + 1, 2);
> -			cpu_next = of_translate_address(dev, ranges + 3);
> -			if (pci_next != pci_addr + size ||
> -			    cpu_next != cpu_addr + size)
> -				break;
> -			size += of_read_number(ranges + pna + 3, 2);
> -		}
> -
> -		/* Act based on address space type */
> -		res = NULL;
> -		switch ((pci_space >> 24) & 0x3) {
> -		case 1:		/* PCI IO space */
> -			pr_info("  IO 0x%016llx..0x%016llx -> 0x%016llx\n",
> -			       cpu_addr, cpu_addr + size - 1, pci_addr);
> -
> -			/* We support only one IO range */
> -			if (hose->pci_io_size) {
> -				pr_info(" \\--> Skipped (too many) !\n");
> -				continue;
> -			}
> -			/* On 32 bits, limit I/O space to 16MB */
> -			if (size > 0x01000000)
> -				size = 0x01000000;
> -
> -			/* 32 bits needs to map IOs here */
> -			hose->io_base_virt = ioremap(cpu_addr, size);
> -
> -			/* Expect trouble if pci_addr is not 0 */
> -			if (primary)
> -				isa_io_base =
> -					(unsigned long)hose->io_base_virt;
> -			/* pci_io_size and io_base_phys always represent IO
> -			 * space starting at 0 so we factor in pci_addr
> -			 */
> -			hose->pci_io_size = pci_addr + size;
> -			hose->io_base_phys = cpu_addr - pci_addr;
> -
> -			/* Build resource */
> -			res = &hose->io_resource;
> -			res->flags = IORESOURCE_IO;
> -			res->start = pci_addr;
> -			break;
> -		case 2:		/* PCI Memory space */
> -		case 3:		/* PCI 64 bits Memory space */
> -			pr_info(" MEM 0x%016llx..0x%016llx -> 0x%016llx %s\n",
> -			       cpu_addr, cpu_addr + size - 1, pci_addr,
> -			       (pci_space & 0x40000000) ? "Prefetch" : "");
> -
> -			/* We support only 3 memory ranges */
> -			if (memno >= 3) {
> -				pr_info(" \\--> Skipped (too many) !\n");
> -				continue;
> -			}
> -			/* Handles ISA memory hole space here */
> -			if (pci_addr == 0) {
> -				isa_mb = cpu_addr;
> -				isa_hole = memno;
> -				if (primary || isa_mem_base == 0)
> -					isa_mem_base = cpu_addr;
> -				hose->isa_mem_phys = cpu_addr;
> -				hose->isa_mem_size = size;
> -			}
> -
> -			/* We get the PCI/Mem offset from the first range or
> -			 * the, current one if the offset came from an ISA
> -			 * hole. If they don't match, bugger.
> -			 */
> -			if (memno == 0 ||
> -			    (isa_hole >= 0 && pci_addr != 0 &&
> -			     hose->pci_mem_offset == isa_mb))
> -				hose->pci_mem_offset = cpu_addr - pci_addr;
> -			else if (pci_addr != 0 &&
> -				 hose->pci_mem_offset != cpu_addr - pci_addr) {
> -				pr_info(" \\--> Skipped (offset mismatch) !\n");
> -				continue;
> -			}
> -
> -			/* Build resource */
> -			res = &hose->mem_resources[memno++];
> -			res->flags = IORESOURCE_MEM;
> -			if (pci_space & 0x40000000)
> -				res->flags |= IORESOURCE_PREFETCH;
> -			res->start = cpu_addr;
> -			break;
> -		}
> -		if (res != NULL) {
> -			res->name = dev->full_name;
> -			res->end = res->start + size - 1;
> -			res->parent = NULL;
> -			res->sibling = NULL;
> -			res->child = NULL;
> -		}
> -	}
> -
> -	/* If there's an ISA hole and the pci_mem_offset is -not- matching
> -	 * the ISA hole offset, then we need to remove the ISA hole from
> -	 * the resource list for that brige
> -	 */
> -	if (isa_hole >= 0 && hose->pci_mem_offset != isa_mb) {
> -		unsigned int next = isa_hole + 1;
> -		pr_info(" Removing ISA hole at 0x%016llx\n", isa_mb);
> -		if (next < memno)
> -			memmove(&hose->mem_resources[isa_hole],
> -				&hose->mem_resources[next],
> -				sizeof(struct resource) * (memno - next));
> -		hose->mem_resources[--memno].flags = 0;
> -	}
> -}
> -
>  /* Decide whether to display the domain number in /proc */
>  int pci_proc_domain(struct pci_bus *bus)
>  {
> diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
> index 0872f12..bee49a4 100644
> --- a/arch/mips/pci/pci.c
> +++ b/arch/mips/pci/pci.c
> @@ -122,51 +122,33 @@ static void pcibios_scanbus(struct pci_controller *hose)
>  #ifdef CONFIG_OF
>  void pci_load_of_ranges(struct pci_controller *hose, struct device_node *node)
>  {
> -	const __be32 *ranges;
> -	int rlen;
> -	int pna = of_n_addr_cells(node);
> -	int np = pna + 5;
> +	struct of_pci_range_range range;
> +	struct of_pci_range_parser parser;
> +	u32 res_type;
>  
>  	pr_info("PCI host bridge %s ranges:\n", node->full_name);
> -	ranges = of_get_property(node, "ranges", &rlen);
> -	if (ranges == NULL)
> -		return;
>  	hose->of_node = node;
>  
> -	while ((rlen -= np * 4) >= 0) {
> -		u32 pci_space;
> +	if (of_pci_range_parser(&parser, node))
> +		return;
> +
> +	for_each_of_pci_range(&parser, &range) {
>  		struct resource *res = NULL;
> -		u64 addr, size;
> -
> -		pci_space = be32_to_cpup(&ranges[0]);
> -		addr = of_translate_address(node, ranges + 3);
> -		size = of_read_number(ranges + pna + 3, 2);
> -		ranges += np;
> -		switch ((pci_space >> 24) & 0x3) {
> -		case 1:		/* PCI IO space */
> +
> +		res_type = range.flags & IORESOURCE_TYPE_BITS;
> +		if (res_type == IORESOURCE_IO) {
>  			pr_info("  IO 0x%016llx..0x%016llx\n",
> -					addr, addr + size - 1);
> +				range.addr, range.addr + range.size - 1);
>  			hose->io_map_base =
> -				(unsigned long)ioremap(addr, size);
> +				(unsigned long)ioremap(range.addr, range.size);
>  			res = hose->io_resource;
> -			res->flags = IORESOURCE_IO;
> -			break;
> -		case 2:		/* PCI Memory space */
> -		case 3:		/* PCI 64 bits Memory space */
> +		} else if (res_type == IORESOURCE_MEM) {
>  			pr_info(" MEM 0x%016llx..0x%016llx\n",
> -					addr, addr + size - 1);
> +				range.addr, range.addr + range.size - 1);
>  			res = hose->mem_resource;
> -			res->flags = IORESOURCE_MEM;
> -			break;
> -		}
> -		if (res != NULL) {
> -			res->start = addr;
> -			res->name = node->full_name;
> -			res->end = res->start + size - 1;
> -			res->parent = NULL;
> -			res->sibling = NULL;
> -			res->child = NULL;
>  		}
> +		if (res != NULL)
> +			of_pci_range_to_resource(&range, node, res);
>  	}
>  }
>  #endif
> diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
> index 025a130..205bfba 100644
> --- a/arch/powerpc/include/asm/pci-bridge.h
> +++ b/arch/powerpc/include/asm/pci-bridge.h
> @@ -10,6 +10,7 @@
>  #include <linux/pci.h>
>  #include <linux/list.h>
>  #include <linux/ioport.h>
> +#include <linux/of_pci.h>
>  #include <asm-generic/pci-bridge.h>
>  
>  struct device_node;
> @@ -231,10 +232,6 @@ extern int pcibios_map_io_space(struct pci_bus *bus);
>  extern struct pci_controller *pci_find_hose_for_OF_device(
>  			struct device_node* node);
>  
> -/* Fill up host controller resources from the OF node */
> -extern void pci_process_bridge_OF_ranges(struct pci_controller *hose,
> -			struct device_node *dev, int primary);
> -
>  /* Allocate & free a PCI host bridge structure */
>  extern struct pci_controller *pcibios_alloc_controller(struct device_node *dev);
>  extern void pcibios_free_controller(struct pci_controller *phb);
> diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
> index fa12ae4..6edf396 100644
> --- a/arch/powerpc/kernel/pci-common.c
> +++ b/arch/powerpc/kernel/pci-common.c
> @@ -640,198 +640,6 @@ void pci_resource_to_user(const struct pci_dev *dev, int bar,
>  	*end = rsrc->end - offset;
>  }
>  
> -/**
> - * pci_process_bridge_OF_ranges - Parse PCI bridge resources from device tree
> - * @hose: newly allocated pci_controller to be setup
> - * @dev: device node of the host bridge
> - * @primary: set if primary bus (32 bits only, soon to be deprecated)
> - *
> - * This function will parse the "ranges" property of a PCI host bridge device
> - * node and setup the resource mapping of a pci controller based on its
> - * content.
> - *
> - * Life would be boring if it wasn't for a few issues that we have to deal
> - * with here:
> - *
> - *   - We can only cope with one IO space range and up to 3 Memory space
> - *     ranges. However, some machines (thanks Apple !) tend to split their
> - *     space into lots of small contiguous ranges. So we have to coalesce.
> - *
> - *   - We can only cope with all memory ranges having the same offset
> - *     between CPU addresses and PCI addresses. Unfortunately, some bridges
> - *     are setup for a large 1:1 mapping along with a small "window" which
> - *     maps PCI address 0 to some arbitrary high address of the CPU space in
> - *     order to give access to the ISA memory hole.
> - *     The way out of here that I've chosen for now is to always set the
> - *     offset based on the first resource found, then override it if we
> - *     have a different offset and the previous was set by an ISA hole.
> - *
> - *   - Some busses have IO space not starting at 0, which causes trouble with
> - *     the way we do our IO resource renumbering. The code somewhat deals with
> - *     it for 64 bits but I would expect problems on 32 bits.
> - *
> - *   - Some 32 bits platforms such as 4xx can have physical space larger than
> - *     32 bits so we need to use 64 bits values for the parsing
> - */
> -void pci_process_bridge_OF_ranges(struct pci_controller *hose,
> -				  struct device_node *dev, int primary)
> -{
> -	const u32 *ranges;
> -	int rlen;
> -	int pna = of_n_addr_cells(dev);
> -	int np = pna + 5;
> -	int memno = 0, isa_hole = -1;
> -	u32 pci_space;
> -	unsigned long long pci_addr, cpu_addr, pci_next, cpu_next, size;
> -	unsigned long long isa_mb = 0;
> -	struct resource *res;
> -
> -	printk(KERN_INFO "PCI host bridge %s %s ranges:\n",
> -	       dev->full_name, primary ? "(primary)" : "");
> -
> -	/* Get ranges property */
> -	ranges = of_get_property(dev, "ranges", &rlen);
> -	if (ranges == NULL)
> -		return;
> -
> -	/* Parse it */
> -	while ((rlen -= np * 4) >= 0) {
> -		/* Read next ranges element */
> -		pci_space = ranges[0];
> -		pci_addr = of_read_number(ranges + 1, 2);
> -		cpu_addr = of_translate_address(dev, ranges + 3);
> -		size = of_read_number(ranges + pna + 3, 2);
> -		ranges += np;
> -
> -		/* If we failed translation or got a zero-sized region
> -		 * (some FW try to feed us with non sensical zero sized regions
> -		 * such as power3 which look like some kind of attempt at exposing
> -		 * the VGA memory hole)
> -		 */
> -		if (cpu_addr == OF_BAD_ADDR || size == 0)
> -			continue;
> -
> -		/* Now consume following elements while they are contiguous */
> -		for (; rlen >= np * sizeof(u32);
> -		     ranges += np, rlen -= np * 4) {
> -			if (ranges[0] != pci_space)
> -				break;
> -			pci_next = of_read_number(ranges + 1, 2);
> -			cpu_next = of_translate_address(dev, ranges + 3);
> -			if (pci_next != pci_addr + size ||
> -			    cpu_next != cpu_addr + size)
> -				break;
> -			size += of_read_number(ranges + pna + 3, 2);
> -		}
> -
> -		/* Act based on address space type */
> -		res = NULL;
> -		switch ((pci_space >> 24) & 0x3) {
> -		case 1:		/* PCI IO space */
> -			printk(KERN_INFO
> -			       "  IO 0x%016llx..0x%016llx -> 0x%016llx\n",
> -			       cpu_addr, cpu_addr + size - 1, pci_addr);
> -
> -			/* We support only one IO range */
> -			if (hose->pci_io_size) {
> -				printk(KERN_INFO
> -				       " \\--> Skipped (too many) !\n");
> -				continue;
> -			}
> -#ifdef CONFIG_PPC32
> -			/* On 32 bits, limit I/O space to 16MB */
> -			if (size > 0x01000000)
> -				size = 0x01000000;
> -
> -			/* 32 bits needs to map IOs here */
> -			hose->io_base_virt = ioremap(cpu_addr, size);
> -
> -			/* Expect trouble if pci_addr is not 0 */
> -			if (primary)
> -				isa_io_base =
> -					(unsigned long)hose->io_base_virt;
> -#endif /* CONFIG_PPC32 */
> -			/* pci_io_size and io_base_phys always represent IO
> -			 * space starting at 0 so we factor in pci_addr
> -			 */
> -			hose->pci_io_size = pci_addr + size;
> -			hose->io_base_phys = cpu_addr - pci_addr;
> -
> -			/* Build resource */
> -			res = &hose->io_resource;
> -			res->flags = IORESOURCE_IO;
> -			res->start = pci_addr;
> -			break;
> -		case 2:		/* PCI Memory space */
> -		case 3:		/* PCI 64 bits Memory space */
> -			printk(KERN_INFO
> -			       " MEM 0x%016llx..0x%016llx -> 0x%016llx %s\n",
> -			       cpu_addr, cpu_addr + size - 1, pci_addr,
> -			       (pci_space & 0x40000000) ? "Prefetch" : "");
> -
> -			/* We support only 3 memory ranges */
> -			if (memno >= 3) {
> -				printk(KERN_INFO
> -				       " \\--> Skipped (too many) !\n");
> -				continue;
> -			}
> -			/* Handles ISA memory hole space here */
> -			if (pci_addr == 0) {
> -				isa_mb = cpu_addr;
> -				isa_hole = memno;
> -				if (primary || isa_mem_base == 0)
> -					isa_mem_base = cpu_addr;
> -				hose->isa_mem_phys = cpu_addr;
> -				hose->isa_mem_size = size;
> -			}
> -
> -			/* We get the PCI/Mem offset from the first range or
> -			 * the, current one if the offset came from an ISA
> -			 * hole. If they don't match, bugger.
> -			 */
> -			if (memno == 0 ||
> -			    (isa_hole >= 0 && pci_addr != 0 &&
> -			     hose->pci_mem_offset == isa_mb))
> -				hose->pci_mem_offset = cpu_addr - pci_addr;
> -			else if (pci_addr != 0 &&
> -				 hose->pci_mem_offset != cpu_addr - pci_addr) {
> -				printk(KERN_INFO
> -				       " \\--> Skipped (offset mismatch) !\n");
> -				continue;
> -			}
> -
> -			/* Build resource */
> -			res = &hose->mem_resources[memno++];
> -			res->flags = IORESOURCE_MEM;
> -			if (pci_space & 0x40000000)
> -				res->flags |= IORESOURCE_PREFETCH;
> -			res->start = cpu_addr;
> -			break;
> -		}
> -		if (res != NULL) {
> -			res->name = dev->full_name;
> -			res->end = res->start + size - 1;
> -			res->parent = NULL;
> -			res->sibling = NULL;
> -			res->child = NULL;
> -		}
> -	}
> -
> -	/* If there's an ISA hole and the pci_mem_offset is -not- matching
> -	 * the ISA hole offset, then we need to remove the ISA hole from
> -	 * the resource list for that brige
> -	 */
> -	if (isa_hole >= 0 && hose->pci_mem_offset != isa_mb) {
> -		unsigned int next = isa_hole + 1;
> -		printk(KERN_INFO " Removing ISA hole at 0x%016llx\n", isa_mb);
> -		if (next < memno)
> -			memmove(&hose->mem_resources[isa_hole],
> -				&hose->mem_resources[next],
> -				sizeof(struct resource) * (memno - next));
> -		hose->mem_resources[--memno].flags = 0;
> -	}
> -}
> -
>  /* Decide whether to display the domain number in /proc */
>  int pci_proc_domain(struct pci_bus *bus)
>  {
> diff --git a/drivers/of/address.c b/drivers/of/address.c
> index 04da786..e87f45e 100644
> --- a/drivers/of/address.c
> +++ b/drivers/of/address.c
> @@ -227,6 +227,69 @@ int of_pci_address_to_resource(struct device_node *dev, int bar,
>  	return __of_address_to_resource(dev, addrp, size, flags, NULL, r);
>  }
>  EXPORT_SYMBOL_GPL(of_pci_address_to_resource);
> +
> +int of_pci_range_parser(struct of_pci_range_parser *parser,
> +			struct device_node *node)
> +{
> +	const int na = 3, ns = 2;
> +	int rlen;
> +
> +	parser->node = node;
> +	parser->pna = of_n_addr_cells(node);
> +	parser->np = parser->pna + na + ns;
> +
> +	parser->range = of_get_property(node, "ranges", &rlen);
> +	if (parser->range == NULL)
> +		return -ENOENT;
> +
> +	parser->end = parser->range + rlen / sizeof(__be32);
> +
> +	return 0;
> +}
> +
> +struct of_pci_range *of_pci_process_ranges(struct of_pci_range_parser *parser,
> +						struct of_pci_range *range)
> +{
> +	const int na = 3, ns = 2;
> +
> +	if (!parser->range || parser->range + parser->np > parser->end)
> +		return NULL;
> +
> +	range->pci_space = be32_to_cpup(parser->range);
> +	range->flags = of_bus_pci_get_flags(parser->range);
> +	range->pci_addr = of_read_number(parser->range + 1, ns);
> +	range->cpu_addr = of_translate_address(parser->node,
> +				parser->range + na);
> +	range->size = of_read_number(parser->range + parser->pna + na, ns);
> +
> +	parser->range += parser->np;
> +
> +	/* Now consume following elements while they are contiguous */
> +	while (parser->range + parser->np <= parser->end) {
> +		u32 flags, pci_space;
> +		u64 pci_addr, cpu_addr, size;
> +
> +		pci_space = be32_to_cpup(parser->range);
> +		flags = of_bus_pci_get_flags(parser->range);
> +		pci_addr = of_read_number(parser->range + 1, ns);
> +		cpu_addr = of_translate_address(parser->node,
> +				parser->range + na);
> +		size = of_read_number(parser->range + parser->pna + na, ns);
> +
> +		if (flags != range->flags)
> +			break;
> +		if (pci_addr != range->pci_addr + range->size ||
> +		    cpu_addr != range->cpu_addr + range->size)
> +			break;
> +
> +		range->size += size;
> +		parser->range += parser->np;
> +	}
> +
> +	return range;
> +}
> +EXPORT_SYMBOL_GPL(of_pci_process_ranges);
> +
>  #endif /* CONFIG_PCI */
>  
>  /*
> diff --git a/drivers/of/of_pci.c b/drivers/of/of_pci.c
> index 13e37e2..f88bd18 100644
> --- a/drivers/of/of_pci.c
> +++ b/drivers/of/of_pci.c
> @@ -4,6 +4,10 @@
>  #include <linux/of_pci.h>
>  #include <asm/prom.h>
>  
> +#if defined(CONFIG_PPC32) || defined(CONFIG_PPC64) || defined(CONFIG_MICROBLAZE)
> +#include <asm/pci-bridge.h>
> +#endif
> +
>  static inline int __of_pci_pci_compare(struct device_node *node,
>  				       unsigned int devfn)
>  {
> @@ -40,3 +44,167 @@ struct device_node *of_pci_find_child_device(struct device_node *parent,
>  	return NULL;
>  }
>  EXPORT_SYMBOL_GPL(of_pci_find_child_device);
> +
> +/**
> + * pci_process_bridge_OF_ranges - Parse PCI bridge resources from device tree
> + * @hose: newly allocated pci_controller to be setup
> + * @dev: device node of the host bridge
> + * @primary: set if primary bus (32 bits only, soon to be deprecated)
> + *
> + * This function will parse the "ranges" property of a PCI host bridge device
> + * node and setup the resource mapping of a pci controller based on its
> + * content.
> + *
> + * Life would be boring if it wasn't for a few issues that we have to deal
> + * with here:
> + *
> + *   - We can only cope with one IO space range and up to 3 Memory space
> + *     ranges. However, some machines (thanks Apple !) tend to split their
> + *     space into lots of small contiguous ranges. So we have to coalesce.
> + *
> + *   - We can only cope with all memory ranges having the same offset
> + *     between CPU addresses and PCI addresses. Unfortunately, some bridges
> + *     are setup for a large 1:1 mapping along with a small "window" which
> + *     maps PCI address 0 to some arbitrary high address of the CPU space in
> + *     order to give access to the ISA memory hole.
> + *     The way out of here that I've chosen for now is to always set the
> + *     offset based on the first resource found, then override it if we
> + *     have a different offset and the previous was set by an ISA hole.
> + *
> + *   - Some busses have IO space not starting at 0, which causes trouble with
> + *     the way we do our IO resource renumbering. The code somewhat deals with
> + *     it for 64 bits but I would expect problems on 32 bits.
> + *
> + *   - Some 32 bits platforms such as 4xx can have physical space larger than
> + *     32 bits so we need to use 64 bits values for the parsing
> + */
> +#if defined(CONFIG_PPC32) || defined(CONFIG_PPC64) || defined(CONFIG_MICROBLAZE)
> +void pci_process_bridge_OF_ranges(struct pci_controller *hose,
> +				  struct device_node *dev, int primary)
> +{
> +	int memno = 0, isa_hole = -1;
> +	unsigned long long isa_mb = 0;
> +	struct resource *res;
> +	struct of_pci_range range;
> +	struct of_pci_range_parser parser;
> +	u32 res_type;
> +
> +	pr_info("PCI host bridge %s %s ranges:\n",
> +	       dev->full_name, primary ? "(primary)" : "");
> +
> +	/* Check for ranges property */
> +	if (of_pci_range_parser(&parser, dev))
> +		return;
> +
> +	pr_debug("Parsing ranges property...\n");
> +	for_each_of_pci_range(&parser, &range) {
> +		/* Read next ranges element */
> +		pr_debug("pci_space: 0x%08x pci_addr: 0x%016llx ",
> +				range.pci_space, range.pci_addr);
> +		pr_debug("cpu_addr: 0x%016llx size: 0x%016llx\n",
> +				range.cpu_addr, range.size);
> +
> +		/* If we failed translation or got a zero-sized region
> +		 * (some FW try to feed us with non sensical zero sized regions
> +		 * such as power3 which look like some kind of attempt at
> +		 * exposing the VGA memory hole)
> +		 */
> +		if (range.cpu_addr == OF_BAD_ADDR || range.size == 0)
> +			continue;
> +
> +		/* Act based on address space type */
> +		res = NULL;
> +		res_type = range.flags & IORESOURCE_TYPE_BITS;
> +		if (res_type == IORESOURCE_IO) {
> +			pr_info("  IO 0x%016llx..0x%016llx -> 0x%016llx\n",
> +				range.cpu_addr, range.cpu_addr + range.size - 1,
> +				range.pci_addr);
> +
> +			/* We support only one IO range */
> +			if (hose->pci_io_size) {
> +				pr_info(" \\--> Skipped (too many) !\n");
> +				continue;
> +			}
> +#if defined(CONFIG_PPC32) || defined(CONFIG_MICROBLAZE)
> +			/* On 32 bits, limit I/O space to 16MB */
> +			if (range.size > 0x01000000)
> +				range.size = 0x01000000;
> +
> +			/* 32 bits needs to map IOs here */
> +			hose->io_base_virt = ioremap(range.cpu_addr,
> +						range.size);
> +
> +			/* Expect trouble if pci_addr is not 0 */
> +			if (primary)
> +				isa_io_base =
> +					(unsigned long)hose->io_base_virt;
> +#endif /* CONFIG_PPC32 || CONFIG_MICROBLAZE */
> +			/* pci_io_size and io_base_phys always represent IO
> +			 * space starting at 0 so we factor in pci_addr
> +			 */
> +			hose->pci_io_size = range.pci_addr + range.size;
> +			hose->io_base_phys = range.cpu_addr - range.pci_addr;
> +
> +			/* Build resource */
> +			res = &hose->io_resource;
> +			range.cpu_addr = range.pci_addr;
> +		} else if (res_type == IORESOURCE_MEM) {
> +			pr_info(" MEM 0x%016llx..0x%016llx -> 0x%016llx %s\n",
> +				range.cpu_addr, range.cpu_addr + range.size - 1,
> +				range.pci_addr,
> +				(range.pci_space & 0x40000000) ?
> +				"Prefetch" : "");
> +
> +			/* We support only 3 memory ranges */
> +			if (memno >= 3) {
> +				pr_info(" \\--> Skipped (too many) !\n");
> +				continue;
> +			}
> +			/* Handles ISA memory hole space here */
> +			if (range.pci_addr == 0) {
> +				isa_mb = range.cpu_addr;
> +				isa_hole = memno;
> +				if (primary || isa_mem_base == 0)
> +					isa_mem_base = range.cpu_addr;
> +				hose->isa_mem_phys = range.cpu_addr;
> +				hose->isa_mem_size = range.size;
> +			}
> +
> +			/* We get the PCI/Mem offset from the first range or
> +			 * the, current one if the offset came from an ISA
> +			 * hole. If they don't match, bugger.
> +			 */
> +			if (memno == 0 ||
> +			(isa_hole >= 0 && range.pci_addr != 0 &&
> +			     hose->pci_mem_offset == isa_mb))
> +				hose->pci_mem_offset = range.cpu_addr -
> +							range.pci_addr;
> +			else if (range.pci_addr != 0 &&
> +				hose->pci_mem_offset != range.cpu_addr -
> +							range.pci_addr) {
> +				pr_info(" \\--> Skipped (offset mismatch) !\n");
> +				continue;
> +			}
> +
> +			/* Build resource */
> +			res = &hose->mem_resources[memno++];
> +		}
> +		if (res != NULL)
> +			of_pci_range_to_resource(&range, dev, res);
> +	}
> +
> +	/* If there's an ISA hole and the pci_mem_offset is -not- matching
> +	 * the ISA hole offset, then we need to remove the ISA hole from
> +	 * the resource list for that brige
> +	 */
> +	if (isa_hole >= 0 && hose->pci_mem_offset != isa_mb) {
> +		unsigned int next = isa_hole + 1;
> +		pr_info(" Removing ISA hole at 0x%016llx\n", isa_mb);
> +		if (next < memno)
> +			memmove(&hose->mem_resources[isa_hole],
> +				&hose->mem_resources[next],
> +				sizeof(struct resource) * (memno - next));
> +		hose->mem_resources[--memno].flags = 0;
> +	}
> +}
> +#endif
> diff --git a/include/linux/of_address.h b/include/linux/of_address.h
> index 0506eb5..c7003a3 100644
> --- a/include/linux/of_address.h
> +++ b/include/linux/of_address.h
> @@ -4,6 +4,32 @@
>  #include <linux/errno.h>
>  #include <linux/of.h>
>  
> +struct of_pci_range_parser {
> +	struct device_node *node;
> +	const __be32 *range, *end;
> +	int np, pna;
> +};
> +
> +struct of_pci_range {
> +	u32 pci_space;
> +	u64 pci_addr;
> +	u64 cpu_addr;
> +	u64 size;
> +	u32 flags;
> +};
> +
> +#define for_each_of_pci_range(parser, range) \
> +	for (; of_pci_process_ranges(parser, range);)
> +
> +#define of_pci_range_to_resource(range, np, res) \
> +	do { \
> +		(res)->flags = (range)->flags; \
> +		(res)->start = (range)->cpu_addr; \
> +		(res)->end = (range)->cpu_addr + (range)->size - 1; \
> +		(res)->parent = (res)->child = (res)->sibling = NULL; \
> +		(res)->name = (np)->full_name; \
> +	} while (0)
> +
>  #ifdef CONFIG_OF_ADDRESS
>  extern u64 of_translate_address(struct device_node *np, const __be32 *addr);
>  extern bool of_can_translate_address(struct device_node *dev);
> @@ -27,6 +53,10 @@ static inline unsigned long pci_address_to_pio(phys_addr_t addr) { return -1; }
>  #define pci_address_to_pio pci_address_to_pio
>  #endif
>  
> +int of_pci_range_parser(struct of_pci_range_parser *parser,
> +			struct device_node *node);
> +struct of_pci_range *of_pci_process_ranges(struct of_pci_range_parser *parser,
> +						struct of_pci_range *range);
>  #else /* CONFIG_OF_ADDRESS */
>  #ifndef of_address_to_resource
>  static inline int of_address_to_resource(struct device_node *dev, int index,
> @@ -53,6 +83,18 @@ static inline const __be32 *of_get_address(struct device_node *dev, int index,
>  {
>  	return NULL;
>  }
> +
> +int of_pci_range_parser(struct of_pci_range_parser *parser,
> +			struct device_noed *node)
> +{
> +	return -1;
> +}
> +
> +struct of_pci_range *of_pci_process_ranges(struct of_pci_range_parser *parser,
> +						struct of_pci_range *range)
> +{
> +	return NULL;
> +}
>  #endif /* CONFIG_OF_ADDRESS */
>  
>  
> diff --git a/include/linux/of_pci.h b/include/linux/of_pci.h
> index bb115de..6852481 100644
> --- a/include/linux/of_pci.h
> +++ b/include/linux/of_pci.h
> @@ -11,4 +11,7 @@ struct device_node;
>  struct device_node *of_pci_find_child_device(struct device_node *parent,
>  					     unsigned int devfn);
>  
> +void pci_process_bridge_OF_ranges(struct pci_controller *hose,
> +			struct device_node *dev, int primary);
> +
>  #endif
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux