Add a PCI quirk for VGA devices on Power to set the default VGA device.
Ensures a default VGA is always set if a graphics adapter is present,
even if firmware did not initialize it. If more than one graphics
adapter is present, ensure the one initialized by firmware is set
as the default VGA device. This ensures that X autoconfiguration
will work.
Signed-off-by: Brian King <brking@xxxxxxxxxxxxxxxxxx>
---
arch/powerpc/kernel/pci-common.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff -puN arch/powerpc/kernel/pci-common.c~powerpc_vga_default_device arch/powerpc/kernel/pci-common.c
--- linux/arch/powerpc/kernel/pci-common.c~powerpc_vga_default_device 2013-04-03 09:50:33.000000000 -0500
+++ linux-bjking1/arch/powerpc/kernel/pci-common.c 2013-04-03 09:50:33.000000000 -0500
@@ -30,6 +30,7 @@
#include <linux/irq.h>
#include <linux/vmalloc.h>
#include <linux/slab.h>
+#include <linux/vgaarb.h>
#include <asm/processor.h>
#include <asm/io.h>
@@ -1725,3 +1726,15 @@ static void fixup_hide_host_resource_fsl
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MOTOROLA, PCI_ANY_ID, fixup_hide_host_resource_fsl);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_FREESCALE, PCI_ANY_ID, fixup_hide_host_resource_fsl);
+
+static void fixup_vga(struct pci_dev *pdev)
+{
+ u16 cmd;
+
+ pci_read_config_word(pdev, PCI_COMMAND, &cmd);
+ if ((cmd & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) || !vga_default_device())
+ vga_set_default_device(pdev);
+
+}
+DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_DISPLAY_VGA, 8, fixup_vga);
_
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
