[PATCH 3/5] PCI: Use cached MSI cap while enabling MSI interrupts

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch intends to use the cached MSI capability offset in
pci_dev instead of polling that from config space when enabling
MSI interrupts.

Signed-off-by: Gavin Shan <shangw@xxxxxxxxxxxxxxxxxx>
---
 drivers/pci/msi.c |   19 +++++++++----------
 1 files changed, 9 insertions(+), 10 deletions(-)

diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 5f51e10..182474d 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -552,14 +552,14 @@ out_unroll:
 static int msi_capability_init(struct pci_dev *dev, int nvec)
 {
 	struct msi_desc *entry;
-	int pos, ret;
+	int ret;
 	u16 control;
 	unsigned mask;
 
-	pos = pci_find_capability(dev, PCI_CAP_ID_MSI);
-	msi_set_enable(dev, 0);	/* Disable MSI during set up */
+	/* Disable MSI during set up */
+	msi_set_enable(dev, 0);
 
-	pci_read_config_word(dev, msi_control_reg(pos), &control);
+	pci_read_config_word(dev, msi_control_reg(dev->msi_cap), &control);
 	/* MSI Entry Initialization */
 	entry = alloc_msi_entry(dev);
 	if (!entry)
@@ -570,9 +570,9 @@ static int msi_capability_init(struct pci_dev *dev, int nvec)
 	entry->msi_attrib.entry_nr	= 0;
 	entry->msi_attrib.maskbit	= is_mask_bit_support(control);
 	entry->msi_attrib.default_irq	= dev->irq;	/* Save IOAPIC IRQ */
-	entry->msi_attrib.pos		= pos;
+	entry->msi_attrib.pos		= dev->msi_cap;
 
-	entry->mask_pos = msi_mask_reg(pos, entry->msi_attrib.is_64);
+	entry->mask_pos = msi_mask_reg(dev->msi_cap, entry->msi_attrib.is_64);
 	/* All MSIs are unmasked by default, Mask them all */
 	if (entry->msi_attrib.maskbit)
 		pci_read_config_dword(dev, entry->mask_pos, &entry->masked);
@@ -818,13 +818,12 @@ static int pci_msi_check_device(struct pci_dev *dev, int nvec, int type)
  */
 int pci_enable_msi_block(struct pci_dev *dev, unsigned int nvec)
 {
-	int status, pos, maxvec;
+	int status, maxvec;
 	u16 msgctl;
 
-	pos = pci_find_capability(dev, PCI_CAP_ID_MSI);
-	if (!pos)
+	if (!dev->msi_cap)
 		return -EINVAL;
-	pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &msgctl);
+	pci_read_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, &msgctl);
 	maxvec = 1 << ((msgctl & PCI_MSI_FLAGS_QMASK) >> 1);
 	if (nvec > maxvec)
 		return maxvec;
-- 
1.7.5.4

--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux