Dear Arnd Bergmann, On Wed, 27 Mar 2013 18:07:50 +0000, Arnd Bergmann wrote: > > # /usr/sbin/lspci > > 00:01.0 PCI bridge: Marvell Technology Group Ltd. Device 7846 > > 00:02.0 PCI bridge: Marvell Technology Group Ltd. Device 7846 > > 01:00.0 SCSI storage controller: Marvell Technology Group Ltd. 88SX7042 PCI-e 4-port SATA-II (rev 02) > > 02:00.0 Ethernet controller: Intel Corporation 82572EI Gigabit Ethernet Controller (Copper) (rev 06) > > > > # cat /proc/cpuinfo | grep ^Hardware > > Hardware : Marvell Kirkwood (Flattened Device Tree) > > Very nice! Yeah, I find it quite nice too :) > > I've tested both the e1000e NIC card and the SATA 4 ports card and > > they work fine. > > I assume it works with PIO, but does the SATA card use the I/O > space registers, or just memory space? Both cards only use memory space. I have a quick and dirty patch for the e1000e driver that makes it read/write one particular register from the I/O space to test that it works, but I haven't checked this yet on Kirkwood. I don't expect much troubles, but who knows. As I said, this patch set is for now just to show that it works, there are some adjustments to be made here and there before those patches are ready to be merged. Best regards, Thomas -- Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
