On Tue, Mar 26, 2013 at 11:06:56PM +0100, Thomas Petazzoni wrote: > > The PCIe host driver just seems to get in the way, it has no knowledge > > it is adding to the process. > > > > irqchip knows: > > - what the physical address of the doorbell is > > - how to construct an address that is per-cpu or all-cpu > > - which bits in the doorbell registers are allocated and which are > > free > > > > pci has none of that info. > > Wait, wait. Did you look at the Tegra PCIe driver? In the Tegra case, > the MSI stuff is handled completely by the PCIe unit, and does not need > the special interaction with the IRQ controller driver that I need. Yes, but only briefly. It doesn't matter if the mechanisms are in the PCI-E register block or someplace else. If irqchip is providing the interface then the PCI-E driver would have to also instantiate an irqchip block. This is no different from what would be required to handle INTx on Marvell, the PCI-E driver would have to create a chained irqchip from the PEX interrupt and decode the cause register into INTA/B/C/D. > > > Again, I don't see how it's possible to not care whether it's MSI or > > > IPI. IPIs have to call handle_IPI() which is a ARM-specific call, and I > > > don't understand how handle_fasteoi_irq() would end up calling > > > handle_IPI(). > > > > - The main IRQ vector is entered, it decodes the main cause register > > and calls the handler for the doorbell > > - The doorbell handler is setup as a chained handler and it uses > > handle_fasteoi_irq to enter into armada_370_xp_handle_irq > > - armada_370_xp_handle_irq then runs through all bits and calls their > > handlers > > - the handler for IPI bits is associated with the IPI handler that > > simply calls handle_IPI(...) > > > > handle_fasteoi_irq acks's and clears the handled bits in the doorbell > > register at the proper time. > > Could you propose some code that implements this? The existing code > works fine, and is modeled after what the GIC IRQ driver is doing. I > don't say what you're proposing is not interesting, but just that it > looks like every time I come with some code, you're suggesting me to > 'reinvent' the whole world, and you've never come up with some code to > help in a direction or another. I'll send you my doorbell driver for Kirkwood - it doesn't attempt to generically solve the MSI problem, but the basic template shows how to wire up the doorbell concept to irqchip's generic code, and it works in the MSI role with lots of rather ugly hacking.. The XP driver is taking some small shortcuts because it only uses the doorbell for IPI.. Jason -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
