Re: [PATCH] ACPI / PM: Take unusual configurations of power resources into account (was: Re: [GIT PATCH] USB patches for 3.9-rc1)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> From: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
> Subject: ACPI / PM: Take unusual configurations of power resources into account
> 
> Commit d2e5f0c (ACPI / PCI: Rework the setup and cleanup of device
> wakeup) moved the initial disabling of system wakeup for PCI devices
> into a place where it can actually work and that exposed a hidden old
> issue with crap^Wunusual system designs where the same power
> resources are used for both wakeup power and device power control at
> run time.
> 
> Namely, say there is one power resource such that the ACPI power
> state D0 of a PCI device depends on that power resource (i.e. the
> device is in D0 when that power resource is "on") and it is used
> as a wakeup power resource for the same device.  Then, calling
> acpi_pci_sleep_wake(pci_dev, false) for the device in question will
> cause the reference counter of that power resource to drop to 0,
> which in turn will cause it to be turned off.  As a result, the
> device will go into D3cold at that point, although it should have
> stayed in D0.
> 
> As it turns out, that happens to USB controllers on some laptops
> and USB becomes unusable on those machines as a result, which is
> a major regression from v3.8.
> 
> To fix this problem, (1) increment the reference counters of wakup
> power resources during their initialization if they are "on"
> initially, (2) prevent acpi_disable_wakeup_device_power() from
> decrementing the reference counters of wakeup power resources that
> were not enabled for wakeup power previously, and (3) prevent
> acpi_enable_wakeup_device_power() from incrementing the reference
> counters of wakeup power resources that already are enabled for
> wakeup power.
> 
> In addition to that, if it is impossible to determine the initial
> states of wakeup power resources, avoid enabling wakeup for devices
> whose wakeup power depends on those power resources.
> 
> Reported-by: Dave Jones <davej@xxxxxxxxxx>
> Reported-by: Fabio Baltieri <fabio.baltieri@xxxxxxxxxx>
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>

Works just fine!

Tested-by: Fabio Baltieri <fabio.baltieri@xxxxxxxxxx>

Thanks,
Fabio

-- 
Fabio Baltieri
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux